CENTEK CT-0011 Electric Kettle Instruction Manual

CT-0011 Electric Kettle
Instruction Manual CT-0011
ELECTRIC KETTLE

CT-0011 Electric Kettle

DEAR CUSTOMER!
Prior to operating the appliance, please carefully read the present manual which contains important information regarding its proper and safe operation. Take care not to lose the present manual. The manufacturer will not be responsible for any damage resulting from improper use of the appliance or from non-observance of the instructions and  provisions of the present manual, as well as from attempts by unskilled persons at repairing the appliance. Should You decide to transfer the appliance to another person, please pass the present manual over along with it.
This appliance is designed for use in domestic and similar applications, in particular:
– in personnel kitchen zones at stores, offices and industrial facilities;
– at agricultural farms;
– by clients at hotels, motels and other residential facilities;
– in private boarding houses.
PURPOSE OF THE APPLIANCE: The kettle is designed for heating and boiling drinking water.

SAFETY PRECAUTIONS

The following requirements should be strictly observed in order to avoid situations hazardous for human life and health, as well as premature failures of the appliance:
– Carefully read the present manual prior to operating the appliance.
Retain the present manual, cash voucher and appliance packaging.
– Use the appliance only for its intended purpose.
– This appliance is not designed for commercial applications. Do not use the appliance outdoors.
– Do not place the appliance near heat sources, do not expose it to direct sunlight and moisture (do not submerse it in water or other liquids).
– Do not touch the appliance with wet hands. In case of ingress of moisture or leakage from the appliance immediately disconnect it from power supply.
– Always disconnect the appliance from power supply after use and before cleaning (pull the plug, do not pull it out by the cable).
– Do not let children play with the appliance. Do not leave the appliance unattended. Ensure that the power cable is routed in a location inaccessible for children.
– Regularly check the appliance and its power cable for damage.
Operating a damaged appliance is not allowed.
– Do not attempt to repair the appliance yourselves, apply to certified technicians. In case of damage to the power cable have it replaced by the Manufacturer, an authorized service centre or other skilled personnel.
– Only the use of original spare parts is allowed.
– Special instructions for transportation (shipment) and sale: none.
SPECIAL SAFETY REQUIREMENTS
– Fill the kettle with cold water only.
– Ensure that the kettle is turned off before removing it from the base!
– Ensure that the lid is firmly closed before turning the kettle on.
– Do not attempt to boil water in the kettle with the lid open, this will
prevent the automatic shutdown from functioning and may cause a fire.
– Use the kettle only together with the base supplied with it.
– Avoid contact of water with the surface of the kettle and the power base.
– The water level should be between the MAX and MIN marks! If the kettle is folled over the maximum level mark, boiling water may spill out!
– Use the appliance only with the proper connector.
– The appliance is not designed to be powered from an external timer or other separate remote control system.
– CAREFUL: accessible surfaces of the appliance can reach high temperature during operation. Do not touch the hot surfaces.
– The appliance should not be used by physically, sensory or mentally handicapped persons (including children) or by persons without sufficient experience or knowledge, unless such persons are under supervision, or have been instructed on the use of the appliance, by the persons responsible for their safety. Take precautions not to children play with the appliance.

APPLIANCE DESCRIPTION

1. Handle
2. Cover
3. ON/OFF button
4. Non-heating housing
5. Power base with cord compartment
6. LED indicator

SCOPE OF SUPPLY

– Electric kettle – 1 pc.
– Kettle base – 1 pc.
– Operating Manual – 1 pc.

