DELUX M520DB Multi Mode Wireless Mouse User Manual
- June 11, 2024
- DELUX
Table of Contents
M520DB Multi Mode Wireless Mouse
User Manual
Thank you for choosing this wireless office mouse. Please read user manual carefully when using this product.
Contents:
- Wireless office mouse …………………………….. X 1
- User manual ……………………………………………. X 1
- USB nano receiver ………………………………….. X 1
- AA battery (Optional) ……………………………. X 1
- Removable textile cover (Optional) ………… X 1
Button Function:
- Left click
- Scroll wheel
- Right click
- DPI cycle
- Forward
- Backward
- Indicator light
- Mode switch
- ON/OFF switch
- AA battery
- USB nano receiver
Features
- Multi-mode connection: 2.4G+BT3.0+BT5.0
- Multiple colors available
- Removable textile cover
Installation
2.4G:
Equip the mouse with battery, switching to the 2.4G mode, and press the left
button, middle button and the right button at the same time for 3 seconds. The
blue indicator light will flash rapidly. Then insert the USB nano receiver
into the USB port and keep the mouse and nano receiver within 10cm. Then the
connection will be built automatically.
BT3.0/BT5.0 mode:
The indicator light flashes continuously with green color and enters into
Bluetooth coding mode when pressing the mode switch for more than 3 seconds in
BT mode. Then build up the connection and choose BT3.0 mode or BT5.0 mode
according to the bluetooth device interface.
If you want to switch device, you can press mode switch again and repeat above
actions, the current device will be disconnected automatically. The indicator
light will flash once, twice and three times respectively when shifting the
DPI.
Specification
| DPI | 1000/1600(default)/2400 |
|---|---|
| Polling rate | 250Hz |
| Working voltage | 1.5V |
| Working current | 515mA |
| Compatible system | Windows 8/10/mac OS |
Receiver Connection
Equipping the mouse with battery, insert the nano receiver to the USB port of
your computer, pushing the ON button on the bottom of the mouse, and the
receiver will detect the device automatically, plug and play.
Rebuilding up the Connection between Mouse and Receiver
If your mouse cannot work normally, you can try to build up the connection
again between mouse and receiver, as following steps:
- Take out the nano receiver from computer and insert again, it will detect automatically for about 15 seconds.
- Keep the mouse in ON mode and with battery in correct direction
- Keep the effective distance within 10CM between the mouse and receiver.
- Press the left button, middle button (scroll wheel) and right button at the same time for about 1-3 seconds, then release it. The connection is being built for about 10 seconds.
- If you cannot build up the connection in 10 seconds, please repeat the above steps.
Debugging Tips
- Check the receiver it is connected to the USB port.
- Check the ON/OFF button if in ON mode.
- Check the effective distance between mouse and the receiver, and shorten it.
- Rebuild up the connection between the mouse and receiver.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>