CHIFENCHY MAGIC ARM Phone Stand with Bluetooth Speaker User Guide
- June 11, 2024
- CHIFENCHY
Table of Contents
- WHAT’S lN THE BOX
- SPECIFICATIONS
- CONTROL BUTTONS
- TIME INSTRUCTION
- SCREEN CONTROLS
- INDICATOR LIGHT STATUS
- SPEAKER PAIRING
- SPEAKER PAIRING
- DISCONNECT AND RECONNTECT DEVICE
- CALLING MODE
- SAFETY PRECAUTIONS
- ONE YEAR WARRANTY
- Not covered Warranty
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CHIFENCHY MAGIC ARM Phone Stand with Bluetooth Speaker
WHAT’S lN THE BOX
Phone Stand with Speaker x l
Type-C Charging Cable x l
Quick Start Guide x l
SPECIFICATIONS
- Product Name ………. …………………………… Magic Arm
- Bluetooth Version.___ ………………. .V5.3
- Working Range …. …… ··················>701!
- SNR……….. . ……. >65d8
- Charging Input……………………………………… DC 5V/IA
- Battery capacity. … 3.7V 1500mAh
- Item size…___144.5拿89.5*55mm
- Item weight 372g
CONTROL BUTTONS
| Long press (2-3s)| Power on/off
---|---|---
| Long press(8-10s)| Factory data Reset
| Short press| Play/Pause Music
| Short press| Turn down volume.
| Long press| Previous track
| Short press| Turn up volume
| Long press| Next track
TIME INSTRUCTION
It enters to time mode and show time on LCD display when turn on the phone stand speaker
Time Adjustment:
Short press button · ·to adjust 12 hours by
short press button · · and “ “. After
adjusting hours, shor press button to enter
the minutes setting. After correcting the time,
short press button • • to complete the setup
Alarm Mode:
Long press button • . to enter alarm mode Setting the time of alarm is the
same as setting the time. Please refe「 to “Time Adjustment. (A small blinking
bell in the upper right corner indicates that the alarm is being set.)
Snooze Mode:
When the clock alarms, short press any button other「 than button · · to enter
snooze mode. The clock will alarm again after 5 minutes. (When the LCD display
shows the time and the alarm display flashes, the clock is in snooze mode)
Turn off the alarm:
Short press button . to turn off the day’s alarm clock
Cancel the alarm:
Double click button ” can cancel the alarm clock setting
NOTE
If you have set the alarm clock, it will still alarm at the set time even if the speaker is turned off.
If you want to use it as an alarm clock for a long time, we recommend that you always use the charger. Avoid shutting down due to low battery
SCREEN CONTROLS
Short press button ” ” to turn off the LCD screen Short press button “ ” again to turn on the LCD Screen
INDICATOR LIGHT STATUS
Bluetooth pairing indicator: When the speaker is turned on, a “BT” character is flashing status. That means the speaker is ready to pair Once pair, the BT will be solid white
TF cord mode: After insetting TF cord, the “TF” character will be solid white.
Battery charging While the speaker is charging, the indicator light will turn solid red. once speaker is fully charged, the red light will turn off. (This charging indicator is on the right of the charging port.)
SPEAKER PAIRING
NOTE:
During use, the charger connection will automatically stop charging when the
battery is full and switch to the charger supplying power directly to the
speaker and the battery will stop supplying power. The battery is only
activated to supply power again if the speaker draws too much current and
exceeds the supply current of the char
SPEAKER PAIRING
To pair the speaker
Make sure the smartphone, tablet, or computer you’re using with the speaker has Bluetooth
Turn on the speaker(press and hold the button· · for 2-3 seconds) until the display lights up
Find the Bluetooth name “Magic Arm” your device’s list then select to pair
NOTE:
Auto re-connection: The device and Bluetooth will find each other every time, so long as the speaker is set to Bluetooth and your device’s Bluetooth is on.
心w power shutdown: Automatic shutdown when the power; is lower than 3.3V.
DISCONNECT AND RECONNTECT DEVICE
Double click the button· · to disconnect the speaker from the device and enter into pairing mode. If you want to Disconnect the speaker and the device, just need to double click the button· · again.
CALLING MODE
Receiving
Short press button· · to receiving a call when call is coming
> End Call:
Short press button· ·again when need to end a call
> Reject Call
Long press button· · for 2 seconds when call is comin
SAFETY PRECAUTIONS
Please follow the instructions for all operations and use
Do not charge near a water source or in the rain to prevent electric shock.
Do not damage the cable. especially the connectors
Unplug the Type-C charging cable when it is not in use or during a thunderstorm.
Please keep the speaker away from heat sources (including all equipment that generates heat), such as stoves
> Do not expose the speaker to extreme
temperatures for a long time. Excessive heat or extreme cold temperatures may damage the battery.
Do not attempt to disassemble t
ONE YEAR WARRANTY
Our products are covered by a 12-month warranty. Starting tram the date of purchase
For quality-related issues, we will, at its sole option, either repair replace the defective product or part. We are not liable to the buyer for any operational loss or other indirect or consequential losses whatsoever.
Not covered Warranty
Damage from outside sources
Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, operating devices improperly, incorrect connections, incorrect battery use)
Damage caused by accident improper care, negligence, excessive wear and tear, or improper installation or assembly contrary to any written installation instruction.
Items that have expired their warranty period
Non quality-related issues (after 30 days of purchase)
Repairs through 3rd parties
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>