PHILIPS Expertclean 7500 Sonic Electric Toothbrush Owner’s Manual

PHILIPS Expertclean 7500 Sonic Electric Toothbrush

Product Information

The Philips Sonicare toothbrush is designed to provide superior plaque removal, healthier gums, and whiter teeth through the use of gentle sonic technology and clinically developed features. The product comes with a charger and UV sanitizer. The UV sanitizer must be kept away from water and out of reach of children. The sanitizer should not be touched when the UV light bulb is hot, and it must be operated only with the protective screen in place. The appliance is designed for cleaning teeth, gums, and tongue and should not be used for any other purpose. The brush head must be replaced every 3 months or sooner if signs of wear appear.

Introduction
Welcome to the Philips Sonicare family! This toothbrush enables you to obtain superior plaque removal, whiter teeth and healthier gums. Using Sonicare’s combination of gentle sonic technology and clinically developed and proven features, you can be confident that you’re getting the very best clean, every time. Further support and product registration are available to you at: www.philips.com/support.

Product Usage Instructions

Before using the Philips Sonicare toothbrush, read the safety information carefully and save it for future reference. Only use the product for its intended purpose. Do not clean any part of the product in the dishwasher. Avoid direct contact with products that contain essential oils or coconut oil as it may result in dislodging of bristles. If you experience excessive bleeding, discomfort, or pain after using the appliance, stop using it and consult your dentist or doctor. If you have had oral or gum surgery in the previous 2 months, consult your dentist before using the appliance. If you have a pacemaker or other implanted device, contact your doctor or the manufacturer of the implanted device prior to use.

The battery safety instructions must be followed while using the product. The product contains batteries that are only to be removed by skilled persons. Only use original Philips accessories and consumables, and do not place the product or batteries in microwave ovens or on induction cookers. If any abnormality is observed while using or charging the product, stop using it and contact Philips immediately.

Important safety information

Only use the product for its intended purpose. Read this important information carefully before you use the product and its batteries and accessories, and save it for future reference. Misuse can lead to hazards or serious injuries.

Warnings

• Keep the chargers and UV sanitizer away from water.

• After cleaning, make sure the charger and/or sanitizer is completely dry before you connect it to the wall socket.

• This appliance can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision.

• Children shall not play with the appliance.

• Only use original Philips accessories or consumables. Only use the charger provided with the product. If supplied, only use the original USB cable and USB power supply unit.

• This appliance contains no user-serviceable parts. If the appliance is damaged, stop using it and contact the Consumer Care Center in your country. Devices with cord only: If the cord is damaged, replace the charger with sanitizer with a new one.

• Do not use the charger and/or sanitizer outdoors or near heated surfaces.

• Do not clean any part of the product in the dishwasher.

• This appliance has only been designed for cleaning teeth, gums and tongue.

• Keep the sanitizer out of the reach of children at all times.

• Stop using the sanitizer if the UV light bulb remains on when the door is open. UV light can be harmful to the human eye and skin.

• Only operate the sanitizer with the protective screen in place.

• Do not touch the UV sanitizer’s UV light bulb when it is hot.

• Stop using a brush head with crushed or bent bristles. Replace the brush head every 3 months or sooner if signs of wear appear.

• Avoid direct contact with products that contain essential oils or coconut oil. Contact may result in bristles dislodging.

• Stop using the appliance and consult your
  dentist/doctor if excessive bleeding occurs after use, if bleeding continues to occur after 1 week of use or if you experience discomfort or pain.

• If you have had oral or gum surgery in the previous 2 months, consult your dentist before you use this appliance.

• If you have a pacemaker or other implanted device, contact your doctor or the manufacturer of the implanted device prior to use.

• If you have medical concerns, consult your doctor before you use this appliance.

• This appliance is a personal care device and is not intended for use on multiple patients in a dental practice or institution.

