SILVERGEAR 3445 Smart Air Purifier User Manual

: June 11, 2024
: SILVERGEAR

Table of Contents

SILVERGEAR 3445 Smart Air Purifier
Smart Air Purifier
Product Package Content
Product Description of Parts
Product Operation
Safety instructions
Package content
Description of parts
Operation
Maintenance
Troubleshooting
Technical speciﬁcations
Disposal
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SILVERGEAR 3445 Smart Air Purifier

SILVERGEAR-3445-Smart-Air-Purifier-product

Smart Air Purifier

The Smart Air Purifier is designed to provide clean air in your home. It comes with a filter that needs to be removed from the packaging before use. The device has a control panel with various modes and buttons that allow you to adjust the fan speed, turn on/off the UV-C light bulb, and set a timer. It also has an air quality indicator that changes colour according to the detected result of the sensor.

Safety Instructions

The air purifier should only be used under adult supervision, and all hazards must be taken into account.

Product Package Content

Air purifier
Manual

Product Description of Parts

The air purifier consists of the following parts:

Control panel
Outlet cover
Upper body
Decorative ring
Lower body
Filter
Base cover
UV-C bulb

Product Operation

Preparations

To open the base cover, turn it anticlockwise to the OPEN position.
Detach the base cover and take out the filter.
Dispose of the packaging material.
Place the filter back into the air purifier. Make sure you insert the filter in the correct position.
Turn the base cover clockwise to the LOCK position, until you hear a `click’ sound.

Explanation Modes / Buttons

A. UV-C technology – Press the UV-C button to turn on/off the UV-C light bulb.
B. Sleep mode
- In Sleep mode, the air purifier works very quietly. Also, only the Sleep mode light is on.
- Press any other button to exit Sleep mode.
C. Fan speed
- Press the Speed button to adjust fan speed level.
- There are four levels: Low, Medium, High and Auto mode.
- In Auto mode, the fan speed automatically adjusts according to the AQ level.
D. On/off
- Connect the air purifier to the mains.
- All the lights turn on once, and you will hear a beep.
- Press the On/Off button to switch on the air purifier.
E. Timer
- Press the Timer button to turn on/off the timer.
- Press again to cycle through the timer options: 2/4/8 hours.
- The air purifier automatically powers off once the timer is finished.
- Pressing the Timer button or unplugging the air purifier will cancel the timer.
F. Air quality (AQ status)
- The air quality indicator automatically changes colour according to the detected result of the sensor.
- AQ colour / AQ level / Fan speed
- Blue / Very good / Sleep
- Green / Good / 1 (Low)
- Orange / Unhealthy / 2 (Medium)
- Red / Hazardous / 3 (High)
G. Filter reset
- When the Filter reset button lights up, you need to check the filter. It may need to be cleaned or replaced.
- The filter’s lifetime is based on your house air quality and usage.
- Using the air purifier in a humid environment will reduce the lifetime of the filter.

Other Features

Nightlight mode (standby)
- Can only be used when the air purifier is off.
- Press the Light button to turn on the amber nightlights (orange).
- Press the Light button again to halve the brightness.
- To turn off the nightlights, press the Light button for a third time.

Thank you for purchasing our smart air puriﬁer. This manual will provide instructions for effective and safe use of the device. Please read it carefully before use and store the manual in a safe place for future reference. If you ever pass the product on to others, this manual should be included.

Safety instructions

For intended use only, as described in this manual.
For indoor use only.
The product is safe to use by children from the age of 8 and by persons with reduced physical or mental capabilities, or with lack of experience or knowledge, but only under supervision of an adult and with taking into account any hazards.
Maintenance should be done by or under the supervision of an adult.
Before use, inspect the device and its parts. Do not use in case of damage.
Do not use outdoors or operate where aerosol (spray) products are being used.
Do not place, store or use the product near water.
Do not immerse in water.
Do not let moisture come into contact with any electrical parts.
Do not use the product in extreme hot, cold or humid environments.
Do not place near heat sources such as radiators, cookers, etc.
Keep away from sources of ignition.
Do not drop or insert any objects into the openings of the device.
Attachments not recommended by the manufacturer may cause hazard.
Keep the cord out of harm’s way.
Always unplug before installing, removing or adjusting any of the accessories and for long-term storage.
Keep the device upright.
Place the product on a solid level surface.
Leave at least 38cm free space on all sides of the appliance.
Do not place anything on top.
Do not attempt to repair, disassemble or alter the product yourself.

