Danfoss E-MOPI-TI003-E Heavy Duty Series Piston Motors Speed Sensor Kit Installation Guide

June 11, 2024
Danfoss

Danfoss® Heavy Duty Series Piston Motors
109823-000
Speed Sensor
AN450457990355en-000101
E-MOPI-TI003-E
Supersedes 4-416
Installation Information

E-MOPI-TI003-E Heavy Duty Series Piston Motors Speed Sensor Kit

CAUTION
Exceeding the specified amount of torque may permanently damage this sensor. Read installation instructions before installing the sensor. This digital speed sensor is used to monitor the speed of an Danfoss Heavy Duty Series piston motor.

  1. Make sure the hydraulic power is turned off and the motor can not rotate before proceeding.
  2. Screw the digital speed sensor CW into the motor’s end cover until the end just touches the shaft.
  3. Unscrew the sensor CCW 60 ± 10′ to provide running clearance. Note: The angle between each of the flat wrenching surfaces on the nut is 6D These flats can be used to estimate the backoff distance of CCW rotation.
  4. Continue to unscrew the sensor CCW until the flats on the sensor are parallel with the motor shaft (see drawing below).
  5. Maintain the sensor position and tighten the seal nut to a torque of 13,6±1,4 Nm [120 ±12 lb-in].
  6. If sensor flats are not parallel with motor shaft; loosen seal nut, realign sensor and retorque to value specified in step 5.

Important Note: More torque than the specified amount may permanently damage the sensor.

Danfoss E MOPI TI003 E Heavy Duty Series Piston Motors Speed Sensor Kit
-

PACKARD ELECTRIC WEATHER PACK SERIES
12010717 CONNECTOR (BLACK WITH INDEX CODE 101)
(MATES WITH 12015793, CONNECTOR AND
12089188, SLEEVE TERMINAL FEMALE)
12015323 SEAL (3 SEALS)
12089040 PIN (3 PINS)

Danfoss E MOPI TI003 E Heavy Duty Series Piston Motors Speed Sensor Kit -
WEATHER PACK SERIES

Products we offer:

• Cartridge valves
• DCV directional control valves
• Electric converters
• Electric machines
• Electric motors
• Gear motors
• Gear pumps
• Hydraulic integrated circuits (HICs)
• Hydrostatic motors
• Hydrostatic pumps
• Orbital motors| • PLUS+1® controllers
• PLUS+1® displays
• PLUS+1® joysticks and pedals
• PLUS+1® operator interfaces
• PLUS+1® sensors
• PLUS+1® software
• PLUS+1® software services, support and training
• Position controls and sensors
• PVG proportional valves
• Steering components and systems
• Telematics
---|---

Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and electric components. We specialize in providing state-of-the-art technology and solutions that excel in the harsh operating conditions of the mobile off-highway market as well as the marine sector. Building on our extensive applications expertise, we work closely with you to ensure exceptional performance for a broad range of applications. We help you and other customers around the world speed up system development, reduce costs and bring vehicles and vessels to market faster.
Danfoss Power Solutions – your strongest partner in mobile hydraulics and mobile electrification.
Go towww.danfoss.com for further product information.
We over you expert worldwide support for ensuring the best possible solutions for outstanding performance. And with an extensive network of Global Service Partners, we also provide you with comprehensive global service for all of our components.

Local address:

Hydro-Gear
www.hydro-gear.com
Daikin-Sauer-Danfoss
www.daikin-sauer-danfoss.com

Danfoss
Power Solutions (US) Company
2800 East 13th Street
Ames, IA 50010, USA
Phone: +1 515 239 6000| Danfoss
Power Solutions GmbH & Co. OHG
Krokamp 35
D-24539 Neumünster, Germany
Phone: +49 4321 871 0
---|---
Danfoss
Power Solutions ApS
Nordborgvej 81
DK-6430 Nordborg, Denmark
Phone: +45 7488 2222| Danfoss
Power Solutions Trading (Shanghai) Co., Ltd.
Building #22, No. 1000 Jin Hai Rd
Jin Qiao, Pudong New District
Shanghai, China 201206
Phone: +86 21 2080 6201

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

Danfoss I April 2023

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals