MORRIS H2156KS Electric Kettle Instruction Manual

INSTRUCTION MANUAL
ELECTRIC KETTLE

MODEL NO.H2156KS
HOTEL SERIES

Product Structure Graphic

1. Lid Button
2. Spout
3. Lid
4. Body
5. Light
6. Handle
7. On/Off Switch

Safety Tips

• Position on a flat, stable surface.
• Service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product.
• Ensure the water level is between the ‘MIN’ and ‘MAX’ marks. If the kettle is overfilled, boiling water may be ejected.
• Always switch often appliance before removing from the base.
• The appliance must not be immersed in any liquid.
• Do not allow the base to become wet.
• Danger of scalding – avoid steam from the spout or when opening the lid.
• Always switch off and disconnect the power supply to the appliance when not in use.
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified persons in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless  they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that  they do not play with the appliance.

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your product.

Pack Contents

The following is included:
Kettle and tray
Instructions manual and warranty card
We prides ourselves on quality and service, ensuring that at the time of packaging the contents supplied are fully functional and free of damage.
Should you find any damage as a result of transit, please contact your dealer immediately,

Operation

To use:

1. Lift the lid and fill with cold water. Do not exceed the ‘MAX’ level.
2. Close the lid securely.
3. Connect the appliance to a mains power supply.
4. Push the power switch down to the T position. The power indicator lighl turns On and the water will begin to boil.
5. When the water has boiled the switch will flick back up to the ‘0’ position. The power indicator light will turn Off.

Note: Before using the appliance for the first time fill and boil it twice.
Discard the water each time.
Note: The boiling process can be interrupted at any time by manually flicking up the switch.
WARNING: There is a danger of scalding from steam. Take care during operation and when opening the lid.

Cleaning, Care & Maintenance

• Always turn off and disconnect the appliance from the power supply before cleaning.

• Use soapy water and a damp cloth to clean the exterior of the appliance.
  The appliance must not be immersed in any liquid.

• Dry thoroughly after cleaning.

• Periodically clean the inside of the appliance using a suitable descaling solution.

Troubleshooting

plugged in correctly and switched on
Plug and lead are damaged| Call agent or qualified technician
Power supply| Check power supply
Internal wiring fault| Call agent or qualified technician
Thermos control fault| Call agent or qualified technician

Electrical Wiring
Make sure that the power supply corresponds to the one shown on the product. The plug must be connected to a suitable mains socket.
This appliance must be earthed, using a dedicated earthing circuits. If in doubt, consult a qualified electrician.

NOTICE ABOUT RECYCLING

**** Your product is designed and manufactured with high quality materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of- life, should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/ recycling centre.
In the European Union there are separate collection systems for used electrical and electronic products.
Please help us to conserve the environment we live in!

DECLARATION OF CONFORMITY

Herewith, Amiridis-Savvidis S.A. states that this product, complies with the requirements of below directives:
EMC-Directive: 14 /30/EU
Low Voltage Directive: 14 / 35 / EU
CE Marking: 93 / 68 / EEC
RoHS Directive: 11/65 /EU & 15/863 / EU
The detailed declaration of conformity can be found at www.morris.gr

Aniridias — Sawvidis S.A.
87A, 17″ Noemvriou stir, P.C. 55534
Thessaloniki — Greece
T: +302310944944 | F: +302310944940
www.amiridis-savvidis.ar.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>