FINGERS Satin 2150 LED Monitors User Guide

FINGERS Satin 2150 LED Monitors

Important – Warnings & Safety Instructions

1. Do not place the product near heat sources such as fire, radiators, stoves, light candles and other apparatus that produces heat.
2. Use only those accessories supplied by FINGERS.
3. Refer all servicing to qualified personnel. Servicing is required when the monitor has been damaged in any way. Any evidence of any attempt to open and/or alter the device, including any scratch, peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.

In the box

• 1 x FINGERS Satin-2150 (LED Monitor)
• 1 x FINGERS DC-250 (Power Adapter)
• 1 x HDMI Cable
• 1 x Monitor Stand set
• 1 x Screw Set
• 1 x Back Cover
• 1 x Quick Start Guide
• 1 x Brand Note

On-board Controls

Installations Steps

1. As shown in 1, place a protective film or soft cloth on a flat table. Avoid any hard object such as screws on the table.
2. Then place the LED monitor on the flat table like shown in 2.
3. As shown in 3 – Fix the support bracket using the screws provided and then tighten them with a screwdriver.
4. As shown in 4 – Fix the base at the installed support bracket with screw and tighten it with a screwdriver. Then finally lift the LED monitor from the foam by holding at the support bracket and place it on the table.

VIEWING ADJUSTMENT

To get the best viewing, we suggest you facing at the front of the monitor to adjust to your perspective according to your personal preference. Please hold the monitor stand support during angle adjustment to avoid directly touching on the display. The display angle can be adjusted within -5° to 15° range.

Note:

1. Make sure there are no objects surrounding the monitor before adjusting the monitor angle, to prevent the bump of monitor screen with any objects during the adjustment.
2. Make sure the monitor is on a flat table and not on unbalanced surface, during the adjustment.
3. We recommend holding the base stand while adjusting the angle and gently adjust the angle by holding the top of the monitor with another hand.

Care and Maintenance

1. Unplug the monitor power plug before cleaning it.
2. Use the cleaning kit & spray the cleaning liquid on the cleaning cloth, and then gently wipe on the display surface.
3. Use soft cloth to clean the surface.
4. Plug in the monitor power plug after the cleaning process is complete and then switch on the monitor’s power.
5. Do not use any chemicals, solvents, or cleaning solutions containing alcohol, ammonia, or abrasives.
6. Do not allow any liquid to enter into any of the openings.

Technical Specification

fingers.co.in I Ver.: 1.0.0

Images shown may vary from actual product.

• Specifications, features and appearance are subject to change without notice.
• All logos, brands, trademarks and product names are properties of their respective owners.
• Product warranty is governed by warranty terms mentioned on www.fingers.co.in
• This product falls under a-waste (Management & Handling) Rules, 2011. For proper disposal method, visit our website www.fingers.co.in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>