RISE Boom Buds 2 True Wireless Earbuds User Guide

RISE Boom Buds 2 True Wireless Earbuds

What’s Included

• 2XEARBUDS
• 2 X PAIRS OF EAR TIPS (one installed on earbuds
• USB-C CHARGING !’.ABLE
• CHARGING CASE

How To Connect Your Earbuds

1. Remove earbuds from the charging case supplied.
2. Turn on your bluetooth device and search for ‘BOOM BUDS 2’ connect.
3. When successfully connected, a prompt will appear saying “headset is required to pair “select OK and connect.
4. Your device should be successfully paired.
5. If your earbuds are struggling to pair please try resetting them by following instructions ‘How to Reset Your Earbuds’.

Lost Connection

• If you lose connection when out of range, the device should automatically re-connect when It’s back in range within 30 seconds.
• If you are out of range for longer than 30 seconds, you need to manually press the earbuds touch button to re-connect.

How To Reset Your Earbuds

• Quickly tap the button on both earbuds 9 times simultaneously and wait for 3-5 seconds.
• Once successfully reset, both earbuds should blink a green light for another 3 – 5 seconds.
• One earbud will then stop blinking and the other will
• flash red and green. This means it is searching for a device to connect to.
• Follow the instructions ‘How to Connect Your Earbuds’ to try again.

Troubleshooting Advice

Earbuds can only operate when connected to 1 device at a time. If you wish to establish a new connection, please disconnect from the current device, and reconnect to the new device. If the earbuds cannot be connected, simply place the product back into the charger case and wait for all lights to turn off. Once lights are off, remove earbuds from charging case and start the “How to Connect your Earbuds” process again.

General Use

• Tap the left or right earbud once to pause and once to play.
• Tap the left earbud two times to listen to the previous song.
• Tap the right earbud two t times to play the next song.
• Tap the left or right earbud t hree times to speak to your voice assistant.
• Hold down the left earbud to reduce volume.
• Hold down the right earbud to increase the volume.

How To Answer Calls

• Tap the left or right earbud once to answer phone.
• Tap the left or right earbud twice to decline a call.
• Hold down t he left earbud to reduce the volume.
• Hold down the right earbud to increase the volume.

How To Cllarge Your f.arlrnds

• Insert the charging cable into the USA c port on the ch; rglng c;.; is:e.
• Conned the USB plug until a s, ic: ket & tum It on.
• The case will start ctlalJlng & the LED Indicator located Jnslde the charging c;;,se will rum on.
• after charging has completed, the LED Indicator wtl I automatically tum off,

TECHNICAL INFORMATION

Speakers infllrmation

• Model 6 round speaker
• Size !p6mm•3.8mm
• impedance!! 320
• Rated Power 2WM
• Mplmum Power SWM
• FrequencY Response 20hz-20kl1z
• SensltMty 92±2db
• THD 20hz-5Khz Max50 percent

Earbuds battery

• Battery Model 501012
• standard Volt;i,age 3.” N
• Minimum Capacity -40mAh
• Typical CaPKlty 43mAh
• Olarge Cut Off Voit;i,ge 4.25V
• Discharge Cut Off Voit; I,ge 3.3V
• standard Charge 20MA
• Maximum Charge 40MA
• stand a rd Dlscha rge 20MA
• Maximum Dlscha rge 40MA

Charging case battery

• Standard Voltage 3.” N
• Minimum Capacity 300mAh
• Typical Capacity 305mAh
• Charge Cut Off Voltage 4.25V
• Discharge Cut Off Voltage 3.3V
• standard Charge 60MA
• Maximum Charge 1 S0MA
• standard Discharge 60MA
• Maxlmu m Discharge 1 S0MA

Temprature lnfomatlan

• OperaUng Temperature O”to 4’1″
• Storage Temperature -10″to 60″

Ovarall dimension and weight

• Earbuds S1ze 21.81 •20.01 •2z.e1 mm
• Charging case slze 62.3″38.111″28. 79mm
• Earbuds Weight 4.5g
• Charging case Weight 33.8g

GENERAL PRECAUTIONS

Keep your eartuds away from fire or water. Do not drop, dlsas~mble or attempt to repair the product by yourself. Do not use if damaged or if you notice any irregularity. Read the lnstuctlon manual before use, warranty does not cover wrong usage or human error or damage.

FCC STATEMENT

Thl5 device com pH es with part 15 af the FCC Nies. Operation is subject to the following  two conditions

this device may not cause harmful
Interference. and

1. th ls d evlce must accept any Interference received., Including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digita I devise, pursuant to part 1 s of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference In a residential Installation. This equipment generates uses and can radiate rad Io frequency energy and, If not installed and used In accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If thl5 eq u I pment does cau5e harmful I interference to radio or television reception. which can be d eterrni ned by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the 5eparation between the equipmentand receiver.
• Connect the equipment Into an outlet on a drcu It differs from that to which the receiver Is connect
• Consu It the dealer or an experienced rad lo TVtechnidanfor help.

The device has been evaluated to meet general RF exposure requirements. The device can be used In portable exposure conditions without restriction.

Importer: Zing Online Media Ltd.
contact: support@risetraveler.com
Made in China
Discover more travel tech at www.risetraveler.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>