Battery safety instructions

• This appliance contains batteries that are only to be removed by skilled persons
• Only use the product for its intended purpose. Read this information carefully before you use the product and its batteries and accessories, and save it for future reference. Misuse can lead to hazards or serious injuries. Accessories supplied may vary for different products.
• Only use original Philips accessories and consumables. Only use detachable supply unit TCBxxxx, HX6100, HX6110, HX6160 or WAAxxxx.
• Keep product and batteries away from fire and do not expose them to direct sunlight or high temperatures.
• If the product becomes abnormally hot or smelly, changes color or if charging takes longer than usual, stop using and charging the product and contact Philips.
• Do not place products and their batteries in microwave ovens or on induction cookers.
• Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from heating up or releasing toxic or hazardous substances. Do not short-circuit, overcharge or reverse charge batteries.
• This appliance contains batteries that are non-replaceable. When the battery is at end of life, the appliance shall be properly disposed of, see section on recycling.
• If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse well with water and seek medical care.
• When you handle batteries, make sure that your hands, the product and the batteries are dry.
• To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into contact with metal object (e.g. coins, hairpins, rings). Do not wrap batteries in aluminium foil. Tape battery terminals or put batteries in a plastic bag before you discard them.
• Charge and use the product at a temperature between 0 °C and 40 °C (32°F and 104 °F).

Storage and transportation conditions

• Temperature -10°C to 60°C (14 °F to 140 °F).

Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Radio Equipment Directive
Hereby, Philips declares that electric toothbrushes with radio equipment type (Bluetooth, NFC) are in compliance with Directive 2014/53/EU.

• The Bluetooth radio frequency interface in applicable products operates at 2.4 GHz.
• The maximum output power by the Bluetooth appliance is 3 dBm.
• The NFC radio frequency interface in applicable products operates at 13.56 MHz.
• The maximum RF power transmitted by the appliance is 30.16 dBm.

The full text of the EU Declaration of Conformity is available at the following internet address: www.philips.com/support.
Note: The Features of different models may vary. Some models may not be equipped with Bluetooth or NFC.
The following symbols may appear on the product: Read Operator’s Manual.

Detachable Power Supply Part: The “xxxxxx” indicates the model number of the approved chargers to be used. (TCBxxxx, HX6100, HX6110, HX6160 or WAAxxxx)

Intended use
Sonicare ExpertClean power toothbrushes are intended to remove adherent plaque and food debris from the teeth to reduce tooth decay and improve and maintain oral health. Sonicare ExpertClean power toothbrushes are intended for personal use. Use by children should be with adult supervision.

Your Philips Sonicare

1. Handle

2. Power on/off button

3. Intensity indicator

4. Mode/intensity button

5. Mode indicator

6. Brush Head Replacement Reminder 7 Battery indicator
   Accessories:

7. Brush head cap

8. Smart brush head(s)

9. BrushSync symbol

10. Charging stand

11. Travel case

12. Charging travel case

13. USB-A wall adapter

14. USB-A cable

15. UV sanitizer and charger

Note: Accessories included may vary based on the model purchased.

Sonicare app – Getting started

The Sonicare app pairs with your toothbrush to provide you a connected experience. By connecting your toothbrush to your Sonicare app account, you will be able to:

• Track your brushing progress
• Receive personalized tips and actionable recommendations to improve your oral health
•  Access the full range of benefits and receive ongoing upgrades

The app is compatible with a wide range of mobile devices.
To start using the Sonicare app:

1. Download the Sonicare app to your phone.
2. Ensure that Bluetooth for your device is turned on. 3 Pick up your toothbrush to ensure it is active (lights on)
3. Open the app and follow the steps.
4. Pair your toothbrush with the app.
5. Create your account via the app. Complete firmware update, if prompted, to access the latest improvements and features.
6. Brush regularly with your toothbrush connected to the app. When you regularly sync the toothbrush with the app, you will receive updates to help improve your oral healthcare.
7. Sync regularly.
8. Keep your phone close to your toothbrush for optimal data transfer.

To sync manually: Pair/connect your toothbrush with the app every two weeks to benefit from the app features/capabilities.
To sync automatically: Allow location permission while setting up the app. By allowing location permission, your phone knows when it is in the connection range of your toothbrush and can refresh your brushing data in the app to provide the latest insights and recommendations.

Note: Make sure your phone’s Bluetooth is switched on when using the app so that your toothbrush can transfer and update your brushing data in the app. If you have questions about why your brushing data is collected, be sure to review the Sonicare Privacy Statement, available throughout the app setup process.

