SEI ROBOTICS FUSE 4K 2X2 Stick Android TV Streamer User Guide

SEI ROBOTICS FUSE 4K 2X2 Stick Android TV Streamer User Guide

What in The Box

1. Digital Box
   

2. Remote Control
   

3. Power Adapter

4. Battery

5. Quick Guide

DEVICE INFORMATION

1. HDMI
   

2. DC 5V
   

SETUP DIAGRAM

Router / Modem

REMOTE CONTRO

Pairing Guide
To activate pairing function press and hold + buttons pointing the remote to your digital box until the LED is fixed in red .

ANDROID TV

Complete the on-screen setup
Follow the on-screen instructions using your remote to navigate through the setup process.

TiVe, powered by Android TVTm, brings a world of content to your biggest screen. With the voice commands, you can quickly access entertainment and find the latest blockbuster. Just press the mic button on your remote to get started.

SPECIFICATIONS

Hardware

Chipset| Amlogic S905Y4-B
RAM| 2GB
Flash| 8GB
Video
Video Decod.r __.| Avl MP-I OffiL5.1 up to 4r,x2Ke6OlpsVP9 Profile-2 up fo 4Kx2K460fps-4 265 HEVC MP-10415.1 up to 4Kx2lat6Ofps’‘ VS2-P2 profile up to 4Kx2r4360tps-.264 AVC HPfiLL5.1 up lo 41(x2Kr330IpsH 264 MVC up to 1080K3601ps’. tPEG-4 ASPUL5 up to 1080P60fps (1S0-14496] ilMVNC-1 SP/MP/AP up to I OSOP460fps’‘ VS-P I6(AVS+) /AV S-P2 JiZbun Profile up to 1080P060Ips ‘, +PEG-2 MP/HL up to 1080Pa601ps (ISO-13918)’, sPEG-1 mP/Ht. up to 1080P460Ips (ISO-I 1172) eolVdeo 8/9/10 up to 108012,a,601ps
Video File Format| Support 4.mkv, 4,wmy, ‘.mpg, “.mpeg, ‘.dat, .avi. .mov, ‘is°, .mp4, ‘.rm. “.jpg, •.brnp, *.gif
Video Output| HDMI 2.1, HDCP2.2
Aspect Ratio| Auto, Full Screen
Video Resolution| 4k. 1080p/i, 720p
HDR| HDRIO
Audio
Audio Decoding| mEPG.AACHE-AAC, OGG, OGA. FLAC, ALAC, Ape, m4A.RM,MPEG-1 layer1/2. MPEG-2 Layer II, Dolby Digital/Digital Plus
Audio Mode| mono/Stereo
Power
DC Input Range| 5V/1.0
Power Consumption| Maximum 5 W

LEGAL NOTICES

IC regulatory conformance
This device complies with CAN ICES-003 (B)/NMB-003(B).
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Legal Notices

Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.

HDMI is a trademark or registered trademark of HDMI Licensing LLC in the United States and other countries.

Any use of this product in any manner other than personal use that complies with the MPEG-2 standard for encoding video information for packaged media is expressly prohibited without a license under applicable patents in the MPEG-2 patent portfolio, which license is available from MPG LA , 6312 . Fiddlers green circle suite 400E , greenwood village , colorado 80111 USA.

This product is licensed under the avc patent portfolio license for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the avc standard (“avc video”) and/or (ii) decode avc video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide avc video. no license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, L.L.C. SEE HTTP://[WWW.MPEGLA.COM](http://WWW.MPEGLA.COM)

Safety Instructions
Before you begin: Make sure all your equipment is turned off and the Evolution eSTREM4K Device is unplugged. The Evolution eSTREM4K Device is not designed to support any load. To ensure proper function, make sure that the device is not in an enclosed space, and do not place anything on top of the device. Safety information
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions of which you should be particularly aware. Please read these instructions before operating the equipment and save them for future reference.

1. Read Instructions: All the safety and operating instructions should be read and understood before the appliance is operated.

2. Retain Instructions: The safety and operating instructions should be retained for future reference.

3. Heed Warnings:  All warnings on the appliance and in the operating instructions should be followed.

4. Follow Instructions:   All operating and use instructions should be followed.

5. Water and Moisture: The appliance should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, etc.

6. Tlit/Stability:   All televisions must comply with recommended international global safety standards for tilt and stability properties of their cabinet design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product. Also, do not endanger yourself, or children, by placing electronic equipment/toys on top of the cabinet. Such items could unexpectedly fall from the top of the set and cause product damage and/or personal injury.

7. Ventilation: The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block air flow across the device.

8. Heat – The appliance should be situated away from heat sources such as radiators, heat registers. stoves, or other appliances (including amplifiers) that produce heat.

9. Power Cord Protection – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.

10. Object and Liquid Entry – Never push objects of any kind into this product through cabinet slots, as they may touch dangerous voltage points or short the parts, resulting in the risk of re or electric shock. Never spill liquid of any kind on this product.

11. Damage Requiring Service – The appliance should be serviced by qualified service personnel when:
    A. The power supply cord or plug is damaged or frayed; B. Liquid has spilled into the product;
    C. The product has been exposed to rain or water;
    D. The product does not operate normally when you follow the operating instructions (adjust only those controls that are discussed in this guide, as improper adjustment of other controls may result in damage, often requiring extensive work by a qualified technician to restore the product to normal performance);
    E. The product has been dropped or the cabinet damaged; F. The product exhibits a distinct change in performance.

12. Servicing – The user should not attempt service to the appliance beyond that described in the Troubleshooting section of this guide. All other servicing should be referred to qualified service personnel.

13. Cleaning — Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners; use a damp cloth for cleaning. If the product comes in contact with any liquid, unplug the power cord and let the unit dry thoroughly before plugging it back in.

14. Power Source — This product should be operated only from the type of power source indicated on the marking label or in this guide. If you are not sure of the type of power supply to your home, consult your dealer or local power company.

15. Overloaded Power Outlets — do not overload wall outlets and extension cords, as this can result in the risk of re or electric shock.

16. Electric Shock — To reduce the risk of electric shock, do not disassemble this product. Take it to a qualified service person when service or repair work is required. Opening or removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when this product is subsequently used.

17. Moving — Avoid moving the unit while it is plugged in to avoid accumulative shock.

FCC Information
Relevant safety and compliance information can be found at tivo.com/safety- compliance. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Port 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

FCC ID: 2A0VU-IPA3102HDW

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>