All the Rages 3 Pk Stamped Bronze Lamp Set Instruction Manual

All the Rages 3 Pk Stamped Bronze Lamp Set

Product Information

The 3 Pk Stamped Bronze Lamp Set is a set of three lamps that are designed to be used in a living room, bedroom or any other space where you would like to add some extra lighting. These lamps are made of high-quality bronze and are stamped with a unique design that adds a touch of elegance to any room. The lamps require one 100W 3-Way Medium Base Type A bulb each, which is not included in the set. The maximum rated wattage for each lamp is 100W.

Product Usage Instructions

Before using the lamps, make sure to purchase the required bulbs and read the instructions carefully. Follow the steps below to use the lamps:

1. Place the lamp on a flat, stable surface.
2. Insert one 100W 3-Way Medium Base Type A bulb into the lamp.
3. Plug the electrical supply cord into the lamp.
4. Make sure the lamp switch is in the “off” position.
5. Plug the electrical supply cord into the wall outlet.
6. Turn on the lamp switch to activate the lighting.

Cleaning and Maintenance Instructions

To ensure that your lamps remain in good condition, follow these cleaning and maintenance instructions:

1. Unplug the fixture before cleaning.
2. Use a clean, dry, soft, lint-free cloth to wipe down the lamp.
3. Do not use water or other chemical cleaning agents as they may damage the lamp.

Limited Warranty

The lamps come with a limited warranty offered by ALL THE RAGES INC. For more information about the warranty, refer to the contact details provided in the user manual.

Questions
E-mail our customer service department at [email protected] .

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the e plug can be fully inserted. Do not alter this safety feature. This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids. Never cover the lamp with any object including cloth or p aper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.

ASSEMBLY INSTRUCTIONS

TABLE LAMP:

1. Squeeze the harp and insert into the saddle of socket.

2. Remove the protective plastic from the lamp shade and attach to the harp by screwing the finial to the harp.

3. Install bulb. Only use bulbs of specified type and maximum rated wattage or less.

4. Plug the electrical supply cord into the wall outlet.
   FLOOR LAMP:

5. Screw pole (A) to base (8), then screw pole (C) to pole (A).

6. Screw pole (D) to pole C, screw lamp body (E) to pole (D), then screw socket (G) to lamp body (E).

7. Squeeze the harp (F) and insert it into the saddle of socke! (G). Remoye the protectivp olastic from the lamo shade H and attach to the harp (F by screwing the finial U to the harp (F).

8. Install bulb. Only use bulbs of a specified type and maximum rated wattage or less
   b. Plug the electrical supply cord into the wall outlet.

CLEANING & MAINTENANCE:

1. Unplug the fixture before cleaning.
2. Use a clean, dry, soft, lint-free cloth.
3. Do not use water or other chemical cleaning agents. Each Requires 1 x 100W 3-Way Medium Base Type A bulb (not included)

LIMITED WARRANTY

All the Rages Inc, a New Jersey corporation, having its principal place of business at 355 Eisenhower Parkway Suite 101 Livingston, NJ 07039 (All the Rages) warrants its products (the “products”) as follows:

1. Limited Warranty
   Manufacturer warrants that the products sold hereunder will be free from defects in material and workmanship for a period of one (1) year from the date of purchase. If the products do not conform to this Limited Warranty during the warranty period (as herein above specified), Buyer shall notify Manufacturer in writing of the claimed defects and demonstrate to Manufacturer’s satisfaction that said defects are covered by this Limited Warranty. If the defects and proof of purchase are properly reported to Manufacturer within the warranty period, and the defects are of such type and nature as to be covered by this warranty, Manufacturer shall, as its own expense, furnish replacement products or, at Manufacturer’s option, replacement parts for the defective products.
   Installation of the replacement products or replacement parts shall be at Buyer’s expense.

2. Exclusive Obligation
   THIS WARRANTY IS EXCLUSIVE. The sole and exclusive obligation of Manufacturer shall be to repair or replace the defective products in the manner and for the period provided above. Manufacturer shall not have any other obligation with respect to the products or any part thereof, whether based on contract, tort, strict liability or otherwise. Under no circumstances, whether based on this Limited Warranty or otherwise, shall Manufacturer be liable for incidental, special, or consequential damages.

3. Other Statements
   Manufacturer’s employees or representatives’ oral or other written statements do not constitute warranties, shall not be relied upon by Buyer, and are not part of the contract for sale or this limited warranty.

4. Entire Obligation
   This Limited Warranty states the entire obligation of Manufacturer with respects to the products. If any part of this Limited Warranty is determined to be void or illegal, the remainder shall remain in full force and effect.

5. ALL THE RAGES INC

6. 355 EISENHOWER PARKWAY SUITE 101

7. LIVINGSTON, NJ 07039 WWW.ALLTHERAGES.COM PRINTED IN CHINA

References

• Home | All The Rages

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>