App features
Your Sonicare power toothbrush is equipped with smart sensors to provide you with feedback about your brushing habits, including:

• Daily brushing sessions
• Time spent during each brushing session
• Applied brushing pressure
• Personalized tips and actionable recommendations
• Brush head replacement reminder (based on actual use)

The Sonicare app collects the data provided by the smart sensors and tracks your brushing habits over time.

Getting started

Attaching the brush head

1. Align the brush head so the bristles point in the same direction as the front of the handle.
2. Firmly press the brush head down onto the metal shaft until it will not go any further.

Note: It is normal to see a slight gap between the brush head and the handle.

Using your Philips Sonicare toothbrush

If you are using your Sonicare toothbrush for the first time, it is normal to feel more vibration than when using a non-electric toothbrush. It is common for first-time users to apply too much pressure. Only apply gentle pressure and let the toothbrush do the brushing for you. Please follow the brushing instructions below for the best experience.
To help you transition to your new Sonicare power toothbrush, use a lower setting for the first 1-2 weeks then transition to a higher setting.

Brushing instructions

1. Wet the bristles and apply a small amount of toothpaste.

2. Place the toothbrush bristles against the teeth at a slight angle (45 degrees). Pressing firmly to make the bristles reach the gumline or slightly beneath the gumline.
   Note: Keep the center of the brush in contact with the teeth at all times.

3. Press the power on/off button to switch on the Philips Sonicare.

4. Gently keep the bristles placed on the teeth and in the gumline. Brush your teeth with small back and forth motion so the bristles reach between the teeth. Continue this motion throughout your brushing cycle.
   Note: The bristles should slightly flare. It is not recommended to scrub as you would with a manual toothbrush.
   Note: If you apply too much pressure, you will be alerted by a change in vibration of the handle and the brush head replacement reminder flashing amber.

5. To clean the inside surfaces of the front teeth, tilt the brush handle semi-upright and make several vertical overlapping brushing strokes on each tooth.

6. After you have completed the brushing cycle, you can spend additional time brushing the chewing surfaces of your teeth and areas where staining occurs. You can also brush your tongue, with the toothbrush switched on or off, as you prefer.
   Note: Your Philips Sonicare toothbrush is safe to use on braces (brush heads wear out sooner when used on braces) and dental restorations (fillings, crowns, veneers) if they are properly adhered and not compromised.

BrushPacer
To make sure you brush evenly throughout the mouth, divide your mouth into 6 sections using the BrushPacer feature. The BrushPacer divides the brushing time into 6 equal segments and indicates when you should move to the next area. The segments are indicated with a brief pause in vibration. The toothbrush automatically stops at the end of the brushing session.
Note: Additional time may be added when you use the White+ or Gum Health modes.

Modes
Your power toothbrush is equipped with up to 4 different modes: Clean, Deep Clean+, Gum Health and White+ (specific models only). Based on the smart brush head you use, the optimal mode and intensity will be selected automatically by the BrushSync technology. To manually change the mode, press the mode/intensity button when the toothbrush is off. All brush heads work with each mode.

Note: When brushing with the Philips Sonicare app in ‘Deep Clean+’ mode, the brushing time will be 2 minutes when connected to the app and 3 minutes when not connected to the app.

Intensities
Your power toothbrush comes with 3 different intensity settings:

• low intensity (one bar)
• medium intensity (two bars)
• high intensity (three bars)

When attached to the handle, the smart brush head will automatically select the recommended intensity/ If you wish to change to a different intensity, you can do so by pressing the mode/intensity button while brushing. The intensity cannot be changed as long as the handle is powered off or paused.

BrushSync technology
BrushSync technology enables your brush head to communicate with your handle using a microchip. The symbol at the bottom of the brush head indicates that the brush head is equipped with this technology. BrushSync technology enables:

• Brush head replacement reminder
• BrushSync mode pairing

Philips Sonicare offers a wide range of smart brush heads, equipped with BrushSync technology. To explore our full range of toothbrush brush heads, and find the brush head that is best for you, go to www.philips.com/toothbrush- heads for more information.

