FOCHEW HX160Q2 15W Wireless Portable Charger User Manual

FOCHEW HX160Q2 15W Wireless Portable Charger

Instructions for Use of a Portable Power Source

Before using the product, please read the following operating instructions.

Portable Charger Ports

Product Attributes

Safety:

In order to provide dependable assurance for your mobile phone and digital device, several protective designs make it possible to handle a number of abnormal scenarios, including overcharge, over-discharge, excessive temperature, and short circuits.

Efficiency:

Quick charging and discharging efficiency, support for quick charging and discharging, and intelligent multi-protocol output. Compatible with the most popular mobile phones and digital devices, supporting popular quick charging and discharging devices thanks to an incorporated clever USB charge controller.

Quality:

Selecting charge and discharge management chips that are customized will help you get the best lithium polymer batteries.

Product Description

I appreciate your choice. With a premium Li-polymer electric core and a specially designed charging and discharging electric chip, this product is a high-capacity portable power source that performs well in terms of safety, efficiency, compatibility, etc.

Specifications

• Connector Type: USB Type C, USB Type A, Micro USB
• Brand:  FOCHEW
• Battery Capacity: 30800 Milliamp Hours
• Capacity: 30,800mAh
• USB Input:  25W PD 3.0 5V/3A, Micro USB 5V/2.1A;
• USB Output: PD 3.0 5V/3A, Dual QC 4.0 5V/3A
• Wireless Output: 5W, 7.5W, 10W, 15W Max
• Power Output: 25W
• Size: 5.92.90.6 inch
• weight: 360g

Important Reminders

1. Before using the power bank for the first time, please fully charge it.
2. Take off your phone case if it is thicker than 5mm when using wireless charging.

Package Content

• 1 x FOCHEW 30,800mAh USB-C Power Bank (25W PD+QC 4.0)
• 1 x Micro USB Cable
• 1 x User Manual

Product Management

Switch for the power indicator

You can tap the switch to re-light the LED display in order to see the product’s current remaining power (if no other operations are made, the display will turn off again after around 30 seconds). To stop the present state of discharge while it is still happening, tap this switch twice continuously. To resume discharge, tap it once more.

Charging

Use a brand-specific power adaptor connector to charge the product. While charging, an LED display indicates the battery’s state of charge (Quick charge input: the symbol is shown). The IN symbol is visible in normal input.)

Discharging

This product has a smart charging and identification design. The charging function can be engaged when the digital product is intelligently and automatically recognized when connected via a USB power cord. During charging, an LED display shows the battery’s current charge (for quick charges and discharges, the symbol is on). The OUT symbol is on during a normal discharge.

Bluetooth charging

For wireless charging (which only requires pressing the power button), the device that needs to be charged should be laid flat on the wireless charging detection area and pointed at that part of the product. The symbols in the display will light up if charging is going well. If the indicator does not ordinarily illuminate, To bring the induction area to its regular operating state, the relevant position must be changed. The indicator will flash to show there is a metal foreign object in the sensing region.

Notice

• Before using this item for the first time, please completely charge it.To make sure the product is in good working order while in use, please brighten the digital product’s screen and check that the charging connection label is properly shown.
• Please choose an adaptive connection line on your own while charging this product or a digital product with this product.
• Charge a digital product as quickly as you can if this product’s performance is subpar when doing so.
• The digital product will use this product’s electric supply before this product during the connection between the two.
• Please remove the connecting wire as soon as the digital product is fully charged to prevent loss.
• The device can be recovered by charging activation via an external charger if it enters protection status owing to an output short circuit or other factors (LED has no display after pressing buttons).

Glimpse of Some Features

Phone Fast Charging at 25W

Your iPhone 14/14 Pro max/13/13 Pro max/12 Pro max/11, Galaxy S21/S20, Google Pixel 4/4 XL, and other USB-C compatible devices may be quickly charged with a 25W Power Delivery connector. Devices are charged up to five times faster with dual Quick Charger 4.0 Ports than with standard charging.

