beko CTB 6407 W EN Cooker Hood User Manual

beko CTB 6407 W EN Cooker Hood

DIMENSION

INSTALLATION

PRE-CAUTION

Cooker Hood User Manual

Product Information

• Model: CTB 6407 W
• Languages: EN – DE – ES – RU – SQ – BS – MK – SR – BG
• Symbols Used: C, A WARNING, WARNING, B WARNING, Protection class for electric shock
• Safety Instructions: General safety instructions must be followed while using the appliance to prevent any damage or risk to the user. The appliance should be repaired or replaced only by a dealer or authorized service center. The appliance should not be used by children under 8 years old or persons with physical, sensory, or mental disabilities without supervision or instruction concerning safe usage. Faulty or unqualified repair work may cause danger to the users.

Product Usage Instructions:

1. Read the user manual carefully before using the cooker hood.
2. Make sure that the appliance is installed and grounded properly following the instructions in the user manual.
3. Do not touch any parts that may become hot while cooking.
4. Do not leave the cooker hood unattended while in use.
5. Clean the appliance regularly following the instructions in the user manual to prevent any fire risk.
6. Do not use the appliance with fuel oil or gas devices such as room heaters.
7. Before installing the cooker hood, remove the protective films.

Please read this user manual first
Dear Valued Customer,
Thank you for preferring this Beko appliance. We hope that you get the best results from your appliance which has been manufactured with high quality and state-of-the-art technology. For this reason, please read this entire user manual and all other accompanying documents carefully before using the appliance and keep it as a reference for future use. If you handover the appliance to someone else, give the user manual as well. Follow the instructions by paying attention to all the information and warnings in the user manual.
Remember that this user manual may also apply to other models. Differences between models are explicitly described in the manual.

Meanings of the Symbols
Following symbols are used in various sections of this user manual:

INFO: Important information and useful hints about usage.
WARNING: Warnings against dangerous situations concerning the security of life and property.Warning for danger of fire.Warning for electric shock.
Protection class for electric shock.

Important safety and environmental instructions

General Safety
Important Safety Instructions Read Carefully And Keep For Future Reference This section con-tains safety instructions that will help protect from risk of fire, electric shock, exposure to leak microwa-ve energy, personal injury or property damage. Failure to follow these instructions shall void any warranty.

• Beko products comply with the applicable safety standards; therefore, in case of any damage on the appliance or power cable, it should be repaired or replaced by the dealer, service center or a specia-list and authorized service alike to avoid any danger. Faulty or unqualified repair work may be dangerous and cause risk to the user.

• This appliance is intended to be used in household and similar applications such as:

  • Staff kitchen areas in shops, offices and other working environments;
  • Farm houses
  • By clients in hotels, and other residential type environments;
  • Bed and Breakfast type environments.

• Operate the appliance for its intended purpose only as described in this manual. The manufacturer cannot be held liable for damages resulting from improper installation or misuse of the product.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or men-tal capabilities or lack of experience and knowledge if they have been given su-pervision or instruction concerning use of the app-liance in a safe way and understand the hazards involved.

• Children shall not be allo-wed play with the appli-ance. Cleaning and user maintenance shall not be made by children without supervision.

• The minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of your product must be at least 65 cm.

• If the instructions for ins-tallation for the gas hob specify a greater distance, this has to be taken into account.

• Make sure that your mains power supply complies with the information supp-lied on the rating plate of the appliance.

• Never use the appliance if the power cable or the app-liance itself is damaged.

• Prevent damage to the power cable by not squee-zing, bending, or rubbing it on sharp edges. Keep the power cable away from hot surfaces and naked flame.

• Use the appliance with a grounded outlet only.
  WARNING : Do not connect the appliance to the mains until the installation is fully complete.

• Place the appliance in a way so that the plug is always accessible.

• Do not touch the lamps if they have operated for a long time. They can burn your hands since they will be hot.

• Follow the regulations set out by competent autho-rities on discharge of the exhaust air (this warning is not applicable for use without flue).

• Operate your appliance after putting a pot, pan etc. on the hob. Otherwise, high heat may cause de-formation in some parts of your product.

• Turn off the hob before ta-king the pot, pan etc. from it.

• Do not leave hot oil on the hob. Pans with hot oil may cause self combustion.

• Pay attention to your cur-tains and covers since oil may catch fire while coo-king food such as fries.