Features

• Pressure Sensor Feedback
• BrushPacer
• SmarTimer
• EasyStart
• Brush Head Replacement Reminder
• Brush Head Mode Pairing

Pressure Sensor Feedback
Your Sonicare toothbrush measures the pressure you apply while brushing, to protect your gums and teeth from damage. If you apply excess pressure, the handle changes its vibration and the brush head replacement reminder light on the handle flashes amber until you reduce the pressure.
Note: Your product comes with the Pressure Sensor activated. To deactivate this feature (see ‘Activating or deactivating features’).

BrushPacer
The BrushPacer is an interval timer that helps you to brush evenly through the mouth by dividing your mouth into 6 sections.

SmarTimer
The SmarTimer indicates that your brushing cycle is complete by automatically switching off the toothbrush at the end of the brushing cycle. Dental professionals recommend brushing no less than 2 minutes twice a day.
Note: If you press the power on/off button after you started the brushing cycle, the toothbrush pauses. After a pause of 30 seconds, the SmarTimer resets.

EasyStart
This Philips Sonicare model comes with the EasyStart feature deactivated. The EasyStart feature gently increases the power over the first 14 brushings to help you get used to brushing with the Philips Sonicare. The EasyStart feature works with all modes.

Disclaimer
When the Philips Sonicare toothbrush is used in clinical studies, it must be used at high intensity with the handle fully charged and the EasyStart feature deactivated. To activate EasyStart (see ‘Activating or deactivating features’).

Brush Head Replacement Reminder
Your Philips Sonicare is equipped with BrushSync technology that tracks the wear of your brush head.
Note: This feature only works with Philips Sonicare smart brush heads with BrushSync technology.

1. When you attach a new smart brush head for the first time, the handle recognizes that you have a Philips brush head with BrushSync technology and begins tracking brush head wear.
2. Over time, based on the pressure you apply and the total time the brush head has been used, the handle tracks brush head wear in order to determine the optimal time to replace your brush head. This feature guarantees the best cleaning and care of your teeth.
3. When the Brush Head Replacement Reminder indicator lights up amber, you should replace your brush head.

Note: All smart brush heads come with the brush head replacement reminder feature activated. To deactivate the brush head replacement reminder see ‘Activating or deactivating features’.

Brush head mode pairing
Brush heads with BrushSync technology are equipped with a microchip which communicates with the handle and automatically pairs it with the recommended mode and intensity. Most brush heads with BrushSync technology will auto pair to Clean Mode. Brush heads with specific benefits will pair with the corresponding mode (when available), examples include:

• G3 Premium Gum Care: Gum Health Mode
• W3 Premium White or W(c) DiamondClean(compact): White+ Mode

Note: If you choose to change mode/intensity from the recommended setting, the brush head will remember the your chosen setting for future brushing sessions.

Activating or deactivating features

You can activate or deactivate the following features of your toothbrush:

• EasyStart
• Brush Head replacement reminder
• Pressure Sensor Feedback

Note: You can only activate or deactivate the brush head replacement reminder when a smart brush head is on the handle.

From handle:

1. Step 1: Place the handle on a plugged in charger/charging travel case.
2. Step 2: Press and hold power on/off button for:
3. Step 3: Let go of the power on/off button when you hear:

Together with:

• If you see the left LED for the battery indicator flash green 2 times and hear 3 tones low to high, then the feature has been activated.
• If you see the left LED for the battery indicator flash amber 1 time and hear 3 tones high to low, then the feature has been deactivated.

UV sanitizer

Note: Accessories included may vary based on the model purchased.

With the UV sanitizer you can clean your brush head after every use. Unplug the sanitizer, discontinue use and call Consumer Care if:

• The UV light bulb remains on when the door is open.
• The window is broken or missing from the sanitizer.
• The sanitizer gives off smoke or a burning smell while it is operating.

Note: UV light can be harmful to the human eye and skin. This device should be kept out of reach of children at all times.

1. After brushing, rinse the brush head and shake off excess water.
   Warning: Make sure that the brush head cap is not on the brush head when the brush head is being cleaned in the sanitizer.

2. Place your finger in the door recess on top of the sanitizer and pull open the door.

3. Place the brush head on one of the 2 pegs in the sanitizer with the bristles facing the light bulb.
   Note: Only clean Philips Sonicare snap-on brush heads in the sanitizer.
   Note: Do not clean Philips Sonicare for Kids brush heads in the sanitizer.

