Mustang W640R Battery Pack Instruction Manual
- June 10, 2024
- MUSTANG
Table of Contents
Mustang W640R Battery Pack
Installing/Removing the battery pack
To install the battery pack
- Slide the lock / unlock latches into the unlock position.
- Insert the battery pack as shown into the battery compartment until it clicks into place.
- Slide the lock / unlock latches into the lock position.
NOTE: Never attempt to install/remove the battery pack while the notebook pc is turned ON, as this may result in the loss of working data.
To remove the battery pack
- Slide the lock / unlock latches into the unlock position.
- Slide and hold the battery release latch into unlock position, then remove the battery pack.
CAUTION! Only use batteries that are approved by an authorized dealer. All batteries are not the same and therefore should not be treated as such. Using the wrong battery could cause serious damage to your notebook pc and yourself through toxic emissions.
CAUTION! The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Never remove the battery pack while the power is on as this may result in data loss when the system loses power.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>