Controllers TP4-883 P-4 Wireless Controller User Manual
- June 4, 2024
- Controllers
Table of Contents
**Controllers**
TP4-883 P-4 Wireless Controller
User Manual
Overview:
The product is the Bluetooth controller suit for the P-4 console, with a wonderful appearance, applying MICRO USB Plug to pair code with P-4 console, after connected, it could operate under wireless. Supporting P-4 console different version, with dual vibration function.
Product function introduction:
As a picture, product each component with its function instruction:
- Direction button
- SHARE press button
- Pressing board
- Options button
- Button
- Button
- Button
- Button
- Right operation stick/R3 button. Pressing the operation stick can use the R3 function.
- PS button
- Left operation stick/L3 button. Pressing the operation stick can use the L3 function.
- L1 button
- L2 button
- USB port
- LED light
- R1 button
- R2 button
Handle instruction:
- Connect console power, switch on the console, and enter the normal standby interface.
- Insert the attached MICRO USB of the controller cable into the console, other side inserts the controller, pressing the controller HOME button to connect.
- Front light bar on of controller, press function button of controller begin gaming console operation, it means controller connecting successfully.
- During the normal gaming operation period, the controller will vibrate based on the rule of the game, controller applies for dual sides motor, left vibration feeling stronge4that the right side.
Specification parameter:
Input voltage: DC 5V
Working current (no vibration) : C60mA
Motor vibration current: < 120mA;
Paired-code current: 820MA
Attached controller cable length 2 meters.
Product weight: 187g
Product size: 15510055mm
Package size: 17011372mm
Product maintenance and mind:
- Please be careful to read the specification handbook while using it.
- Prohibited to dismantle/modify or try every behavior which disadvantages the product!
- Please use a wet cloth to clean the dust, and prohibit to use of chemical solvent to wipe!
- When product processing technology or version update, forgive me for not informing again!
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- -Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>