All the Rages 3 Pk Aged Brass Lamp Set Instruction Manual

All the Rages 3 Pk Aged Brass Lamp Set

Product Information

The 3 Pk Aged Brass Lamp Set is a set of three lamps made of brass material. The set includes a floor lamp, a table lamp, and a desk lamp. Each lamp requires 1 x 100W 3-Way Medium Base Type A bulb, which is not included in the set. The lamps have a maximum wattage of 100W and are 3-way lamps.

Product Assembly Instructions

1. Unpack the lamp set and identify the parts.
2. Attach the lampshade (D) to the harp saddle (C).
3. Place the harp saddle (C) onto the harp (E) and secure it with the finial base (F).
4. Screw the finial (H) onto the finial base (F) and attach it to the harp (E).
5. Install the bulb. Only use bulbs of specified type and maximum rated wattage or less.
6. Plug the electrical supply cord into the wall outlet.

Product Cleaning and Maintenance

1. Unplug the fixture before cleaning.
2. Use a clean, dry, soft, lint-free cloth to clean the lamps.
3. Do not use water or other chemical cleaning agents.

Note: Failure to follow these instructions may cause damage to the lamps and void the warranty.

Product Limited Warranty

The 3 Pk Aged Brass Lamp Set is manufactured by All The Rages Inc and comes with a limited warranty. For more information about the warranty, contact All The Rages Inc at 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039 or visit their website at www.alltherages.com. The product is printed in China.

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized out let only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter this safety feature. This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids. Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.

ASSEMBLY INSTRUCTIONS

TABLE LAMP

1. Screw lamp body (A) to the lamp base (B.
2. Screw the socket (D) to the lamp body (A
3. Squeeze the Harp (C) and insert into the Saddle of Socket (D).
4. Remove the protective plastic from the Lamp Shade (E) and attach to the Harp (C) by screwing the Finial (F) to the Harp (C).
5. Install bulb. Only use bulbs of specified type and maximum rated wattage or less.
6. Plug the electrical supply cord into the wall outlet.

FLOOR LAMP

1. Screw pole (A) to base (B), then screw pole (C) to pole (A
2. Screw lamp body (D) to pole (C), then screw socket (F) to lamp body (D).
3. Squeeze the harp (E) and insert into the saddle of socket (F).
4. Remove the protective plastic from the lamp shade (G) and attach to the harp (E) by screwing the finial (H) to the harp (E).
5. Install bulb. Only use bulbs of specified type and maximum rated wattage or less.
6. Plug the electrical supply cord into the wall outlet.

CLEANING & MAINTENANCE

1. Unplug the fixture before cleaning.
2. Use a clean, dry, soft, lint-free cloth.
3. Do not use water or other chemical cleaning agents.

Each Requires 1 x 100W 3-Way Medium Base Type A bulb (not included)

LIMITED WARRANTY

All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039 (All the Rages) warrants its products (the “products”) as follows:

1. Limited Warranty.
   • Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. If the products do not conform to this Limited Warranty during the warranty period (as herein above specified), Buyer shall notify Manufacturer in writing of the claimed defects and demonstrate to Manufacturer’s satisfaction that said defects are covered by this Limited Warranty. If the defects and proof of purchase are properly reported to Manufacturer within the warranty period, and the defects are of such type and nature as to be covered by this warranty, Manufacturer shall, as its own expense, furnish replacement products or, at Manufacturer’s option, replacement parts for the defective products. Installation of the replacement products or replacement parts shall be at Buyer’s expense.
2. Exclusive Obligation:
   • THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of Manufacturer shall be to repair or replace the defective products in the manner and for the period provided above. Manufacturer shall not have any other obligation with respect to the products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall Manufacturer be liable for incidental, special, or consequential damages.
3. Other Statements.
   • Manufacturer’s employees or representatives’ oral or other written statements do not constitute warranties, shall not be relied upon by Buyer, and are not part of the contract for sale or this limited warranty.
4. Entire Obligation.
   • This Limited Warranty states the entire obligation of Manufacturer with respects to the products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect.

ALL THE RAGES INC

• 355 EISENHOWER PARKWAY SUITE 101 LIVINGSTON, NJ 07039
• WWW.ALLTHERAGES.COM
• PRINTED IN CHINA

References

• Home | All The Rages

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>