CHIFENCHY S207 Magic Arm Phone Stand With Bluetooth Speaker User Guide

CHIFENCHY S207 Magic Arm Phone Stand With Bluetooth Speaker User Guide

WHAT’S IN THE BOX

• Phone Stand with Speaker x 1
• Type-C Charging Cable x1
• Quick Start Guide x 1

SPECIFICATIONS

1.   Product Name…… Magic Arm
2. Bluetooth   Version….. ..V5.3
3. Working Range….. >70ft
4. SNR…….. >65dB
5. Charging Input…. …DC 5V/1A
6. Battery Capacity 3.7V 1500mAh
7. Item size….. 144.5 89.5*55mm
8. Item   weight….. 372g

CONTROL BUTTONS

| Long press (2-3s)| Power on/off
---|---|---
| Long press(8-10s)| Factory data reset
| Short press| Play/Pause Music
| Short press| I Turn down volume.
| Long press “Previous| track
| Short press| Turn up volume
| Long press| Next track

TIME INSTRUCTION

It enters to time mode and show time on LCD display when turn on the phone stand speaker.

Time Adjustment:
Short press button to adjust 12 hours by short press button and “After adjusting hours, short press button to enter the minutes setting. After correcting the time. short press button to complete the setup.

Alarm Mode:
Long press button to enter alarm mode. Setting the time of alarm is the same as setting the time. Please refer to Time Adjustment. (A small blinking bell in the upper right corner indicates that the alarm is being set.)

Snooze Mode:
When the clock alarms, short press any button other than button to enter snooze mode. The clock will alarm again after 5 minutes. (When the LCD display shows the time and the alarm display flashes, the clock is in snooze mode)

Turn off the alarm:
Short press button to turn off the day’s alarm clock

Cancel the alarm:
Double click button” can cancel the alarm

NOTE: >If you have set the alarm clock, it will still alarm at the set time even if the speaker is turned off. If you want to use it as an alarm clock for a long time, we recommend that you always use the charger. Avoid shutting down due to low battery.

SCREEN CONTROLS

Short press button? Short press button” screen
to turn off the LCD screen again to turn on the LCD

INDICATOR LIGHT STATUS

Bluetooth pairing indicator When the speaker is turned on a “B” character is flashing status That means the speaker is ready to pair. Once pair the “BT will be solid white

TF card mode: After insetting TF card, the TF character will be solid white:
Battery charging: While the speaker is charging the indicator light will turn solid red. Once speaker is fully charged, the red light will turn off. (This charging indicator is on the right of the charging port)

NOTE: During use, the charger connection will automatically stop harging when the bottery is full and switch to the charge supplying power directly to the spooker and the bomary will stop supplying power. The battery is only activoted to supply power again if the speaker dranks too much current and exceeds the supply current of the charger

SPEAKER PAIRING

To pair the speaker
Make sure the smartphone, tablet or computer youre using with the speaker has Bluetooth Turn on the specker (press and hold the button ( for 2-3 seconds) until the display lights up
Find the Bluetooth name Magic Arm in your device’s list, then select to pair

NOTE: Auto-connection The device and Bluetooth will find och other overy time so long on the speaker in bot to tooth ord your device’s Bluetooth is on.
Low power shutdown: Automatic shutdown when the power l lawan thon v

DISCONNECT AND RECONNTECT DEVICE

Double click the button to disconnect the speaker from the device and enter into pairing mode. If you want to reconnect the speaker and the device, just need to double click the button again.

CALLING MODE

• Receiving:
  Short press button call is coming to receiving a call when

• End Call:
  Short press button coll again when need to end a

• Reject Call:
  Long press button for 2 seconds when call is coming.

SAFETY PRECAUTIONS

Please follow the instructions for all operations and use

• Do not charge near a water source or in the rain to prevent electric shock
• Do not damage the cable.especially the connectors.
• Unplug the Type-C charging cable when it is not in use or during a thunderstorm
• Please keep the speaker away from heat sources (including all equipment that generates heat). such as stoves.
• Do not expose the speaker to extreme temperatures for a long time. Excessive heat or extreme cold temperatures may damage the battery
• Do not attempt to disassemble the speaker

ONE YEAR WARRANTY

• Our products are covered by a 12-month warranty,starting from the date of purchase.
• For quality-related issues, we will, at its sole option, either repair or replace the defective product or part: We are not liable to the buyer for ciny operational loss or other indirect or consequential losses whatsoever.

Not Covered Under Warranty

• Damage from outside sources
• Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water operating devices improperly, incorrect connections incorrect battery use).
• Damage caused by accident improper care negligence, excessive wear and tear or improper installation or assembly contrary to any written installation instruction
• Items that have expired their warranty period.
• Non quality-related issues (after 30 days of purchase)
• Repairs through 3rd parties.

Scan the code for more video tutorials

Documents / Resources

| CHIFENCHY S207 Magic Arm Phone Stand With Bluetooth Speaker [pdf] User Guide
B1I4YyNiRmL, S207, S207 Magic Arm Phone Stand With Bluetooth Speaker, Magic Arm Phone Stand With Bluetooth Speaker, Phone Stand With Bluetooth Speaker, Stand With Bluetooth Speaker, Bluetooth Speaker, Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>