Package content

Air puriﬁer
Manual

Description of parts

SILVERGEAR-3445-Smart-Air-Purifier-fig
2

Air puriﬁer:

Control panel
Outlet cover
Upper body
Decorative ring
Lower body
Filter
Base cover
UV-C bulb

Control panel:

A. UV-C mode
B. Sleep mode
C. Speed
D. On/Off
E. Timer
F. Air quality & light
G. Filter reset

Operation

Preparations
The air puriﬁer comes with its ﬁlter ﬁtted inside, but you have to remove the packaging of the ﬁlter before use.

To open the base cover, turn it anticlockwise to the OPEN position.
Detach the base cover and take out the ﬁlter.
Dispose of the packaging material.
Place the ﬁlter back into the air puriﬁer.
Note: Make sure you insert the ﬁlter in the correct position.
Turn the base cover clockwise to the LOCK position, until you hear a ‘click’ sound.

Installation Smart Life app and pairing

Plug the device into the mains.
All the lights come on once and you hear a beep. Then the lights will turn off again.
Press the On/Off button to turn on the device.
Search for the Smart Life app in the Apple Store or in Google Play, or scan the QR code:
Log in with an existing account or create a new one.
Press and hold the On/Off button to connect to Wi-Fi. The indicator light starts to ﬂash when entering pairing mode.
Tap Add Device or the plus icon (+) in the top right corner on the Home page.
Select the section ‘Small Home Appliances’ and then ‘Air Puriﬁer’ (Wi-Fi).
Enter your Wi-Fi name and password.
Follow the on-screen instructions to complete pairing. When the pairing was successful, the On/Off button remains lit.

Explanation modes / buttons
UV-C technology

Press the UV-C button to turn on/off the UV-C light bulb.

Sleep mode

In Sleep mode, the air puriﬁer works very quietly. Also, only the Sleep mode light is on.
Press any other button to exit Sleep mode.

Fan speed

Press the Speed button to adjust fan speed level.
There are four levels: Low, Medium, High and Auto mode.
In Auto mode, the fan speed automatically adjusts according to the AQ level.

On/off

Connect the air puriﬁer to the mains.
All the lights turn on once and you will hear a beep.
Press the On/Off button to switch on the air puriﬁer.

Timer

Press the Timer button to turn on/off the timer.
Press again to cycle through the timer options: 2/4/8 hours.
The air puriﬁer automatically powers off once the timer is ﬁnished.
Pressing the Timer button or unplugging the air puriﬁer will cancel the timer.

Air quality (AQ status)

The air quality indicator automatically changes colour according to the detected result of the sensor.

AQ colour	Blue	Green	Orange	Red
AQ level	Very good	Good	Unhealthy	Hazardous
Fan speed	Sleep	1 (Low)	2 (Medium)	3 (High)

Filter reset

When the Filter reset button lights up, you need to check the ﬁlter. It may need to be cleaned or replaced.
The ﬁlter’s lifetime is based to your house air quality and usage.
Using the air puriﬁer in a humid environment will reduce the lifetime of the ﬁlter.

Other features
Nightlight mode (standby)

Can only be used when the air puriﬁer is off.
Press the Light button to turn on the amber nightlights (orange).
Press the Light button again to halve the brightness.
To turn off the nightlights, press the Light button for a third time.

Memory function
The air puriﬁer has a setting memory. It will return to the last setting when you turn it on again.

Maintenance

General information

Always turn off and unplug the air puriﬁer before cleaning.
Regularly clean the outside of the ﬁlter and both the air inlet and outlet with a vacuum cleaner. At least every two weeks.
Wipe away any dust with a soft dry cloth, cotton swabs or a soft brush.
Store it in a dry, cool place away from direct sunlight.

Note: The ﬁlter is not washable.

Filter replacement
It is recommended to change the air ﬁlter every 6–8 months. However, you may need to change your ﬁlter sooner or later depending on how often you use your air puriﬁer. It is important to watch out for the following signs of expired ﬁlter:

Increased operating noise
Decreased airﬂow
Clogged ﬁlter
Increased presence of odours

Note:

The environment in which the air puriﬁer being used may also extend or shorten the lifetime of the air ﬁlter. Using your air puriﬁer in an environment of relatively high pollution may mean you will need to change the air ﬁlter more often.
If the air pollution in your environment is very high, there is a possibility that the ﬁlter may not be completely effective and may need to be replaced before the Filter reset button lights up.
Remember to reset the air puriﬁer after changing the air ﬁlter.

