LIVOO DOS187 Multifunction Trimmer Set User Manual

: June 11, 2024
: Livoo

Table of Contents

General Instructions
CLEANING AND MAINTENANCE
DESCRIPTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LIVOO DOS187 Multifunction Trimmer Set

You have purchased a product LIVOO brand and we thank you. We take great care in design, ergonomics and ease of use of our products. We hope that this product will give you complete satisfaction. This instruction manual is available too on our website www.livoo.fr

General Instructions

PLEASE, TAKE TIME TO READ WELL THE INSTRUCTIONS FOR USE PARTICULARLY BEFORE THE FIRST USE.
A misuse of the appliance can damage it or hurt the user. Assure that you use the appliance for the use for which it is designed; we refuse any responsibilities as for the damages by an incorrect use or a bad manipulation.

WARNING

To reduce the risk of electric shock:

Do not use this appliance nearby water!
WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
Do not immerse the product in water.
Always unplug the USB cable from the unit immediately after use unless it is being charged.
Unplug the unit before cleaning it.
WARNING : To reduce the risk of burns, fire, electric shock or injury to persons:
This appliance is for household use only.
Close supervision is necessary when this appliance is used by, on, or near children or invalids.
Please read the instruction carefully before using
Do not disassemble or refit the product.
If the product or any part is damaged, do not reuse.
Do not use the product near wound, inflammatory or allergic areas.
Keep this product out of reach of children.
Hair clipper can be used by children aged from 3 years under supervision.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision
This product is not a to
WARNING: For the purposes of charging, only use the detachable USB cable provided.
Switch the appliance off and unplug it after each use and before cleaning.
Never leave the appliance unsupervised, particularly if children are around.
WARNING
Keep the appliance dry.
Not suitable for cleaning under an open water tap.
This appliance contains batteries that are nonreplaceable.
This appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
This appliance is intended to be used in household and similar applications such as:

Staff kitchen areas in shops, offices and other working environments
Farm houses
By clients in hotels, motels and other residential type environnements
Bed and breakfast type environments

TECHNICAL INFORMATIONS

CLEANING AND MAINTENANCE

Clean your beard trimmer regularly.

A regular care of your rechargeable beard trimmer and its accessories will extend the life of your equipment.

AFTER EACH USE:

Ensure that the beard trimmer is switched off.
Clean the product using cloth which is slightly dampened in water.
Do not use abrasive cleansers on the equipment, on the comb or its blade.
Never use hair dryer or a heater to dry the product.
Do not submerge the beard trimmer in the water.

Brush cleaning:

The trimming comb can be removed from the main body (trimmer) and cleaned using cleaning brush available in the box.
Brush off carefully and blow if necessary in order to remove the remaining beard hair on the blade.
Do not use wire or abrasive brush so as not to damage the beard trimmer.

Caution on lubrication:

Apply only light oil similar to the one supplied in this kit.
Lubricating is must in the space between stationary and moving blades with 1-2 drops of oil which keep blades sharpness and also enhance operating time.

Comb washing :

Remove the comb.
Rinse it under clean running water.
Allow it to dry completely.

DESCRIPTION

Charging your hair clipper:

Do not recharge the unit in temperatures lower than 0’C or more than 40’C ambient

Before using your multifunction trimmer, ensure the product is switched off.
Connect the USB cable.
2 hours for a complete charge.

Adjusting the trim length:

The hair guide comb can give you four different cutting lengths, namely 3mm, 6mm, 9mm and 12mm.
The guide combs have 4 position levels, 3mm, 4mm, 5mm and 6mm.

To Attach a Comb:

Hold the comb with its teeth upward
Guide the comb rails into the slots on the front of the clipper head. Then push the rear side of comb.

To Remove the Comb:

Holding the clipper with the blades facing away from you, firmly tick the comb upward.

Instruction for hair cutting:

STEP 1 – Nape of the neck

Set the comb to 3mm or 6mm.
Hold the clipper with the blade teeth pointing upwards. Begin starting at the center of the head at the base of the neck.
Slowly lift the clipper, working upwards and outwards through the hair, trimming just a little at a time.
STEP 2 – Back of the head
With the comb set at 12mm or 18mm, cut the hair at the back of the head.
STEP 3 – Side of the head
Set the comb to 3mm or 6mm, trim sideburns. Then change the setting to 9mm and continue to cut the top of the head.
STEP 4 – Top of the head
Use the hair comb attachment and set it to 24mm or 27mm then cut hair on top of the head against the direction in which the hair normally grows.
Always work from the back of the head.
STEP 5 – The finishing touches
Use the clipper without an attachment comb for close trimming around the base and sides of the neck.
To produce a clean straight line at the sideburns, reverse the hair clipper. Place the reversed clipper at right angles to the head, tips of the blades lightly touching the skin and then work downwards.

Instructions for beard trimming
For even cutting, allow the comb attachment/blade to cut its way through the beard hair. Do not force it through quickly.
If you are cutting for the first time, start with the maximum comb length attachment

To thin and taper the beard

Turn the unit on.
Select the desired length setting on the adjustable comb.
Place the flat top of the trimmer comb against the skin.
Slowly slide the through the hair. Repeat from different directions as necessary

The next procedure must be observed for removing the battery.
The hair clipper battery must be removed before discarding the equipment.
Ensure that your hair clipper is disconnected so as to reduce any risk of electrical shock. Discharge the battery fully.
Remove the protection cover situated in a location where you connect the mains voltage adapter and it is removed so as to access the battery compartment. Carry a screwdriver to remove the screw.
Remove the batteries from the equipment. Cut the cables and tab connecting the batteries in the printed circuit and remove them.
ATTENTION: THESE LI-ION CELLS MUST BE RECYCLED OR ELIMINATED IN ACCORDANCE WITH THE EQUIPMENT SCRAPPING.
Do not burn, dismantle, crush or break out the batteries because they can release toxic substances.
Do not expose them to extreme temperatures.
Drop them in the battery recycling bins designed for this purpose or return them to your retailer

Correct Disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)

The European Directive 2012/19/EU on Waste Facilities Electrical and Electronic (WEEE) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product or their local authority office, for details of where and how they can take this item for environmentally safe recycling.

LIVOO
BP 61071
67452 Mundolsheim
LIVOO Logo