Bear ZCQ-A10T2 Electric Health Teapot User Manual

: June 11, 2024
: BEAR

Table of Contents

PREFACE
ASSEMBLY PARTS
CAUTIOUS
MAJOR CHARACTERISTICS
USING METHODS
CLEANING AND PROTECTION
ANALYSIS OF COMMON PROBLEMS
SPECIFICATION
SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bear ZCQ-A10T2 Electric Health Teapot User Manual

Before use the product, please read the user manual carefully & keep it handy for future reference.
Product made for home use only, do not use for commercial purpose.

PREFACE

Thanks you for choosing Bear’s tea maker series! This product is one of the series products of our company. Glass material body, product sleek, elegant fashion, beautiful appearance. Discontinuously heated tea set to give full play to the aroma of tea.

ASSEMBLY PARTS

Notice:
This product picture is for reference only. The specific product appearance and color are based on the actual product.

CAUTIOUS

This instruction manual contains safety and instructions for the correct use of this product. Therefore, please read the manual carefully before using to avoid damage and danger caused by improper use. All safety instructions are for your safety.

This product complies with the technical certification of electrical products and related safety laws;
Make sure that the power supply voltage is the same as the rated voltage indicated on the nameplate of this product before use;
Check the plug and power cord seriously and thoroughly. If any damage is found, repair and replacement should be done only at the manufacturer’s designated maintenance point;
This product is used with AC power, and the socket it uses has a grounding device;
Do not bend or press the wire or let it hang down along the tip or sharp edges. Keep away from heat and moisture;
Must use a single-phase fixed type three-pole socket with a reliable grounding wire. Do not use cord mobile socket and do not share a socket with other appliances;
Do not place this product on the surface of a heat source or beside a heat source, such as the cooker, oven, etc;
The tea boiler can only be used for boiling tea, not for cooking milk, soups, coffee or wine etc;
If there is no water in the tea maker, please do not dry it, otherwise the tea boiler will reduce the service life;
The tea boiler must be watched during the process of boiling water. Please do not let children approach and do not let children pull the power cord;
Please don’t immerse the power cord, plug, and the whole machine in water or other liquids so as to avoid damage to the product and electric shock;
Before cleaning or when not in use, please turn off the power and remove the power plug. Wait until the tea boiler is completely cooled before cleaning;
When the power cord, plug, and other components are damaged, do not use it and send it to the designated mainte-
nance service point for inspection and repair; During use, if a problem occurs, please unplug the power plug from the outlet;
When the water is boiled, high-temperature water vapor can be easily ejected from the spout. Take care no to approach the spout. Do not open the lid when the tea boiler is boiling water;
When filling water, the maximum water level mark must not be exceeded. If the water is filled too much, there may be water spouting when the water boils;
In the process of using the tea maker, it is normal for the body of the teapot to become hot. When pouring water, only use the handle to lift the kettle, and do not touch the hot surface of the teapot body with your hands to avoid burns;
The power base provided with the tea boiler is used only for this tea boiler, do not use for other purposes. When using the product for the first time, it should be filled to the highest level. After boiling, it should be poured out and rinsed with cold water. Repeat twice;
If the power cord is damaged, it must be replaced by the manufacturer or its maintenance department or similar professional to avoid danger;
The tea boiler must be used with the original power base;
Children and individuals with incapacitated individuals need to be supervised by guardians.

MAJOR CHARACTERISTICS

The glass kettle body is matched with plastic cloth which has beautiful shape and elegant appearance. It is noble and fashionable.
The kettle body and the pedestal are separated and designed for safety and convenience.
The temperature controller is Jump-type. It is warming discontinuously so as to give full play to tea.
The 360-degree kettle body can be placed anywhere
Unique spray device makes water and tea fully connected, and it is fast and convenient to boil tea.
It has double dry fire protection device.
The glass kettle body uses high boron material with high safety factor.
Unique anti-skid rubber feet design.
The orange power indicator lamp on the kettle body shows that the tea boiler is working when the lamp is working.

USING METHODS

When the water is filled, the kettle body is removed from the base and the lid is opened so that the water can be filled from the spout.
Notice : Water injection should not be lower than the “minimum” water mark of the water gauge to prevent the heat from getting dry: Water injection should not exceed the “maximum’ water mark of the water level gauge, to avoid excessive loading of water, boil over overflow tea boiler. Notice : If the tea boiler is powered on when there is no water, the safety protection device will start and the power supply will automatically shut off. In this case, the tea boiler should be removed from the power base. and the teo boiler should be cooled down by adding water before it can be used again
Add proper tea leaves or coffee to the spray screen and must use purified water or a filter. Notice : If the tea is too much, the spray structure will not work normally.
Cover the lid, turn on the base and put the teacup on the power base.
Press the switch button and the orange power indicator will light up, indicating that the tea boiler is working; Press the switch button again, the orange light goes out, indicating that the tea boiler is not working.
Notice: When putting the teacup on the base. MY attention to whether the indicator light is on and avoid heating in the anhydrous state.
When the power is on, the tea boiler will be heated at intervals when the switch button is not turned off manually. The orange power indicator light indicates that the tea boiler is working. Notice : Since the tea boiler uses an intermittent heating method, the heating is stopped when the heating temperature reaches a predetermined value. and then the heating is automatically started after the temperature is lowered.

Switch button description

When the power is on, press the switch button, the orange power indicator lights, and the tea boiler starts working;
Press the switch button again, the orange power light goes off, and the tea boiler stops working.

CLEANING AND PROTECTION

Cleaning up scale regularly
Scale is a naturally occurring calcium precipitate that forms when water is heated. It often adheres to the inner wall of the tea boiler and the heating plate. This can affect the service life of the tea boiler and the quality of the water. Therefore, the scale should be regularly cleaned; In normal use, cleaning is usually twice a year (depending on the quality of water in different places); Use vinegar and water in a ratio of 1:2 to load the tea boiler into the “maximum” position and heat it to boil; Allow the mixture to be stored in the tea boiler for 24 hours and then pour off the mixture. Fill with clear water to the “maximum” position and allow the tea boiler to reheat and boil again; After draining the boiling water, the scale removal work is completed. Finally, the interior of the tea boiler needs to be washed with clean water.

Appearance cleaning

If the outside of the tea boiler is dirty, it can be wiped with a wet towel and a proper amount of detergent:
Do not plug in the power plug or place it on the base when wiping. Notice :Do not immerse the teacup or bose in water. use neutral detergents instead of using corrosive cleaners.

ANALYSIS OF COMMON PROBLEMS

Tea boiler does not work or does not heat work In the case of no visible damage to the tea boiler :
a. Check whether the socket and power cord plug is connected properly:
b. Check whether the power cord is in good condition. If the power cord is damaged. it must be replaced by the manufacturer or its maintenance department or similar professional personnel to avoid danger;
c. If the tea boiler is dry, the dry protection device will open automatically. Add a proper amount of cold water to cool the heating plate. Then operate again follow the instructions:
d. Resume working condition: Wait until the tea boiler is completely cool, and the tea boiler can be reset to work. If it does not work, it means that the tea boiler is not yet fully cooled and it needs to wait a while. Usually about 10 minutes, the tea boiler will start working again.
Light does not shine:
a. Whether the power was cut off?
b. Is the power cord plugged into the outlet?
c. Is the power outlet off?
Note : After analysis of the above phenomenon can not be ruled out or other failures, please contact the company’s maintenance or dealers. Non- professionals are not allowed to disassemble the machine.