OPERATING PROCEDURE

– Retain all packaging materials until you make sure that the kettle operates properly.
– Ensure that the power supply grid voltage corresponds to the one indicated on the kettle’s base before operating it.
– Do not operate the unit with damaged power cable or plug.
– Before the first use boil and discard water two times. It is recommended to add some citric acid to the water for the first boiling. The kettle is designed for boiling pure water only.
– Place the kettle on a smooth level surface. Do not place the kettle at the edge of a table.
– Connect the kettle to an electric socket. Excessive power cord can be wrapped around the guides inside the base and draw its end through the cutout in its side.
– Do not let the power cord hang from a table where a child can pull on it.
– Do not place the kettle near heating appliances and hot surfaces.
KETTLE OPERATION
– Before connecting the kettle to power supply ensure that the main power switch is in the OFF position.
– Hold the kettle by the handle and lift it vertically from the base. Open the lid. Do not pour hot tap water into the kettle. Open the tap and let the water flow for some time to make sure it is clean.
– Pour water into the kettle. Check the water level by the level gage in the housing.
– Do not overfill the kettle above the MAX mark. Be careful: if overfilled hot water may be spilled put from the spout.
– Close the lid until a click is heard. The kettle may not turn on if the lid is not firmly closed.
– Connect the kettle to power supply. Set the power switch to the ON position. The LED indicator will go on. The kettle will turn off automatically when the water boils. The indicator will go out.
– Before dispensing water from the kettle wait for it to stop bubbling. For a repeated boiling set the switch to the ON position. The power switch will not be retained in the ON position for several seconds after boiling.
Do not manually retain the switch in the ON position! The heating may be stopped at any time by pressing the ON/OFF button.
– Take the kettle from the base vertically, holding it by the handle. Some condensation may be visible on the top side of the base after the kettle is removed. This is normal and not a sign of malfunction.
ATTENTION! Do not turn the kettle on the base to avoid spilling out of hot water! Ensure that the kettle is turned off before removing it from the base! Do not open the lid during boiling!
DRY OPERATION SAFETY
The kettle is equipped with a system the automatically turns it off when it is accidentally turned on without water or with an insufficient amount of water inside. If the system is tripped disconnect the kettle from power supply and let it cool down for 15 minutes. After that you may resume operation of the appliance. An unpleasant odor may occur if the safety is tripped.

MAINTENANCE SCALE REMOVAL

Regularly remove scale using special descaling chemicals. Follow the instructions on the packaging. You may also use a weak citric acid or vinegar solution to remove scale. Do not try to use a more concentrated solution as it may lead to corrosion and leaks from the appliance.
ATTENTION! The guarantee undertakings do not cover the damage caused by improper scale removal.
CLEANING
– Always disconnect the appliance from power supply before cleaning!
– Clean the outer surfaces of the kettle, if necessary, with a slightly dampened cloth without detergents.
– Do not submerge the kettle or base in water.
– Do not use abrasive cleaning agents and solvents to clean the kettle.

SPECIFICAIONS

– Nominal voltage: 220–240 V ~50/60 Hz
– Capacity: 1,8 l
– Nominal рower rating: 1850-2200 W

DISPOSAL

Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.

CERTIFICATION DATA, GUARANTEE

The service life of this item is 5 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance has malfunctions, apply to the CENTEK TM Authorized Service Center. The address of the service center can be found on the we bsite https://centek.ru/servis.
Service support
contacts: Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General
Service Center: OOO «Larina-Servis», Krasnodar, Phone: +7 (861) 991-05-42.
The product is provided with the Certificate of Conformity:
№ ЕАЭС RU C-CN.ВЕ02.В.02135/20 of 26.03.2020

MANUFACTURER AND IMPORTER INFORMATION

Imported to EAEU by: Individualniy Predprinimatel Asrumyan Karo
Shurikovich. Addr ess: Russia, 350912, Krasnodar, ul. Atamana Lysenko, 23, pgt. Pashkovskiy. Phone: +7 (861) 2-600-900.
DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the date of sale to the end consumer. With this Warranty Card the Manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default.
GUARANTEE MAINTENANCE TERMS

1. The guarantee shall be valid if the following documentation conditions are observed:
   – The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card.
   The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.

2. The guarantee shall be valid if the following operation conditions are observed:
   – the appliance is used in strict accordance with the present manual;
   – the safety rules and requirements are observed.

3. The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.

4. The guarantee does not apply in the following cases:
   – mechanical damage;
   – normal wear of the appliance;
   – non-observance of operation requirements or erroneous actions on the part of the user;
   – improper installation or transportation;
   – natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
   – ingress of foreign objects, liquids or insects into the inside of the appliance;
   – repairs or modifications to the appliance by unauthorized persons;
   – use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility  and telecommunication networks incompliant with national technical standards;
   – failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
   a) remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;
   b) consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
   – for battery-powered appliances – operation with inappropriate or depleted batteries;
   – for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.

5. The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.

6. The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.

7. Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).

The Manufacturer reserves the right to change the design and specifications of the appliance without prior notice.

Warranty Certificate

Attention! Please ask the seller to fill out the warranty card and tear- off coupons in full.
The ticket is valid in the presence of all stamps and marks.
Product……………….
Model………………
Serial number ………………
Date of sale………………..
These tear-off coupons are filled in by a representative of the seller
Product……………
Model………………..
Serial number …………………
DATE OF SALE ……………….
Vendor,……………..
Seller’s address………………
Full name and phone number of the buyer service center
RELEASE DATE ……………
These tear-off coupons are filled in by a representative of the
TYPE OF REPAIR………………………
DATE OF RECEIPT………..

WWW.CENTEK.RU

References

• VK.com | VK
• Сервис - Официальный сайт Centek

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>