Compatible Phone Models

iPhone 14, iPhone 14 Pro Max, iPhone 13, iPhone13 Pro Max, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 11, Galaxy S21, Galaxy S20, Google Pixel 4, Google Pixel 4 XL

Fastest Recharge Ever

With a 25w PD Charger, recharge the power bank in less than three hours.

Smart LCD Digital Display and Compact Design

• Size of this power bank: 5.9×2.9×0.6 inches.
• No more speculating about whether to charge it or not because the LCD display reveals the current battery charge, input, and output status.

Warning

Since this product has a Li-ion electric core, it is prohibited to randomly disassemble the product shell in order to prevent harm to the electric core or other risks.
This product may not be deliberately disassembled, squeezed, punctured, or exposed to a short circuit, water, fire, or an environment with a temperature higher than 60°C (140°F).

FCC Declaration

Part 18 of the FCC Rules is adhered to by this gadget.

Two requirements must be met for operation: This item might not interfere in a negative way. Any interference that is received, even interference that might lead to undesirable operation, must be accepted by this device.

The user’s right to use the equipment could be revoked if changes or modifications are made without the express approval of the party in charge of compliance.

Note: In accordance with Part 18 of the FCC Rules, this equipment has been tested and determined to conform with the restrictions for a Class B digital device. These restrictions are made to offer a home installation a level of protection against unwanted interference that is appropriate.

Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

If not installed and utilized in accordance with the instructions, this equipment, which generates, utilizes, and can radiate radio frequency energy, may cause hazardous interference to radio communications. There is no assurance that interference won’t happen in a specific installation, though. The user is recommended to try to eliminate the interference by one or more of the following methods if this device does really produce harmful interference to radio or television reception, which can be determined by turning the equipment on and off.

The receiving antenna should be turned or moved:

• Increase the distance between the apparatus and the receiver.
• The equipment should be plugged into an outlet on a different circuit than the receiver.

FAQ’s

How long does it take to charge the FOCHEW HX160Q2 15W Wireless Portable Charger?****

It takes approximately 4-5 hours to fully charge the portable charger using a 5V/2A adapter.

How many devices can be charged at once with the FOCHEW HX160Q2 15W Wireless Portable Charger?****

You can charge one device wirelessly and one device through the USB port simultaneously.

Can the FOCHEW HX160Q2 15W Wireless Portable Charger charge my device while it is in a case?****

Yes, as long as the case is less than 5mm thick and does not have any metal or magnetic elements that may interfere with wireless charging.

Is the FOCHEW HX160Q2 15W Wireless Portable Charger safe to use?****

Yes, the charger has built-in protections against overcharging, overheating, and short-circuiting.

How do I know when my device is fully charged?****

The charger has a LED indicator that will turn off when your device is fully charged.

What is the battery capacity of the FOCHEW HX160Q2 15W Wireless Portable Charger?****

The battery capacity is 10000mAh.

Does the FOCHEW HX160Q2 15W Wireless Portable Charger come with a charging cable?****

Yes, the charger comes with a USB charging cable.

Can I use the FOCHEW HX160Q2 15W Wireless Portable Charger while it is charging?****

Yes, you can use the charger while it is charging another device.

What is the warranty on the FOCHEW HX160Q2 15W Wireless Portable Charger?****

The charger comes with a 12-month warranty from the date of purchase.

How long does it take to charge a 15W Wireless Portable Charger?

The charging time for a 15W Wireless Portable Charger varies based on the capacity of the battery and the charging speed of the adapter used. Typically, it takes around 3-4 hours to fully charge a 10000mAh battery.

How many devices can a 15W Wireless Portable Charger charge at once?

Most 15W Wireless Portable Chargers can charge one device wirelessly and one device through a USB port simultaneously.

Is it safe to leave my device on a 15W Wireless Portable Charger overnight?

Yes, it is safe to leave your device on a 15W Wireless Portable Charger overnight. These chargers have built-in safety features to prevent overcharging, overheating, and short-circuiting.

How can I tell if my device is charging on a 15W Wireless Portable Charger?

Most 15W Wireless Portable Chargers have LED indicators that light up when your device is charging. The indicator will typically turn off when your device is fully charged.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>