4. Make sure the sanitizer is plugged into a live outlet of appropriate voltage.

5. Close the door and press the green power on/off button once to select the UV clean cycle.
   Note: you can only switch on the sanitizer if the door is properly closed.
   Note: the sanitizer stops operating if you open the door during the sanitizer cycle.
   Note: The sanitizer cycle takes approximately 10 minutes and then switches off automatically.

The sanitizer is in operation when the light glows through the window.

Charging and battery status

This Philips Sonicare toothbrush is designed to provide at least 28 brushing sessions, each session lasting 2 minutes (14 days if used twice per day) on a fully charged battery. The battery indicator shows the battery status when you complete the 2-minute brushing session, when you pause the toothbrush, or while it is charging.
Note: It can take up to 24 hours to fully charge the battery before first use, but you can use the Philips Sonicare toothbrush before it is fully charged.

Charging
Charging on charger or UV Sanitizer

1. Plug the charger or sanitizer into an electrical outlet.
2. Place the handle on the charger or sanitizer.
   • The handle emits 2 short beeps to confirm that the handle is placed properly.
   • The flashing light of the battery indicator shows that the toothbrush is charging.
   • When the handle is fully charged on the charger, the battery indicator lights up green for 30 seconds and then switches off.

Charging with the travel case
Note: Accessories included may vary based on the model purchased.

1. Insert the USB cable to the charging travel case.
2. Connect the attached USB cable to the 5V DC input power either from:
   • The USB adapter provided.
   • A UL-listed or certified to ANSI/UL 60950-1 personal computer’s standard USB connector.
   • A UL-listed or certified to ANSI/UL 60950-1 LPS power supply with USB output port.
   • A UL-listed or certified 1310 Class 2 power supply.
3. Place the handle in the charging travel case.
   • The handle emits 2 short beeps to confirm that the handle is placed properly.
   • The flashing light of the battery indicator shows that the toothbrush is charging.
4. The travel case will charge your toothbrush until your toothbrush is fully charged.
   • When the handle is fully charged, the battery indicator lights up green for 30 seconds and then switches off.

Note: Charging the handle with the charging travel case may take longer than on the charger.

Battery status
Battery status (handle on plugged-in charger/charging travel case) When the handle is placed on the charger or in the charging travel case, the battery indicator shows the battery level.

Note: To save energy, the battery indicator will switch off when not in use.
Note: When the battery is completely empty, the toothbrush switches off. Place the toothbrush on the charger to charge it.
Note: To keep the battery fully charged at all times, you may keep your toothbrush on the charger when not in use.

Cleaning

Toothbrush handle

1. Remove the brush head and rinse the metal shaft area with warm water. Make sure you remove any residual toothpaste.
   Caution: Do not push on the rubber seal on the metal shaft with sharp objects, as this may cause damage.

2. Wipe the entire surface of the handle with a damp cloth.
   Note: Do not tap the handle on the sink to remove excess water.

Brush head

1. Rinse the brush head and bristles after each use.
2. Remove the brush head from the handle and rinse the brush head connection with warm water at least once a week. Rinse the travel cap as often as needed.

Charger

1. Unplug the charger before you clean it.
2. Wipe the surface of the charger with a damp cloth.

Travel case
Rinse with warm water and use a damp cloth to clean inside of travel case.

Charging travel case

1. Unplug the charging travel case before cleaning.
2. Use damp cloth to wipe the surface of the travel case.

UV Sanitizer
Warning: Do not immerse the sanitizer in water or rinse it under the faucet.
Warning: Do not clean the sanitizer when the UV light bulb is hot.
For optimal effectiveness, it is recommended to clean your sanitizer weekly.

1. Unplug the sanitizer.
2. Pull the drip tray straight out. Rinse the drip tray and wipe it clean with a damp cloth.
3. Clean all interior surfaces with a damp cloth.
4. Remove the protective screen in front of the UV light bulb. To remove the screen, grasp the edges next to the snaps, gently squeeze and pull out the protective screen.
5. Remove the UV light bulb. To remove the light bulb, grasp it and pull it out of the metal clasp.
6. Clean the protective screen and the UV light bulb with a damp cloth.
7. Reinsert the UV light bulb. To reinsert the light bulb, align the bottom of the light bulb with the metal clasp and push the bulb into the clasp.
8. Reinsert the protective screen. To reinsert the screen, align the pegs on the screen with the slots on the reflective surface near the UV light bulb. Push the screen straight into the slots on the sanitizer.
9. Place the drip tray back in the UV sanitizer.
10. After cleaning, make sure the sanitizer is completely dry before you connect it to the mains.

