Livoo TEA263 Alarm Clock Wireless Charger Fast Charge Instruction Manual

Livoo TEA263 Alarm Clock Wireless Charger Fast Charge

Thank you for buying our LIVOO product. We take great care in design, ergonomics and ease of use of our products. We hope that this product will give you complete satisfaction. This instruction manual is also available on our website www.livoo.fr

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING THE APPLIANCE FOR THE FIRST TIME, PLEASE READ CAREFULLY THESE INSTRUCTIONS BEFORE USING THE APPLIANCE AND SAVE IT FOR ANY FURTHER NEED.

• Do not use other cable than that supplied with the product.
• In case of dysfunction, entrust your wireless charger to a specialist.
• No pieces can be repaired or replaced by the user.
• Any signs of wear and tear please discard immediately.
• Maintain your product shielded from dust, rain, water or from humidity.
• Do not subject your product to sources of inflammation or important heat. Do not throw it to the fire.
• Do not place the wireless charger near magnets.
• Maintain your product out of reach children.
• Wipe clean with a damp cloth only. Do not use detergents.

SPECIFICATION

included)
Charging efficiency| 75%
Size of product| 14010075mm
Weight of product| 0.168kg

Package contents :

• 1 x Micro USB charging cable
• 1 x User Manual

PRODUCT DESCRIPTION

GENERAL OPERATION

Compatible with all devices with QI standard.

Power Connection

• Plug the USB-A end of cable into the power adapter while plug Type-C end into the product.
• The product will be ready and stand by after all indicators are on.

Wireless Charging

• Indicator display: Power connection successful – blue light flashes once
• Standby – light off
• Charging – blue light on
• Charged – light off
• FOD – blue light flashes continuously

Alarm Clock Function
Buttons: M, +, -, night light button.

Time System Setting:
Double click M button to setup 12-hour time system and 24-hour time system. AM and PM will display while 12-hour time system is set.

1. Click M button once to enter hour setting, adjust value with +/-.
2. Click M button once after minute setting, to enter hour setting, adjust value with +/-.
3. Click M button a third time to finish time setting.

Alarm Setting:

1. Press “+” 3 seconds to activate Alarm; Press “-” 3 seconds to deactivate Alarm. Alarm indicator is on while alarm is activated.
2. While activated, press M button 3 seconds to enter alarm hour setting, adjust value with +/-.
3. Click M button once after alarm minute setting, to enter alarm hour setting, adjust value with +/-.
4. Click M button a third time to finish alarm time setting.
5. Alarm bell rings 3 minutes until automatic off while no any operation.
6. Tap product to enter Sleepy Mode when bell rings. Bell rings for two more times after 5 minutes. The indicator flashes and M button is out of function during the Sleepy Mode. If time setting is needed, please long press “-” to stop alarm. All buttons will function normally.
7. If do not need alarm clock, click any button of the products to stop the bell and close alarm clock.

Display brightness setting
Time display brightness can also be adjusted manually to 3 grades. “+” and “-” can be used to adjust display brightness manually. The default grade is max brightness when power is connected. Single click “-”to dark the display one grade.

Night Light Setting:

1. Night light brightness can be adjusted by 3 grades.
2. Click the round button on left side of product to turn on the night light. The default brightness grade is mini brightness.
3. Click again to get mid brightness. Click a third time to get max brightness.
4. Click the round button a fourth time to turn the night light off.

Eco-power function:

1. Button cell inside is only for setting keeping.
2. All functions are out during power disconnection. Functions restored when power is connected.

Note

• Attention : In order to function alarm, wireless charging, night light and USB output all together, power shall be connected by a QC2.0 or QC3.0 adapters. If connected by a 5V adapter, only wireless charging and alarm can work together.
• Do not squeeze or collide.
• Do not disassemble or put into the fire, water, to avoid short-circuit leakage.
• Do not use wireless chargers in severe high temperature, humidity or corrosive environments to avoid leakage of damaged circuits.
• Do not place too close to magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips to avoid magnetic card failure.
• Keep more than 20cm between the implanted medical device (pacemaker, implantable cochlea, etc.) and the wireless charger to avoid potential disruption to medical devices.
• Keep children from the product in case they play the wireless charger as a toy to avoid accidents.
• To clean the charger, make sure the power supply is disconnected.
• Temperature use : 0-45℃.
• Humidity use : 20-85% (40℃)

EU DECLARATION OF CONFORMITY

We DELTA BP61071 67452 Mundolsheim – France Declare under our own responsibility that the article:

• Description : Alarm clock wireless charger fast charge
• Reference : TEA263

to which this declaration applies, is in conformity with the applicable EU harmonization legislation

conformity with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

EU 2011/65/EU et EU 2015/863

(RED) 2014/53/EU| The notified body SGS, n°0598, has delivered the certificate RED-2489 which is valid until 05/03/2026
 | EN301 489-1 V2.2.3
 | EN301 489-3 V2.1.1
 | EN 303 417 V1.1.1
 | EN 62311 2008
 | EN62368-1 2014 + A11 2017

Mundolsheim, the 28/03/2022

Correct disposal of the unit
(Electrical and Electronic Equipment) (Applicable in the European Union and the rest of Europe that have adopted separate collection systems countries) The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal household waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The symbol of the crossed out dustbin is marked on all products to remind the obligations of separate collection. Consumers should contact their local authority or retailer for information concerning the correct disposal of their product.

To know more :
www.guefairedemesdechets.fr

• Non contractual illustration.
• Product information is subject to change without prior notice

References

• Livoo, life in feel-good mode

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>