LOGIC ML8 4G MiFi Router User Manual

LOGIC ML8 4G MiFi Router User Manual

SIM card installation

Refer to the following picture put the SIM card into the card slot.

Main functions

SIM card LED
Do not insert the SIM card, power on to view, SIM card indicator red light is solid; Insert an invalid or valid SIM card, power on to view. SIM card LED blue light is on: Insert the SIM card that opens the PIN code, turn on the system to view, the SIM card indicator light flashes red, and the blue light is solid after unlocking.

Battery LED
When the charger is not plugged in, full or normal power (not full or low power) to view, the battery indicator blue light is on; Low battery view, battery indicator red light is solid. Full or normal power plugged into the charger to charge, battery indicator blue light is solid on; Low battery plug into the charger to charge, battery indicator blue light often blinking.

WIFI LED
The device is turned on, the WIFI function is automatically turned on, and the WIFI indicator light is always on; Log in to the web page 1921681.1 (Login: admin Password: admin). WIFI APK select off. WIFI indicator red light is solid.

Network
Insert the SIM card. the rest of the devices can be connected to the device WIFI, after entering the correct password, you can access the Internet normally, up to 8 units can be connected.

Power key
Long press the power button under shutdown, observe, the device turns on normally, and the lights are lit in turn; Long press the power outton unccr boot, observe, the cevice shuts cown normally, the lights go out; Short press the cower button uncer shutcown, observe, the cevice coes not respond; Power on for a oerioc of time, anc when the light is off, press the power button shortly, ooserve, the indicator light of the device is normally lit.

Reset key
Long press the °aeration reset key (2s or more) uncer boot, the cevice is restored to the factory and powered on, and the basic information is viewed cs the default value

Accessories

Use only batteries, chargers, and accessories approved by the manufacturer with this device. Use of any other types will invalidate the warranty and may be dangerous. Check with your dealer for available accessories. You may opt to buy:

• Charger Plug, charger cable
• Charger plug used to connect with the charger cable for charging on wall outlets. Also, you can use the charger cable to connect with the other devices such as the personal computers to charge the phone.
• Charging time is about 3 to 4 hours. The charging condition is displayed on screen. You may use your phone while charging. 

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

FCC Regulations

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 055ML3722

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Body-worn Operation
This device was tested for typical body-worn operations. To comply With RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar including the antenna. Third- party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.

SAR

This wireless phone meets the government’s requirements for exposure to radio waves. The guidelincs arc based on standarcs that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types LOGIC ML8 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 1.369kg. This device was tested for typical body-worn operations with the back of the handset kept lcm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a lcm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

Technical Specifications

Weight: 91g (with battery)
Size: 97.7x 65 x14.05mm
Battery: 4.35 Li-on For the network: 3G 1/2
/5/8+ 4G 1/2/3/4/5/7/8/12/17/28AB
Battery refer to the following table:

Battery Manufacturer: Hangtian
Battery model: 178264961, 2500mAh

Notice:
The actual condition for mobile phones using has the relation to the network of the local environmental conditions, SIM card and the way using.

Warning:
For the consequences result by violating the following recommendations or using mobile phones in accurately, the manufacturers has no responsibility.

Explain:
If relate to the upgrades, without notice. The Company has the right for the final interpretation of this statement.

Know Your MiFi

Foreword

Honorific device user, thank you for choosing our mobile phone!
Our MiFi are according with the communication industry standards of PRC, and also according with the standards of European, and are approved for GSM networks.
Your device may be used internationally with various networks depending on your roaming arrangements with your service provider.
To use this device, you must subscribe to a GSM service from a provider. We have included many features in this device, but their function depends on the features available with your subscribed wireless network. Please contact your service provider for more information.
We strongly recommend you carefully read and understand this manual before using your phone in order to keep it under best conditions for your effective usage and utmost satisfaction.

Safety

• Never attempt to disassemble your device. You alone are responsible for how you use your device and any consequences of its use.
• As a general rule, always switch off your device wherever the use of a device is prohibited.
• Use of your device is subject to safety measures designed to protect users and their environment.
• Do not use your device in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.
• Do not expose your device to extreme temperatures lower than – 10°C and higher than + 55°C.
• Please note that the ambient temperature range for normal charging of mobile device is 0 °C – 45 °C. Do not charge at an ambient temperature below 0 ” C or above 45 ° C. as this will result in reduced battery performance and reduced life. Charging for too long
• at too high or too low ambient temperatures can damage unfilled or swelled batteries, and there is a risk of battery explosion
• The physicochemical processes created by chargers impose temperature limits when charging the battery. Your device automatically protects the batteries in extreme temperatures.
• Do not leave your device within the reach of small children (certain removable parts may be accidentally ingested). Electrical safety
• Only use the chargers listed in the manufacturer% catalogue. Using any other charger may be dangerous; it would also invalidate your warranty. Line voltage must be exactly the one indicated on the charger’s serial plate.

Aircraft safety

When traveling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs. Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network. Its use is illegal, and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these regulations.

Explosive materials
Please comply with warning signs at petrol station when personnel asking you to switch your phone off. You will need to comply with radio equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations are under way.

Electronic equipment
To avoid the risk of demagnetization, do not let electronic devices close to your phone for a long time.

Electronic medical equipment
Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids, pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 5mm be maintained between the phone and an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this area.

Hospitals
Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff.

Road safety
Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call. You must comply with any current legislation.

Distance of operation
This device model has been tested and meets radiofrequency exposure guidelines when used

As follows:

• Against the ear: place or receive a phone call and hold the phone as you would a wire line telephone.
• Body wom when transmitting, place the phone in a carry accessory that contains no metal and positions the phone a minimum of 5mm form your body. Use of other accessories may not ensure compliance with radiofrequency exposure guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a minimum of 5mm from your body,
• Data operation: when using a data feature, position the phone a minimum of 5mm from your body for the whole duration of the data transmission.

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>