SAKI TeaSmart Electric Turkish Tea Maker User Guide
- June 11, 2024
- SAKI
Table of Contents
Tea Maker
Quick Start Guide
What’s In The Box
Control Panel
Please make sure to read SAKI User Manual prior to using your unit.
Using the Tea Maker
Before using the tea maker:
- Plug the tea maker base into an outlet.
- Fill the tea maker up to MAX line, place it on the tea maker base, and run a heating cycle by pressing START/STOP button.
- Once the boil cycle is complete, discard the water and repeat this process one more time.
Note: ONLY fill the tea maker body with water. DO NOT heat or boil other liquids.
-
Plug in the tea maker base. Fill the tea maker with the desired amount of water.
Put the teapot on top of tea maker body and set the tea maker body on to the tea maker base.
Note: To switch from Fahrenheit to Celcius, press and hold POWER ON/OFF and START/STOP buttons for 2 seconds.
Note: DO NOT start the heating cycle when the tea maker is empty. If the tea maker detects there is not enough water in it, the tea maker shuts off, and the temperature display will read “NO WATER.” Plug out from the outlet and let the tea maker cool for 10 minutes before refilling. -
Press START/STOP once to start the heating cycle. To indicate that the heating cycle has started, the red light ring will illimunate, and the temperature display will show current temperature as it rises. Once the tea maker reaches boiling temperature, the tea maker will beep and automatically activate keep warm. The red light ring will start a pulsing effect to indicate that the keep warm is activated.
Note: To mute the tea maker, press and hold the START/STOP button for 3 seconds. To indicate the tea maker is muted, icon will read on the temperature display
Powering On
To turn on the tea maker, plug the power cord into the socket. The control
panel will automatically turn on once plugged in.
Powering Off:
To manually power off, press and hold the POWER ON/OFF button for 3 seconds.
manually power off, press and hold the
Cleaning, Care & Storage
Cleaning
Unplug your tea maker and allow it to cool before cleaning. Wipe the tea maker
and power base with a soft damp cloth. Be sure that electric socket is kept
dry. Dry all parts after every use.
Warning: NEVER immerse the tea maker or tea maker base in water.
Descaling
The tea maker will not work properly if it is not descaled regularly. Regular
descaling can increase the life of the tea maker, allowing it to boil water
faster and with less energy.
Scale is a naturally occurring buildup of mineral deposits caused by
impurities in water, especially hard water. For best performance, descale the
tea maker every 4-8 weeks or whenever scale buildup is present inside.
Descaling can be completed with a descaling solutions specifically designed
for kettles. Follow the directions on the descaling solution package OR
- Fill the tea maker with equal parts water and white vinegar.
- Let sit for 30 minutes.
- Discard solution and rinse tea maker thoroughly with clean water.
- Repeat this process until all deposits are removed.
Storage
Unplug power cord from outlet and allow kettle to cool completely before
storing. Follow cleaning instructions and store in an upright position. Do not
store anything on top of your kettle. The kettle may be stored on base when
not in use.
For questions or to register your product, contact us at
1-844-331-7333 or visit us online at
saki.us