• Grease filter must be clea-ned at least monthly. Car-bon filter must be replaced at least every 3 months.

• Product shall be cleaned accordance with user ma-nual. If cleaning was not carried out in accordance with user manual, there may be fire risk.

• Do not use non-fire-resistant filtering materials instead of the current filter.

• Only use the original parts or parts recommended by the manufacturer.

• Do not operate the product without the filter and do not remove the filters while the product is running.

• In the event of be started any flame, de-energize your product and cooking appliances.

• In the event of be started any flame, cover the flame and never use water to ex-tinguish.

• Unplug the appliance be-fore each cleaning and when the appliance is not in use.

• The negative pressure in the environment should not ex-ceed 4 Pa (4×10 bar) while the hood for electric hob and appliances running on another type of energy but electricity operate simulta-neously.

• In the environment where the appliance is being used, the exhaust of devi-ces running on fuel oil or gas, such as room heater must be absolutely isola-ted or device must be her-metical type.

• • When connecting the flue, use pipes with a diameter of 120 or 150 mm. Pipe connection must be as short as possible and have as few elbows as possible.

• Danger of choking! Keep all the packaging materi-als away from children.
  CAUTION: Accessible parts may become hot when used with cooking appliances.

• The product outlet must not be connected to air channels that include other smoke.

• The ventilation in the room may be insufficient when the hood for electric hob is used simultaneously with the devices operating on gas or other fuels (this may not apply to applian-ces that only discharge the air back into the room). Objects placed on the pro-duct may fall. Do not place any objects on the pro-duct.

• Do not flambe under the your product.
  WARNING: Before installing the Hood, remove the pro-tective films.

• Never leave high naked fla-mes under the hood when it is in operation

• Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames.

Compliance with the WEEE Directive and Disposing of the Waste Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for was-te electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to offi- cal collection point for recycling of elect-rical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was puchased. Each house-hold performs important role in recove-ring and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative conse- quences for the environment and human health.

Compliance with RoHS Directive
The product you have purchased compli-es with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibi-ted materials specified in the Directive.

Package Information
Packaging materials of the pro-duct are manufactured from recyclable materials in accor-dance with our National Environment Regulations. Do not dispo-se of the packaging
materials together with the domestic or other wastes. Take them to the packaging material collecti-on points designated by the local autho-rities.

General appearance

Overview

1. Main Body
2. Grease filter
3. Lighting
4. Control Panel
5. Chimney

Technical data

Using the appliance

Controls panel

• L : Light: Switches the lighting system on and off

• M : Motor: Switches the extractor motor on and off

• V : Speed: Sets the operating speed of the extractor:

  • Low speed, used for a continuous and silent air change in the presence of light cooking vapour.
  • Medium speed, suitable for most operating conditions given the optimum treated air flow/noise level ratio.
  • Maximum speed, used for eliminating the highest cooking vapour emission, including long periods.

• The extractor hood has been designed exclusively for domestic use to eliminate kitchen smells.

• Never use the hood for purposes other than for which it has been designed.

• Never leave high naked flames under the hood when it is in operation.

• Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides.

• Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames.

Efficient use in terms of energy saving

• When using your appliance, adjust the speed settings according to vapour and odour intensity, in order to save energy.
• Use low speeds (1-2) under normal conditions, and high speed (3) and boost mode for intense odour and vapour.
• The hood is equipped with lamps in order to illuminate the cooking area.
• Using them for environmental lighting shall cause unnecessary energy expenditure and insufficient lighting.
• For your device to consume less energy, run it at a low speed level.
• Your device will reduce energy consumption as it will run more efficiently when you provide sufficient air intake to it.
• Set your device to the intense suction power level before the formation of steam, in cases where you know that the dense steam will occur. So, you reduce energy consumption by using your device for a shorter time as it will have a sufficient air intake.
• Keep the lids of the cookware closed to reduce the steam evolving.

Operating the Hood

• Hood is equipped with a motor having various speed settings.

• For a better performance, we advise you to use low speeds in normal condi-tions, and high speeds when smell and vapors are intensified.
  You can start the hood by pressing the desired speed level key.(V1,V2,V3)

• You can illuminate the cooking area by pressing the light key (L)

Lamp replacement

• Before replacing the light bulbs, disconnect the power supply of the hood.
• Do not touch the light bulbs when they are hot.
• Be careful not to touch the replaced light bulb directly with hands.

