DE LA ESPADA 392 Coniston Mirror Installation Guide
- June 15, 2024
- DE LA ESPADA
Table of Contents
Installation Guide
INSTALLATION INSTRUCTIONS
CONISTON MIRROR BY MATTHEW HILTON
These instructions apply to all Coniston Mirrors PARTS
1x Mirror
1x Timber wall bracket
HARDWARE
(5x) M5x60 pozidrive screws
(5x) M8x50 wall plug / Rawlplug / anchor
NOTE: It is important to use the correct wall plug for your wall type.
YOU WILL NEED
Cordless drill
8mm drill bit
Philips head screwdriver
The help of a friend
NOTES
NOTE 1: Be certain that all assembly is carried out on a flat and stable
surface. This will ensure a good final result.
Reverse the steps to disassemble the piece.
NOTE 2: Your furniture arrives packed in numerous layers that protect it
during transport. It is important that you remove the packaging carefully to
avoid damaging your furniture. Refer to our information sheet “Unpacking Your
Furniture” for further details.
NOTE 3: Great care is required when assembling our products.
Use blankets to soften the assembly surface – hard surfaces such as wood or
stone flooring may damage the furniture if in direct contact.
NOTE 4: We advise that assembly and disassembly of De La Espada furniture
is undertaken by a minimum of 2 people.
ASSEMBLY INSTRUCTIONS CONTINUED
CONISTON MIRROR
-
ATTACH TIMBER WALL BRACKET TO WALL
a) Hold the wall bracket against the wall where you wish to hang the mirror. Use a leveller to make sure the bracket is level. NOTE: The taller side of the bracket should be away from the wall.
b) Use a pencil to mark the wall where holes should be drilled.
c) Using a cordless drill and an
8mm drill bit, drill holes into the wall where you have marked.
d)
Place the wallplugs into the drilled holes in the wall.
Then, using a Philips head screwdriver, screw a pozidrive screw through each pre-drilled hole in the timber wall bracket and into the corresponding hole in the wall. Tighten firmly.
CONISTON MIRROR -
HANG MIRROR ONTO TIMBER WALL BRACKET
a) Fix the mirror to the wall by sliding the brace on the back of the mirror onto the wall mounted bracket.
b) Installation is now complete.
[email protected]
DELAESPADA.COM