QRO EVERSOUND Active Noise Cancellation Earbuds Instruction Manual

: June 11, 2024
: Qro

Table of Contents

Contents in the Box
Powering On and Off
- Powering On
- Powering Off Options
Wearing Your Earbuds
Pairing, Connecting to & Disconnecting from Devices
Music & Call Touch Controls
Listening Modes
Reset to Factory Settings
- The Earbuds Can Be Reset to Factory Configuration
Charging
- Charging the Earbuds
- Charging the Charging Case:
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QRO EVERSOUND Active Noise Cancellation Earbuds

Contents in the Box

Model Name : EVERSOUND

Earbuds (2)
Charging Case (1)
Ear Tips (6)
USB-C Charging Cable (1)
User Instructions (1)

Product Features

Active Noise Cancellation (ANC)
Transparency Mode
Entertainment Mode
Call Noise Cancellation (ENC)
Music Play Time (ANC Off): 5H
Music Play Time (ANC On): 4H
Charging Port: USB-C
Charging Time (Earbuds): 1-1.5H
Charging Time (Charging Case): 1-1.5H
Bluetooth Version: 5.1
Water Resistance: IPX4

Warning
Dispose of earbuds in accordance with country and local regulations.
Keep earbuds away from young children and animals.

Powering On and Off

Powering On

Earbuds will be powered on automatically when the charging case is opened.

Powering Off Options

Place the earbuds back into the charging case and close the lid.
The earbuds will automatically shut down if they are not connected to a device for more than 5 minutes. The blue LED light will blink once after the units are powered off.

Wearing Your Earbuds

Identify the left and right unit (master).
Try different wearing position until they fit your ears.

Pairing, Connecting to & Disconnecting from Devices

Pairing between the Two Earbuds: After the earbuds are powered on, the master earbud (the right ear unit) will blink blue briefly for 1 second signaling the two earbuds are paired.
Connecting to Your Device: Choose “QRO Ever sound” from the device list in your device’s Bluetooth settings.
Disconnecting from Your Device: The earbuds will be disconnected from your device when they stray away from their Bluetooth coverage (10 meters).
Reconnection: (a) The earbuds will reconnect to your device when they return to the coverage area within 5 minutes. (b) The earbuds will automatically reconnect to the last device they were connected to every time they are turned on within that device’s Bluetooth range.
Earbuds can only be connected to one device at a time. If you are experiencing Bluetooth pairing issues, make sure earbuds are not connected to another device.

Music & Call Touch Controls

A sound effect can be heard when touching the earbud touch-control panels

Tap…………Play/Pause
Taps ……….Previous Song/Take and Hang Up Calls
Taps ……….Voice Assistant ………………..(Siri, Bixby, etc.)
Press & Hold
1.5 Sec ……..Decrease Volume/ ………………..Reject Calls
Tap…………Play/Pause
Taps ……….Next Song/Take and Hang Up Calls
Taps ……….ANC/Transparency/ ………………..Normal/Entertainment
Press & Hold
1.5 Sec ……..Increase Volume/ ………………..Reject Calls

Listening Modes

Normal mode: Increases battery life by turning off other listening modes.
ANC mode: Blocks external noise
Transparency mode: Amplifies external noise to hear what is going on in your surrounding environment
Entertainment mode: Eliminates delay between visual content and corresponding audio (ANC automatically turns off)

Reset to Factory Settings

The Earbuds Can Be Reset to Factory Configuration

Place the earbuds back to the charging case. Close the lid.
Delete or “Forget” the earbuds from your device.
Open the charging case. The master unit (right ear) will flash blue.
Take the left or the right earbud out of the case.
Press the touch panel of the earbud 6 times.
The earbuds will be reset to their original factory configuration signaled by the red LED flashing twice.

If the LED doesn’t flash red after 6 taps repeat Step 1 through 5 to reset the earbuds.

Place the earbuds back to the charging case. Close the lid. Follow the procedures for pairing and connection to reconnect earbuds to your device.

Charging

Charging the Earbuds

Place the earbuds in the charging case. Close the case. The LED on the charging case is on for 1 minute.
Earbuds Low Power Warning: Warning sound will be heard and the blue LED will flash every 3 seconds when the voltage is lower than 3.4V.

Charging the Charging Case:

Use the included USB-C cable to charge your charging case.
Charging Case Power Level Indicator (The LED on the sides of the charging case):
0-25%: ……….. Red
26%-50%: …… Blue
51%-75%: …… Light Green
76% – 99%: ………. Purple
100%: ………………. LED off
Charging Case Low Power Warning: The red LED will flash 10 sec per minute.

Earbuds and Charging Case Maintenance: Charge the earbuds and charging case once every three months to maximize the life of both devices. Failing to do so may result in damaging of the device.