DEWALT 2-196 10 cu. ft. Swivel Cart Instruction Manual
- June 11, 2024
- Dewalt
Table of Contents
10 cu. ft. Swivel Cart
INSTRUCTION MANUAL
Definitions: Safety Alert Symbols and Words
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Used without word indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not
avoided, may result in property damage.
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in serious injury.
WARNING: To reduce the risk of injury, read the instruction manual.
| DESCRIPTION | PART # | QTY. |
|---|---|---|
| 1 Poly Bed | 2-196 | 1 |
| 2 Frame | 6-58YL1 | 1 |
| 3 Axle | 6-59YL1 | 1 |
| 4 Front Tongue | 2-434YL1 | 1 |
| 5 Rear Tongue | 6-891YL1 | 1 |
| 6 Wheel | 42159G | 2 |
| 7 Handle Support Plate | 2-625YL1 | 1 |
| 8 Ass’y, Handle w/Grip | 6-819 | 2 |
| 9 Hitch Bracket | 23687-CBL3 | 1 |
| 10 Foot Pedal Latch | 28258-CBL3 | 1 |
| 11 Stand Bracket | 2-437YL1 | 1 |
| 12 Pivot Clevis | 28750YL1 | 1 |
| DESCRIPTION | PART # | QTY. |
|---|---|---|
| A BOLT, 1/2-20 X 1-1/8 | 47363 | 1 |
| B BOLT, HEX 1/2-13 X 2-3/4 GR5 | 43510 | 2 |
| C BOLT, HEX 3/8-16 X 1 GR5 | 43001 | 2 |
| D BOLT, HEX 3/8-16 X 2-1/2 GR5 | 43432 | 4 |
| E BOLT, HEX 3/8-16 X 3-1/4 GR5 | 46938 | 2 |
| F BOLT, HEX 5/16-18 X 1 G5 | 43063 | 2 |
| G BOLT, HEX 5/16-18 X 1-1/2 G5 | 43085 | 4 |
| H BOLT, HEX 5/16-18 X 3 GR5 | 46782 | 1 |
| I BOLT, TRUSSHEAD 3/8-16 X 1.75 | Feb-96 | 4 |
| J NUT, HEX .312-18 NYLOC | 47810 | 8 |
| K NUT, HEX 1/2-13 NYLOCK | 41657 | 3 |
| L NUT, HEX 1/2-20 JAM | HA124934 | 1 |
| M NUT, HEX 3/8-16 NYLOC | HA21362 | 11 |
| N WASHER, .378 X 1.25 X .061 | 141 | 4 |
| O WASHER, .531 X 1.5 X .134 | R19172410 | 1 |
| P WASHER, .656 X 1.25 X .059 | R19212016 | 1 |
| Q WASHER, 1″ SAE 1.06 X 2 X .13 | 43528 | 4 |
| R WASHER, LOC 1/2 | 43353 | 1 |
| S BOLT, 1/2-13 X 3.25 | Apr-48 | 1 |
| T PIN, CLEVIS 1/2 X 1-3/4 | HA23638 | 1 |
| U PIN, CLEVIS 3/8 X 3 w/LOOP | 2-626 | 1 |
| V PIN, COTTER 3/16 X 2 | 46855 | 4 |
| X PIN, HAIR COTTER 3/32 X 2-5/1 | 43343 | 1 |
| Y PIN, HAIR COTTER 5/32 X 3 | 714-0117 | 1 |
| Z PLUG, 1 SQ X 16 GA | 41778 | 2 |
| AA SCREW, RH SLOT 5/16-18 X 1.0 | 42673 | 1 |
| BB SPACER, .310ID X .560OD X .36 | 23727 | 1 |
| CC SPACER, 1/2 OD X 14 GA X .87 | Apr-49 | 2 |
| DD SPRING, EXTENSION PLTD | 47408 | 1 |
| EE SPRING PULLER (NOT SHOWN) | 47622 | 1 |
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS TRACTOR CART
When using this tractor cart, basic safety precautions should always be
followed:
WARNING: When the tractor cart is connected to, or being towed by, a
tractor or lawnmower (hereafter referred to as “towing vehicle”), follow all
the towing vehicle manufacturer’s safety and operating instructions related to
the towing vehicle and to the towing operation for a conveyance such as a
tractor cart.
