HIIXHC B0CSSLK1JF G-Wolf GPS Wireless Dog Fence and Outdoor Pet Barrier 2 in 1 User Guide

HIIXHC B0CSSLK1JF G-Wolf GPS Wireless Dog Fence and Outdoor Pet Barrier 2

in 1

Specifications

• Product Name: GPS Pet Fence/Barrier System
• Features: Wireless, GPS-enabled, Training Collar
• Range: Up to 16 feet radius for barrier function
• Training Modes: Wireless Fence and Barrier
• Signal Acquisition: Satellite Signal required for operation

FAQ

• Q: How long does it take to acquire satellite signals?
  • A: Acquiring satellite signals may take a few minutes, ensure you are in an open area for better reception.
• Q: Can I use the GPS Wireless collar with a traction rope?
  • A: No, it is recommended not to attach any traction rope directly to the GPS Wireless collar.

Please read the training guide carefully and follow the instruction to train your pet, be noted this device is wireless fence and barrier based on GPS positioning technology, so only used outdoor in an open area.

PRECAUTIONS

1. Make sure your pet is in a relaxed state before training, this device is not suitable for aggressive and nervous pets.
2. Always keep your pet under control with a collar and leash during training!
3. The duration of each training session is half an hour, and don’t forget to remove the equipment after the training session.

OPERATION STEPS

Step 1: Prepare the Dog Fence Collar

Dog Fence collar comes with a pair of long，middle and short static probe posts. If your pet is a short haired pet, please use a short static probe. For long haired or thick haired pets, please use a long static probe (the hair at the static contact point can also be properly trimmed). Please tighten the static probe according to the installation method in this manual.

Step 2: Acquiring the Satellite Signals

• The GPS fence system must acquire satellite signals before you put it on your dog. Acquiring satellite signals will take a few minutes.
• Go outdoor to an open area; Power on the GPS fence system (as per Step A above) and the LED display flash “00”(as per Step B above);
• Now the GPS fence system automatically starts searching the GPS signal and positioning the central point at the current position. It will take about1-2minutes.

Once successfully searching and positioning the LED display will show the numbers of connected satellites and the GPS locker on the screen will be lighted up in green(as per Step C above); short press power key to set current location as central point. if can not acquiring satellite signal after 5 minutes then please try again or change other place for GPS searching and positioning.

Shows the GPS signal strength

• After setting the center point and the radius distance, please leave the center point and move to the border where the collar will beep and vibrate. At this time, the current position is the boundary place, you can place several boundary flags or signs to help dog to understand this training.
• You can start to train your dog after the above operations are completed.

START TRAINING

Please set up a separate collar belt on your pet’s neck, and tie a traction rope. The traction rope cannot be put on the GPS Wireless collar Bring some treats that you can give pet award during training

Step 1: Training the function of GPS wireless fence for dogs

1. Let the dog wear the wireless fence collar in the setting area, then lead the dog to the boundary(1), this time the wireless fence collar will start to work, sound vibration and click for 15 seconds, at this time, lead the dog back to the boundary, the fence stops working(2).
2. Praise the dog’s performance and reward it with a snack to relax and prepare for the next training.
3. Repeat actions 1 and 2 about 3 to 5 times, taking about half an hour to finish the first day of training!
4. Note, if your dog has not used the electric shock training collar, please set the electric shock intensity to 0 for the first time and 1 for the second time during the first training session, and slowly let your dog accept it.
5. Normally need 8-10 times to repeat this training, according to your dog to accept the situation, then you can let your dog free to wear the collar in the area you set up activities, so the training is complete! While watching your pet in the yard, you can also do other things. Just check your pet regularly to prevent it from escaping.
6. You can strengthen the training if your pet escapes multiple times.

Step 2: Training the function of GPS wireless Barrier for dogs

1. Go out side and Successfully acquire the GPS signal and GPS positioning successful.
2. Long press up button to enter display “AA” interface.
3. There are 1-30 points you can use, short press M button to shift 1-30 number.
4. Short press the down button to lock this position point, then button shows a lock, This pet barrier setup keeps your pets away from this position point to protects a circular area up to 16feet .
5. If your pool/trash can or other subject’s size are larger than 5 meters(16 feet), you will need to add a few more barriers to protect your pool from dogs.
6. Let the dog wear a good wireless fence collar, first lead the dog to the set protection point, this time the wireless fence collar will start to work, sound vibration and click for 15 seconds, this time, lead the dog away from the protection point, the fence stops working.
7. Compliment the dog’s performance and reward it with a snack to relax and prepare for the next training.
8. Training normally need 8-10 times to repeat this training, according to your dog to accept the situation, then you can let your dog free to wear the collar in the area you set up activities, so the training is complete!

CONGRATULATIONS! YOU HAVE NOW SUCCESSFULLY COMPLETED THE TRAINING PROGRAM.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>