How to replace the ﬁlter

Turn off the air puriﬁer. And unplug it.
Turn the device upside down on a soft cloth to avoid scratches.
To open the base cover, turn it anticlockwise to the OPEN position.
Detach the base cover and take out the old ﬁlter.
Place a new ﬁlter back in the air puriﬁer. Remember to remove the packaging material ﬁrst and to insert the ﬁlter correctly.
Replace the cover and turn it clockwise to the LOCK position until you hear a ‘click’ sound.
Plug the device back into the mains and turn it on again.

How to reset the ﬁlter’s lifetime
You need to reset the ﬁlter’s lifetime when the Filter reset button lights up and after replacing the air ﬁlter.

Press and hold the Filter reset button for 3 seconds.
Release the Filter reset button and the light will turn off, indicating the reset is complete.

Hard reset ﬁlter’s lifetime
When using the air puriﬁer in an heavy polluted environment, the lifespan of the air ﬁlter may be signiﬁcantly reduced. You can change the ﬁlter even if the Filter reset button does not light up. Follow the steps below to perform a hard reset.

Unplug and replace the air ﬁlter.
Plug in the air puriﬁer and keep it in standby.
Press and hold the Filter reset button for 3 seconds, and it will light up.
Press and hold the Filter reset button again for 3 seconds, and it will turn off. The reset is now complete.

UV-C bulb replacement
The UV-C lamp is designed to last approximately 5000 hours of use. The UV-C indicator on the control panel will ﬂash RED when the operating time has been exceeded. Note: Do not operate the air puriﬁer without the protective UV-C bulb cover.

Unplug the air puriﬁer and remove the ﬁlter.
Remove the cover to expose the UV-C bulb.
Remove and replace the UV-C bulb. Re-install the UV-C bulb cover, ﬁlter and base cover.
Put the plug in the wall socket and switch on the appliance again.
Press and hold the button for 3 seconds. After hearing ‘Ding’, the UV-C indicator will ﬂash 3 times and then turn off. The reset is now complete.

Warning:

The UV-C bulb contains mercury (Hg). Handle with care.
Eye damage can be caused by looking directly at the light of the lamp when it is on.

Troubleshooting

Index	Problem	Cause	Solution
1	Device does not power on.	Unit is not plugged in.	Connect to a power

socket.
Power cord is damaged.| Unplug immediately and contact customer service.
Device is defective or malfunctioning.
2| Device does not respond.| It is not turned on.| Press the On/Off button to turn on the device.
Device is defective or malfunctioning.| Unplug immediately and contact customer service.
3| Device makes an unusual noise while operating.| Filter packaging has not been removed.| Remove filter from packaging before use.
Fan speed is low.| Press the Speed button to adjust fan speed.
Air filter needs to be replaced.| See Filter replacement section.
Not enough clearance on all sides.| Ensure there is at least 38 cm (15 inches) of clearance.
4| Poor air purification quality.| Air filter needs to be replaced.| See Filter replacement section.
Room is too large.| Ensure the room is smaller than 18m².
Air inlet is blocked.| Clear inlets or outlets.
Filter is not properly installed.| See Filter replacement sections.
5| Filter reset button remains lit.| Device has not been reset correctly.| See Filter replacement section.
6| Device turns on, then suddenly turns off.| Device is defective or malfunctioning.| Immediately discontinue use and contact customer service.
7| Device beeps repeatedly after being turned on or plugged in.

Technical speciﬁcations

Materials	PS, ABS
Size	21.5 x 33 cm (diameter x hight)
Weight	2.5 kg
CADR	smoke 150 m³/h
Coverage area	15-18 m²
Noise level	30-52 dB
Power	35W AC
Max radiated power	-30 dbm
HEPA filter	H13

Disposal

Dispose of the article and the packaging materials in accordance with current local regulations.
The crossed out wheelie bin symbol means that this product shall not be disposed of with normal household waste. Electronic and Electrical Equipment not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances. Please dispose of responsibly at an approved waste or recycling facility.
The CE marking is a certiﬁcation mark that indicates conformity with health, safety and environmental protection standards for products sold within the European Union. The CE marking is the manufacturer’s declaration that the product meets the requirements of the applicable EC directives.
Recycling helps to reduce the consumption of resources and reduce the environmental impact. If you wish to discard the packaging, comply to the environmental legislation in your country.

Declaration of Conformity

Overschiestraat 63, 1062 XD Amsterdam
We hereby declare under our sole responsibility that the following product:

Item n.	3445
Description	Smart Air Puriﬁer

Batch n.| 22937
EAN code| 8711568074335

is in conformity with the relevant provisions of the following directives, including all amendments, with national legislation implementing these directives and the relevant provisions of standards