AV Access 8KSW21-KVM 2×1 8K HDMI 2.1 Switcher with KVM User Manual

AV Access 8KSW21-KVM 2×1 8K HDMI 2.1 Switcher with KVM

Overview

This product is an 2×1 8K KVM switcher. It is able to share multiple USB 3.0 devices (such as USB camera, speakerphone or other conference devices) between two sets of HDMI 2.1 input ports and USB-B ports. It supports resolutions up to 8K@60Hz 4:2:0 10bit and 4K@120Hz 10bit in FRL mode, and up to 10K@120Hz 4:2:0 12bit in DSC mode. The switcher is also compatible with latest HDCP 2.3. It also supports front panel button switching and Hotkey switching (the USB keyboard must be connected to USB 1.1 port).

Features

•  New HDMI 2.1 2×1 KVM Switch.
• HDMI 2.1 standard with 40Gbps FRL and 18Gbps TMDS dual mode support.
• 2×1 KVM switch with two sets of HDMI 2.1 + USB 3.0 inputs/outputs.
• Supports 8K@60Hz, 4K@144Hz and 4K@120Hz uncompressed resolution, and 10K@120Hz, 8K@120Hz with DSC compressed resolution.
• Supports all HDR formats, such as HDR 10, HLG, HDR 10+ and Dolby Vision.
• HDMI 2.1 new feature support, including VRR, FVA, ALLM etc.
•  Supports EDID emulation at 4K@60Hz and below resolution.
• Supports multiple USB peripheral ports, including 4 x USB 3.0 device ports, 1 x USB 1.1 keyboard (hotkey) port.
• Supports 1 x 3.5mm TRRS headset (Mic in + stereo out) port, and following input source selection.
• Supports button switch and hotkey switch (Keyboard must be connected to USB 1.1 port).
• Supports automatic wake-up of the selected computer when switching.
• Supports CEC trigger on HDMI output.
• Support firmware upgrade through Micro USB port.

Package Contents

•  Switcher x 1
• DC 12V Power Adapter x 1
•  HDMI Cable x 2
• USB 3.0 Type-B to USB Type-A Cable x 2
• Mounting Brackets (with Screws) x 2
• User Manual x 1

Panel

Front Panel

Off: The device is powered off.

2

| HDMI Input Select (Button and LEDs)| Button: Press the button to select input source for output between HDMI In 1&2.

LEDs (1&2) are located on the left of the button. On: The corresponding input source is selected.

Off: The corresponding input source is not selected.

3| Headset| 3.5mm TRRS headset (Mic in + stereo out) port. Connect to a headset with mic.

It will follow the selected source to connect.

4| USB 3.0| USB type-A ports. Connect to USB devices such as

USB camera, USB speakerphone.

5| USB 1.1| Connect to USB keyboard. It can be used for hotkey

function.

Rear Panel

through this port.

3| HDMI Out| Connect to an HDMI display.
4| HDMI         In

(1&2)

| Connect to HDMI sources.
5| USB 3.0| USB type-A ports. Connect to USB devices such

as USB camera, USB speakerphone.

4

|

USB       Host (1&2)

| USB Type-B port. Connect to a USB host device. USB Host 1 and 2 are bound with HDMI In 1 and 2 separately. When select HDMI In 1/2 as input source, the connected USB slave devices will be

connected to USB Host 1/2.

Installation and Application

Brackets Installation
Note: Before installation, please ensure the device is disconnected from the power source.

1. Attach the installation bracket to the back panel using the screws provided in the package separately. As shown in the figure.
2. Attach the brackets to the surface you want to hold the unit against using the screws (provided by others).

Application

Hotkey Function

One USB 1.1 port on front panel of the switcher supports keyboard Hotkey function. Supported Hotkey: Tab (default)/Left Ctrl/Right Ctrl/Caps Lock

For example:
If you want to use the “Left Ctrl” as a hotkey, press the “Left Ctrl” key twice quickly to switch the hotkey to it, and other hotkeys are invalid. If you need to use other hotkeys, please repeat the above steps.
Note: When switch to the PC in standby mode, click the hotkey of the connected keyboard can wake up this PC.

Specifications

Technical

Input / Output

Signal Type

| Up to 8K@60Hz 4:2:0 10bit in FRL mode and up to

10K@120Hz 4:2:0 12bit in DSC mode, HDCP 2.3

Input / Output Resolution

| VESA:

800 x 6006, 1024 x 7686, 1280 x 7686, 1280 x 8006, 1280

x 9606, 1280 x 10246, 1360 x 7686, 1366 x 7686, 1440 x

9006, 1600 x 9006, 1600 x 12006, 1680 x 10506, 1920 x

12006,  2048  x  11526,  2560  x  14406,7,8,9,10,  3440  x

14406,7,8,9,10

CTA:

1280x720P5,6, 1920x1080P1,2,3,4,5,6,7,8,9,10,11,

3840x2160P1,2,3,4,5,6,7,8, 4096x2160P1,2,3,4,5,6,7,8,

5120×28801,2,3,5,6,8,7680×43201,2,3,5,6,7,8,

10240 x 4320P1,2,3,4,5,6,7,8

1 = at 24 (23.98) Hz, 2 = at 25 Hz, 3 = at 30 (29.97) Hz,

4 = at 48 Hz, 5 = at 50 Hz, 6 = 60 (59.94) Hz, 7 = at

100Hz,

8 = at 120Hz, 9 = 144Hz, 10 = 165Hz, 11 = 240Hz.

Note: Resolutions beyond 8K@60Hz require both the source and display device to support DSC 1.2

compression.

Maximum

Data Rate

| FRL Mode: 40Gbps

TMDS Mode: 18Gbps

Audio Format

| HDMI In/Out: Fully supports audio formats in HDMI 2.0 specification, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X

Headset: Stereo

General

Operating

Temperature

| 32°F to 113°F (0°C to 45°C)
Storage Temperature| -4°F to 158°F (-20°C to 70°C)
Humidity| 10% to 90%, non-condensing
ESD Protection| Human-body Model:

±8kV (Air-gap discharge)/

Dimensions (W x H x

D)

| 140mmx42mmx80.2mm/5.51”x1.65”x3.16”
Product Weight| 0.45kg/0.99lb

Transmission Distance

HDMI 2.0

| Input/Output:

15m/49ft

| 1080P@60Hz
Input/Output:

10m/33ft

| 4K@30Hz 4:4:4 24bpp
Input/Output: 5m/16ft| 4K@60Hz 4:4:4 24bpp

HDMI 2.1

| ****

Input/Output: 5m/16ft (Ultra High Speed HDMI Cable)

| 4K@120Hz 4:4:4 30bpp

5K@120Hz 4:2:2 36bpp

8K@60Hz 4:2:0 30bpp

8K@120Hz 4:2:2 36bpp (DSC)

10K@120Hz     4:2:0     36bpp

(DSC)

Warranty

Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable.

1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
4. The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but not covered by normal contract.
6. AV Access Technology Limited preserves the right for interpretation of these cases above and to make changes to them at any time without notice.

Thank you for choosing products from AV Access.
If you have any question, please contact us via the following emails: General Enquiry: info@avaccess.com
Customer/Technical Support: support@avaccess.com
Web site at: www.avaccess.com

References

• AV Access | Quality & Budget Assured Pro AV Product Manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>