WARNING: Read all safety warnings and all instructions. Failure to follow
the warnings and safety instructions may result in serious injury. All safety
precautions should be followed to reduce risk of personal injury or property
damage, including but not limited to the following:
-
This tractor cart is intended for use as a lawn and garden utility cart. Use only as intended. Use only the parts provided to assemble the tractor cart.
-
Maintain control of the tractor cart, and any towing vehicle if connected to the tractor cart, at all times.
-
Do not allow the tractor cart to carry human or animal passengers. Keep children, bystanders, and animals away from the work area when using the tractor cart.
-
Stay alert. Keep hair, loose clothing, fingers, and all body parts away from openings and moving parts, whether the tractor cart is stationary or in motion.
Use common sense. Be aware of surroundings. -
Do not exceed the braking capability of the towing vehicle. The weight of the load in the tractor cart, or a shift in the load, could affect the braking capability and/or the stability of the towing vehicle.
-
Do not exceed the tractor cart maximum towing speed of 5 mph (8 km/h), or the towing vehicle’s maximum towing speed, whichever is lower.
-
Do not exceed the maximum load capacity of 800 lbs (363 kg) when towing (or the towing vehicle’s maximum load capacity, whichever is lower), 350 lbs (159 kg) when using swivel feature, or 150 lbs (68 kg) when using wheelbarrow feature.
-
Do not exceed the tractor cart tire maximum inflation printed on the side of the tire.
-
Do not use the tractor cart on the highway or on other regulated roadways.
-
Do not use the tractor cart on a steep slope or incline, or on a grade greater than 10°.
-
Do not use the tractor cart if it is showing signs of malfunction in any way, if the tractor cart is not working correctly, has been damaged, or has experienced physical impact.
-
Avoid exposing the tractor cart to flammable or corrosive materials. Do not burn materials in the tractor cart bed or expose the tractor cart to burning materials or damaging chemicals.
-
Maintain the tractor cart with care. Follow instructions for proper cleaning, maintenance, and storage.
-
Store when not in use. Follow recommended storage instructions when not in use.
Additional Safety Instructions
WARNING: ALWAYS use safety glasses and other personal protection
equipment (PPE) during assembly, use, cleaning, or maintenance activities.
Everyday eyeglasses are NOT safety glasses. ALWAYS WEAR CERTIFIED SAFETY
EQUIPMENT (ANSI Z87.1 eye protection (CAN/CSA Z94.3)).
CAUTION: Before performing any cleaning or maintenance activities, ensure
the tractor cart is detached from any towing vehicle. Ensure the tractor cart
is on level ground and immobilized. Do not attempt to clean or perform
maintenance to the tractor cart while it is in motion.
SAVE THESE INSTRUCTIONS
WARNING
- DO NOT CARRY PASSENGERS
- DO NOT EXCEED MAXIMUM TOWING SPEED
- NOT FOR HIGHWAY USE
- DO NOT EXCEED LOAD CAPACITY
- STAY OFF STEEP SLOPES AND GRADES
- VEHICLE BRAKING AND STABILITY WILL BE AFFECTED BY HEAVY LOADS
- REFER TO MANUAL FOR FULL INSTRUCTIONS 46991
OPERATION
After the tractor cart assembly is complete, consult the towing vehicle manufacturer’s instructions to connect or hitch the tractor cart to the towing vehicle.
When loading material in the tractor cart:
- Place heavier items in the bottom of the tractor cart, and toward the front (closer to the towing vehicle and cart tongue).
- Place lighter, smaller items near the rear and on top.
- Secure loose material in the tractor cart.
If backing up the tractor cart while attached to a towing vehicle, reduce speed and braking to avoid jackknifing the tractor cart.
Tow Cart
-
To convert the cart from push to tow: (See figure 13 on page 6.)
a. Remove the 3/8 in. x 3 in. clevis pin (U) and hairpin cotter (X) from the front tongue.
b. Pivot the front tongue outward and secure it in the towing position using the 3/8 in. x 3 in. clevis pin (U) and hairpin cotter (X). -
Refer to the vehicle owners manual for instructions on safe operation on slopes.
-
Always test to make sure your tractor has adequate towing and braking capabilities whenever hauling a substantial amount of weight in your cart. Use extra caution when
operating on slopes.
WARNING:
Do Not Exceed 300 lb (136 kg) weight capacity of cart. One cubic foot of dirt weighs approximately 80 lbs (36 kg).
CAUTION:
Vehicle braking and stability may be affected with the addition of an accessory or an attachment. Be aware of changing conditions on slopes. -
For best handling and traction, distribute the weight of the load evenly in the cart.
