RidgeMonkey XL Hot Water Bottle User Manual
- June 11, 2024
- RidgeMonkey
Table of Contents
RidgeMonkey XL Hot Water Bottle
INTRODUCTION
Featuring a stretched, tubular shape this hot water bottle provides excellent
heat coverage to keep you warm during the coldest nights.
Due to the unique, extended shape, it can heat a greater area at once, whilst
the soft outer jacket adds a layer of comfort and protection.
proven to help improve circulation, relax muscle tension and soothe aches &
pains, the elongated flexibility of the bottle is ideal for providing heat to
awkward-to-reach areas, such as the back, neck and shoulders.
FEATURES
- 2mm wall thickness provides excellent thermal performance
- Elongated, tubular shape, designed to provide heat to a greater surface area
- Proven solution to soothe aches, pains and relax muscles
- Brushed jacket is comfortable and soft to the touch
- Discreet RidgeMonkey branding completes the unique & stylish design
TECHNICAL SPEC
- Bottle: natural with anti-ageing composite
- Cover: 50% 50% polyurethane
- Approximate weight: SSOg
- Capacity: 2L
INSTRUCTIONS FOR USE
- Check the bottle and stopper for wear and damage prior to each use.
- Do not fill using water from the domestic hot water system as this can considerably shorten the life of the hot water bottle.
- Hold the bottle by the neck in an upright position and fill slowly to avoid hot water splashing back.
- When filling this hot water do not use boiling water and fill to a maximum of two-thirds capacity.
- Do not overfill as this might cause the bottle to burst.
- Expel air from the bottle by lowering it carefully onto a flat surface until water appears at the opening.
- Screw the stopper sufficiently tight to ensure that there is no leakage. Finger tight should be adequate. Finally, make sure the funnel is empty.
- If there is a possibility that prolonged contact With the skin could occur an adequate cover should be used to prevent burns.
- under no circumstance should the hot water bottle be used as a cushion and be sat on.
- prevent contact with hot surfaces. prevent contact with oil or grease.
CLEANING, MAINTENANCE & STORAGE:
- Wipe with a soft, damp cloth and ensure product is fully dry before storage.
- When not in use, drain completely and keep, with the stopper removed, in a cool, dry, dark place.
- Prevent exposure to sunlight.
- Do not place anything on top of the bottle during storage.
SAFETY WARNINGS:
- WARNING HOT WATER BOTTLES CAN CAUSE BURNS. AVOID PROLONGED DIRECT CONTACT WITH THE SKIN.
- DO NOT USE BOILINC WATER.
- DO NOT FILL MORE THAN 2/3 FULL AND EXPEL AIR.
- ENSURE STOPPER IS SECURELY FIXED.
- STORE EMPTY AND WITH STOPPER REMOVED.
- IN THE EVENT OF BURN OR SCALDING: Immediately cool the affected area with cool or lukewarm running water for 20 minutes. Seek medical assistance if required.
Do not use boiling water
This hot water bottle is designed to be partially filled conforms to BS
19702012
IMPORTANT NOTICE
Read and understand these product guidelines before using this product.
Failure to do so may result in serious injury.
Keep all product information and instructions for future reference and pass
them onto subsequent users of the product. The manufacturer is not liable for
cases of material damage or personal injury caused by incorrect handling or
non-compliance
with the supplied instructions. In such cases, any guarantee or warranty shall
be wided.
Retain these instructions for future reference.
GUARANTEE
This RidgeMonkey product is covered by a 24-month guarantee.
For information regarding our guarantee, please Visit:
ridgemonkey.co.uk0
CONTACT US
For any enquiries or comments concerning our products, please use the contact
form on ridgemonkey.co.uk or email
[email protected] and one of our
experienced team will respond as soon as possible.
Alternatively, you can write to us at:
Trading (NW) Ltd, po BOX 289, Widnes, England, WAB 2FP.