VICTOR VHRP-1200 Hybrid Turntable User Guide
- June 11, 2024
- VICTOR
Table of Contents
VICTOR VHRP-1200 Hybrid Turntable
Product Information: VHRP-1200 Turntable
The VHRP-1200 Turntable is a high-quality product manufactured by NAXA ELECTRONICS INC. The turntable is designed to play vinyl records and comes with a stylus and tonearm. The product is easy to set up and use, making it an ideal choice for both beginners and experienced vinyl enthusiasts.
Quick Set-Up Guide
Follow the below steps for basic setup of the VHRP-1200
Turntable:
-
Connect to Power Source:
-
Plug the small end of the power cord into the POWER Input on
the back of the unit. -
Plug the large plug into a standard wall power outlet.
-
Press the Power button to turn on the unit.
-
-
Prepare Turntable for Playing Records:
- Remove cap protecting stylus.
- Remove twist tie used to secure the Tone Arm in place.
Please note that this product has been manufactured and sold under the
responsibility of NAXA ELECTRONICS INC. VICTOR and the DOG & GRAMOPHONE logo
are trademarks used under license by NAXA ELECTRONICS INC. For further
information, visit
www.victor-brand.com. All other products,
services, companies, trademarks, trade or product names and logos referenced
herein are the property of their respective owners. To ensure complete
understanding of the product’s operation, please read the entire user manual.
Hybrid Turntable with Bluetooth® & FM Radio
BASIC SETUP OF THE VHRP-1200 Turntable
Connect to Power Source
- Plug the small end of the power cord into the POWER Input on the back of the unit, and the large plug into a standard wall power outlet.
- Press the Power button to turn on the unit.
PREPARE TURNTABLE FOR PLAYING RECORDS
- Remove cap protecting stylus.
- Remove twist tie used to secure the Tone Arm in place.
CONNECT BLUETOOTH® IN
- Press the Power button to turn on the unit and set the Function Dial to BT.
- Press and hold the PAIR button, the Bluetooth icon will blink. The unit will go into Pairing/Discoverable mode.
- The Bluetooth® icon will turn on and blink on the LCD DISPLAY.
- When pairing, remain within 3 feet of the unit.
- Turn on the Bluetooth® function of your device and search for nearby Bluetooth® devices.
- Select “VICTOR VHRP-1200” from the device list when it appears on your device screen. If required, enter the pass code “0000” to pair (link) Turntable with your device.
- When successfully paired and connected, an audible chime will sound and Bluetooth icon will light steadily on the LDC DISPLAY.
CONNECT BLUETOOTH® OUT
-
POWER on the unit, set FUNCTION dial to phono mode.
-
Press and hold BT OUT button. The unit enters pairing mode and BT indicator blinks.
-
Turn on your Bluetooth speakers and begin searching for speakers.
-
If you have several Bluetooth receivers, turn off receivers not
in use to avoid Turntable linking to other unwanted Bluetooth
enabled devices. -
The effective distance between your external device and turntable is 33 feet (10 meters).
-
-
Turntable will auto scan and pair with your Bluetooth receiver nearby, BT indicator will stop
blinking to indicate a connection has been established. -
Play music on Turntable in Phono or AUX mode. You will no longer hear sound on the turntable speakers. Instead, music will be played on your connected Bluetooth® device.
-
Press and hold the BT OUT button when you finish listening in Bluetooth transmitter mode, BT indicator will be off and unit speaker will sound again.
This product has been manufactured and sold under the responsibility of NAXA
ELECTRONICS INC. VICTOR and the DOG &
GRAMOPHONE logo are trademarks used under license by NAXA ELECTRONICS INC.
Further information at www.victor-brand.com.
All other products, services, companies, trademarks, trade or product names
and logos referenced herein are the property of their
respective owners.
READ THE ENTIRE USER MANUAL FOR COMPLETE UNDERSTANDING OF THE PRODUCT’S OPERATION.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>