fingers SuperLit Portable Speaker User Guide
- June 11, 2024
- fingers
Table of Contents
- fingers SuperLit Portable Speaker User Guide
- I. Important – Warnings and Safety
- II. In the box
- Ill. On-board Controls
- IV. Connections
- V. Charging
- VI. Modes
- i. BT Mode
- Manage calls
- ii. FM Radio
- iii. MicroSD
- iv. AUX
- Care and Maintenance
- VII. TWS setting
- Disable TWS Setting
- VIII. Product Specifications
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
fingers SuperLit Portable Speaker User Guide
I. Important – Warnings and Safety
- Do not place the speaker near heat sources such as fire, radiators, stoves and other apparatus that produce heat.
- Use only accessories supplied by FINGERS.
- Unplug the speaker once it is fully charged, when unused for long periods of time or during I ig htning/thu nderstorms.
- It is recommended to refer all servicing to qualified personnel. Servicing is required when the speaker has been damaged in any way. Any evidence of any attempt to open and/or alter the device, including any scratch, peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.\
II. In the box
1 x FINGERS Superlit
1 x AUX Cable
1 x USS Charging Cable
1 x Quick Start Guide
1 x Brand Note
Ill. On-board Controls
IV. Connections
V. Charging
– A red light indicates that it is in charging mode. Once it is completely
charged, the red LED glow disappears.
– While blue light indicates when it is in working mode.
VI. Modes
You can enjoy your music in the following ways
i. BT ii. FM Radio iii. MicroSD iv. AUX v. USB
i. BT Mode
-
When the device is switched on, it automatically goes to BT mode.
-
If any source is connected (USB, MicroSD or AUX), press@ till
BT Mode is heard. -
The LED indicator starts flashing in blue, signifying that it is ready to pair a device.
-
As it flashes blue, make sure that BT is enabled on your device. Find the device list and select
FINGERS SuperLit. The BT button turns solid blue for a moment, a sound prompt of “Connected” is heard and it is ready to play.
Manage calls
Can receive/end calls from the speaker, if your mobile device is connected to the speaker through BT.
ii. FM Radio
- Press on the mode button till the voice prompt of the word “FM Mode” is heard.
- Once FM radio is tuned, you can short press 8 and EB to select the desired FM channel.
- Alternatively, you can long press @ to scan the stations automatically. You can again press the same button to stop the scan.
- Quick Tip: Plug the AUX Cable to get better FM Radio experience
iii. MicroSD
- Insert the MicroSD card in the provided port.
- You can then play your favourite tracks directly from the MicroSD Card.
iv. AUX
- If you wish to listen to music from mobile devices, plug in the AUX cable in the Aux port.
- You can then stream music directly from your mobile devices .
Care and Maintenance
- Switch off the speaker before cleaning it.
- Use soft, damp cloth (water only) to clean the surface.
- Do not use any chemicals, solvents, or cleaning solutions containing alcohol, ammonia or abrasives.
- Do not allow any liquid to enter into any of the openings.
- Tested under ideal conditions and varies depending on usage, volume levels and RGB lights.
- Images shown may vary from actual product. • Specifications, features and appearance are subject to change without notice. • All logos, brands, trademarks and product names are properties of their respective owners. • Product warranty is governed by warranty terms mentioned on www.fingers.co.in • This product falls under e-waste (Management & Handling) Rules, 2011. For proper disposal method, visit our website www.fingers.co.in
VII. TWS setting
- To begin pairing, bring two Superlit speaker in proximity of each other within 1 m distance and switch ON the power.
- Long press (9 on both the speakers. These two speakers will get interconnected and a voice prompt will be heard when successfully connected as TWS mode.
- Find the device list and select FINGERS SuperLit. After successfully connection with one of the portable speakers, the second one automatically gets connected.
Note: TWS function can only be enabled to pair two FINGERS SuperLit Portable Speaker in BT mode.
Disable TWS Setting
- Switch the mode of one of the speaker to “MicroSD” or “FM Radio” by pressing @ , then the TWS will get disconnected.
- If you wish to establish TWS connection again – Switch the mode back to “BT” mode and it will then connect automatically.
VIII. Product Specifications
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>