Storage

If you are not going to use the product for an extended period of time, unplug it from the electrical outlet, clean it and store it in a cool and dry place away from direct sunlight.

Replacement
Replace Philips Sonicare brush heads every 3 months to achieve optimal results. Use only Philips Sonicare replacement brush heads.

Locating the model number
Look on the bottom of the Philips Sonicare toothbrush handle for the model number (HX9600)

Warranty and support

If you need information or support, please visit www.philips.com/support or read the international warranty leaflet.

Warranty exclusions
What is not covered under warranty:

• In mouth attachments including brush heads and nozzles.
• Damage caused by use of unauthorized replacement parts or unauthorized brush heads.
• Damage caused by misuse, abuse, neglect, alterations or unauthorized repair.
• Normal wear and tear, including chips, scratches, abrasions, discoloration or fading.
• UV light bulb.

Recycling

• This symbol means that electrical products and batteries shall not be disposed of with normal household waste.
• Follow your country’s rules for the separate collection of electrical products and batteries.
• The UV light bulb of the sanitizer contains mercury. Do not throw the UV light bulb away with the normal household waste at the end of its life. Hand it in at an official collection point for recycling.

Removing the rechargeable battery

The built-in rechargeable battery must only be removed by a qualified professional when the appliance is discarded. Before removing the battery, make sure that the battery is completely empty.

Take any necessary safety precautions when you handle tools to open the appliance and when you dispose of the rechargeable battery. Be sure to protect your eyes, hands, fingers, and the surface on which you work.

When you handle batteries, make sure that your hands, the product and the batteries are dry. To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into contact with metal objects (e.g. coins, hairpins, rings). Do not wrap batteries in aluminum foil. Tape battery terminals or put batteries in a plastic bag before you discard them.

To remove the rechargeable battery, you need a towel or cloth, a hammer and a flat-head (standard) screwdriver. Observe basic safety precautions when you follow the procedure outlined below.

1. To deplete the rechargeable battery of any charge, remove the handle from the charger, turn on the toothbrush and let it run until it stops. Repeat this step until you can no longer turn on the toothbrush.

2. Remove and discard the brush head. Cover the entire handle with a towel or cloth.

3. Hold the top of the handle with one hand and strike the handle housing 0.5 inch above the bottom end. Strike firmly with a hammer on all 4 sides to eject the end cap.
   Note: You may have to hit on the end several times to break the internal snap connections.

4. Remove the end cap from the toothbrush handle. If the end cap does not release easily from the housing, repeat step 3 until the end cap is released.

5. Holding the handle upside down, press the shaft down on a hard surface. If the internal components do not easily release from the housing, repeat step 3 until the internal components are released.

6. Wedge the screwdriver between the battery and the black frame at the bottom of the internal components. Then pry the screwdriver away from the battery to break the bottom of the black frame.

7. Insert the screwdriver between the bottom of the battery and the black frame to break the metal tab connecting the battery to the green printed circuit board. This will release the bottom end of the battery from the frame.

8. Grab the battery and pull it away from the internal components to break the second metal battery tab.
   Caution: Be aware of the sharp edges of the battery tabs so as to avoid injury to your fingers.

9. Cover the battery contacts with tape to prevent any electrical short from residual battery charge. The rechargeable battery can now be recycled and the rest of the product discarded appropriately.

Note: Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

www.philips.com/Sonicare
©2022 Koninklijke Philips N.V. (KPNV). All rights reserved. Philips and the Philips shield are trademarks of KPNV. Sonicare and the Sonicare logo are trademarks of Philips Oral Healthcare, LLC and/or KPNV. 300007790502 (02/12/2022)

References

• Sonicare Electric Toothbrushes & Smart Toothbrushes | Philips Sonicare
• Philips Customer Service Support - Home | Philips
• Electric Toothbrush Heads & Replacement Heads | Philips Sonicare
• Accueil Assistance | Philips
• Domača stran za podporo | Philips

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>