-
To dump material from the cart, remove the 1-3/4 in. long clevis pin (T) from the latch on the tongue and release the latch. The cart bed will then tilt backwards to empty its contents. After emptying, pull the front of the bed down toward the cart tongue until the latch snaps into place.
Reinstall the clevis pin in the latch to prevent accidental release of the latch. -
The maximum towing speed for this cart is 5 mph (8 km/h).
Push Cart
WARNING:
Leave the clevis pin in the latch lock at all times while using the cart as a
push cart.
-
To convert the cart from tow to push: (See figure 13 on page 6)
a. Remove the 3/8 in. x 3 in. clevis pin (U) and hairpin cotter (X) from the front tongue.
b. Pivot the front tongue into the storage position underneath the rear tongue and secure it using the 3/8 in. x 3 in. clevis pin (U) and hairpin cotter (X). -
For best handling and to help prevent accidental tipping, distribute the weight of the load evenly in the cart.
-
Do not load more than you can handle and control comfortably (no more than150 lbs (68 kg)).
-
To dump material from the push cart, lift up on the handle and tilt the cart forward. Be sure that the latch mechanism on the tongue is locked and secured with the clevis pin to prevent accidental release of the latch.
CLEANING
NOTICE:
Never use solvents or other harsh chemicals to clean the tractor cart. These
chemicals may weaken the component materials.
Wipe down exposed components, including the bed interior, after use and/or
before storage. Use a cloth dampened only with water and mild soap.
STORAGE
Store the tractor cart in a dry location out of direct sunlight and away from any sources of moisture.
MAINTENANCE
Use a bicycle or similar hand pump to maintain the tire pressure printed on
the side of the tire.
WARNING: Do not exceed the tractor cart tire maximum inflation printed on
the side of the tire.
REGISTER ONLINE
Thank you for your purchase. Register your product now for:
- WARRANTY SERVICE: Registering your product will help you obtain more efficient warranty service in case there is a problem with your product.
- CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft, your registration of ownership will serve as your proof of purchase.
- FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act.
Register online at www.dewalt.com/register.
Three Year Limited Warranty
The warranty of this product is covered by: Agri-Fab, Inc.
800-448-9282
This three (3) year limited warranty gives you, the original product
purchaser, specific legal rights. You may also have other rights, which vary
from state to state.
Agri-Fab, Inc. (Agri-Fab) warrants to the original product purchaser, that
each product will be free from defects in material and workmanship, under
normal use and conditions, for a period of three (3) years from the date of
purchase. Agri-Fab makes no other express warranties, and all implied
warranties, including fitness and merchantability, are limited to three (3)
years from the date of shipment from Agri-Fab.
If the product fails to function as intended, call our customer support
hotline at +1-800-448-9282. Within the
warranty period, Agri-Fab will repair or replace any part found to be
defective upon our examination.
Agri-Fab reserves the right to require the return of the defective product
with the proof of purchase to establish a claim under this warranty. The
warranty period is not extended if we repair or replace the product. All
shipping expenses will be covered by the customer.
This limited warranty does not cover any damage or defect resulting from
transportation, storage, maintenance, improper use, negligence, accident,
normal wear, alterations, or operation or any other activity or action which
is not in accordance with the instruction manual. Any parts that are deemed
wearable parts are not part of the limited warranty.
In no event shall Agri-Fab be liable for any incidental, special,
consequential or punitive damages, or for any attorney fees, expenses, losses
or delays alleged to be as a consequence of any damage to, failure of, or
inadequate product training, but not limited to, any claims for loss of
profits.
NOTE:
Limitations on duration of implied warranty and/or consequential damages might
not apply to you if your state does not permit them. This warranty gives you
specific legal rights in addition to rights you may have under state law.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your DEWALT Cart
for any reason, you can return it within 90 days from the date of purchase
with a receipt for a full refund – no questions asked.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible
or are missing, call 315-736-0037 for a
free replacement.