INFO: You may procure lamps from Authorised Service Agents.

This product contains a light source of energy efficiency class “F”.

Operation with flue connection

• Vapour is extracted thro-ugh the flue duct, which is fastened to the connec-tion head on the hood.
• The diameter of the flue duct must be the same as the connection ring. In ho-rizontal settings, the pipe has to have a slight upward slope (around 10º) so that the air can exit the room easily.

Operation without flue connection

• Air is filtered through the carbon filter and recircu-lated in the room. Carbon filter is used when it is im-possible to use a flue in the house.
  

• In flueless use, remove the flaps inside the flue adapter.

• Remove the oil filter. To install the car-bon filter, fit the filter to the tabs by centring it on the plastic piece on both sides of the fan body. Tighten it by tur-ning right or  left.

• Replace aluminium oil filter.

Cleaning and maintenance

The device should be cleaned and main-tained regularly. Failure to keep the devi-ce clean will adversely affect the service life of the device. For cleaning and main-tenance, follow the instructions stated in the manual.

INFO: Before cleaning and mainte-nance, unplug the product or turn off the switch.

Non-compliance with the pro-visions associated with the cleaning of the device and replacement of the filters may result in a risk of fire. Therefore, it is recommended to follow the guidelines sta-ted here. The manufacturer is not responsible for the engine damages or fires originating from the improper use.

Clean using only a cloth dampened with a neutral liquid detergent. Do not use ab-rasive products or alcohol.

Cleaning of grease filter
This filter captures particles in the air. You are recommended to clean your fil-ter every month under normal usage con-ditions. First remove the grease filters for this process. Wash the filters with liqu-id detergent and rinse them with water and install them back after they get dry. Grease filters may get discolered as they are washed; this is normal and you don’t need to change your filter.

INFO: You can wash the grease fil-ter in the dishwasher
CAUTION: In case of normal use, clean your filter once in a month.

Changing of Carbon Filter (Air Circulation Mode)
The hood can be fitted with an active car-bon filter. The carbon filter is applied only in case the hood is not connected to the vent duct.

WARNING

• The carbon filter is never washed.
• Replace carbon filters once every 3 months.
• Carbon filter is available from Authorized Services.

Setting up the device

• WARNING: Before starting the installation, read the safety information on user manual.
• WARNING: Failure to install with screws and stabilizers in accordance with these ins-tructions may result in elect-ric shock.
• INFO: Please refer to page 130 for the installation guide.

For the installation of the hood, please contact the nearest Authorized Service.
It is the customer’s responsibility to pre-pare the location and electrical installati-on of the hood.

Position of the appliance

• Distance between the cooker and the cooker hood must be considered prior to assembly. This distance should be 65 cm.
• Distance must be measured from the surface of grate for gas cookers, from surface of glass for electric cookers.

Installation accessories

1. Hood
2. 4 X 4,2 X 44,4 screws
3. User manual

Storage

• If you do not intend to use the appli-ance for a long time, please store it carefully.
• Please make sure that the appliance is unplugged, cooled down and totally dry.
• Store the appliance in a cool and dry place.
• Keep the appliance out of the reach of children

Handling and transportation

• During handling and transportation, carry the appliance in its original pac-kaging. The packaging of the appliance protects it against physical damages.
• Do not place heavy loads on the appli-ance or the packaging. The appliance may be damaged.
• Dropping the appliance will render it non-operational or cause permanent damage.

Troubleshooting

it work.
The product does not work.| Check the electrical con- nection.| The mains voltage should be betwe- en 220-240 V.
The product does not work.| Check the electrical con- nection.| Check if the other products in your kitchen are working or not.
The lighting lamp does not work.| Check the electrical con- nection.| The mains voltage should be betwe- en 220-240 V.
The lighting lamp does not work.| Check the lamp switch.| The lamp switch should be in the “on” position.
The lighting lamp does not work.| Check the lamps.| The lamps of the product should not be faulty.
The air intake of the product is poor.| Check the aluminum filter.| The aluminum filter should be cleaned at least once a month under normal conditions.
The air intake of the product is poor.| Check the air vent flue.| The air vent flue should be in the ”on” position.
The air intake of the product is poor.| Check the carbon filter.| For products with carbon filters, the filter should normally be changed every 3 months.

www.beko.com

References

• Beko Global

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>