SONOFF Curtain Remote Controller User Guide
- June 11, 2024
- SonOFF
Table of Contents
SONOFF Curtain Remote Controller User Guide
Product Introductions
The Curtain Remote is used with SONOFF Curtain Motor, one Curtain Motor can be paired with and controlled by up to 10 Curtain Remotes. One Curtain Remote can be paired with multiple (unlimited) Curtain Motors to open or close them by one click.
Die Curtain Remote wird mit dem SONOFF Vorhangmotor verwendet, ein Vorhangmotor kann mit bis zu 10 Vorhang-Fernbedienungen gekoppelt and gesteuert werden. Eine Curtain Remote kann mit mehreren (unbegrenzten) Vorhangmotors gekoppelt werden, um sie mit einem Klick zu offnen oder zu schlieBen.
Pairing & Clearing of Curtain Remote and Curtain Motor
- Power off the Curtain Motor, long press the pairing button and then power on the Curtain Motor to wait for about 5s until the LED indicator turns green and keeps on, then release. Now Curtain Motor has entered the Curtain Remote pairing state.
- Press any button on the Curtain Remote within 10s, then LED indicator will turn off and the Curtain Motor will move forward and backward briefly once, now the pairing is successful between Curtain Motor and Curtain Remote.
If the Curtain Remote does not been paired within 10s, please follow the above steps and pair them again.
LKET!
Glad to know you are satisfied with SONOFF products. It would mean a lot to us
if you can take a minute to share your buying experience.
Share it on Amazon
Share it you social media
Share it with your friends and family
Get the latest news by following us:
New arrival Promotion How-to videos
HAVEA PROBLEM.
We are so sorry for the inconvenience caused by the product. Please contact us
for hel. via the email address below.
support@itead.cc
We will get back to you as soon as possible.
Clearing
Power off the Curtain Motor, long press the pairing button and then power on the Curtain Motor, wait for about lOs until the LED indicator flashes green quickly, then release. Now all paired Curtain Remotes are cleared from ZEICurtain.
Schalten Sie den Vorhangmotor aus, drucken Sie lange auf die Kopplungstaste und schalten Sie dann den Vorhangmotor ein. Warten Sie etwa 10 Sekunden, bis die LED-Anzeige schnell gran blinkt, und lassen Sie dann los. Jetzt werden alle gekoppelten Curtain Remotes aus dem Vorhangmotorgeloscht.
Mettez le Moteur de rideau hors tension, appuyez longuement sur le bouton d’appariement puis mettez le Moteur de rideau sous tension, attendez environ 10 secondes jusqu’a ce que le voyant LED clignote rapidement en vert, puis relachez. Toutes les Curtain Remote appariees sont maintenant effacees du Moteur de rideau.
Product Parameter
Model: Curtain Remote Power supply: 3V DC (button cell x 1) Working temperature: 0°C- 40°C Product Size: 110x50x10mm
Frequency band: 2.4GHz Battery model: CR2032 Casing material: ABS VO
Curtain Remote Base Installations
-
Stick with 3M adhesive
-
Fix with screw
Replace the battery
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that
the radio equipment type Curtain Remote is in compliance
with Directive 2014/53/EU.The full text of the EU declaration
of conformity is available at the following internet address:
https://sonoff.tech/usermanuals
Shenzhen Sonoff Technologies Co., Ltd.
3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
ZIP code: 518000 Website: sonoff.tech