| REF. | QT Y. | PART # | DESCRIPTION |
|---|---|---|---|
| 1 | 1 | 2-196 | POLY BED |
| 2 | 1 | 6-58YL1 | ASS’Y, FRAME |
| 3 | 1 | 6-59YL1 | ASS’Y, AXLE |
| 4 | 1 | 28750YL1 | CLEVIS, PIVOT |
| 5 | 1 | 6-891YL1 | TONGUE, REAR |
| 6 | 1 | 2-434YL1 | TONGUE, FRONT |
| 7 | 1 | 28258-CBL3 | LATCH, FOOT PEDAL |
| 8 | 1 | 23687-CBL3 | BRACKET, HITCH |
| 9 | 2 | 2-436 | TUBE, HANDLE |
| 10 | 2 | 2-624 | GRIP, 1″ W/DEWALT LOGO |
| 11 | 1 | 2-437YL1 | BRACKET, STAND |
| 12 | 1 | 2-625YL1 | PLATE, HANDLE SUPPORT |
| 13 | 1 | Apr-48 | BOLT, 1/2-13 X 3.25 |
| 14 | 4 | 43528 | WASHER, 1″ SAE 1.06 X 2 X .13 |
| 15 | 3 | 41657 | NUT, HEX 1/2-13 NYLOCK |
| 16 | 1 | HA23638 | PIN, CLEVIS 1/2 X 1-3/4 |
| 17 | 1 | 714-0117 | PIN, HAIR COTTER 5/32 X 3 |
| 18 | 11 | HA21362 | NUT, HEX 3/8-16 NYLOC |
| 19 | — | — | — |
| 20 | 2 | 41778 | PLUG, 1 SQ X 16 GA |
| 21 | 4 | 46855 | PIN, COTTER 3/16 X 2 |
| 22 | 2 | 43001 | BOLT, HEX 3/8-16 X 1 GR5 |
| 23 | 4 | Feb-96 | BOLT, TRUSSHEAD 3/8-16 X 1.75 |
| 24 | 1 | R19212016 | WASHER, .656 X 1.25 X .059 |
| 25 | 1 | 47363 | BOLT, 1/2-20 X 1-1/8 |
| 26 | 1 | R19172410 | WASHER, .531 X 1.5 X .134 |
| 27 | 1 | 43353 | WASHER, LOC 1/2 |
| 28 | 1 | HA124934 | NUT, HEX 1/2-20 JAM |
| 29 | 2 | 43510 | BOLT, HEX 1/2-13 X 2-3/4 GR5 |
| 30 | 4 | 141 | WASHER, .378 X 1.25 X .061 |
| 31 | 8 | 47810 | NUT, HEX .312-18 NYLOC |
| 32 | 1 | 46782 | BOLT, HEX 5/16-18 X 3 GR5 |
| 33 | 2 | Apr-49 | SPACER, 1/2 OD X 14 GA X .87 |
| 34 | 1 | 47408 | SPRING, EXTENSION PLTD |
| 35 | 1 | 47622 | SPRING PULLER (NOT SHOWN) |
| 36 | 1 | 23727 | SPACER, .310 ID X .560 OD X .36 |
| 37 | 1 | 42673 | SCREW, RH SLOT 5/16-18 X 1.0 |
| 38 | 1 | 46938 | BOLT, HEX 3/8-16 X 3-1/4 GR5 |
| 39 | 1 | 2-626 | PIN, CLEVIS 3/8″ X 3″ W/LOOP |
| 40 | 1 | 43343 | PIN, HAIR COTTER 3/32 X 2-5/1 |
| 41 | 2 | 43063 | BOLT, HEX 5/16-18 X 1 G5 |
| 42 | 4 | 43432 | BOLT, HEX 3/8-16 X 2-1/2 GR5 |
| 43 | 4 | 43085 | BOLT, HEX 5/16-18 X 1-1/2 G5 |
| 44 | 2 | 42159G | WHEEL |
© 2022 DEWALT
DEWALT® and GUARANTEED TOUGH® are registered trademarks of the DEWALT
Industrial Tool Co., used under license. All rights reserved.
The yellow and black color scheme is a trademark for DEWALT Power Tools and
Accessories. Made in China
Manufactured under license and distributed by:
Agri-Fab, Inc.
809 South Hamilton
Sullivan, IL. 61951 U.S.A.
Phone: 217-728-8388
www.agri-fab.com
Agri-Fab, Inc. 809 South Hamilton Sullivan, IL. 61951 U.S.A.
(DEC22) Part No. 3-193 DXTB0573 Copyright © 2022 Agri-Fab
DEWALT®, GUARANTEED TOUGH® and the yellow/black color scheme are trademarks
for DEWALT power tools, outdoor equipment, accessories, anchors and concrete
adhesives and used under license.
Product may differ from that pictured. Does not affect function.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>