SEI ROBOTICS SN8BKC Power Adaptor User Manual
- June 8, 2024
- SEI ROBOTICS
Table of Contents
QUICK GUIDE
DEVICE INFORMATION
Setup
Complete the on-screen setup
Follow the on-screen instructions using your remote to navigate through the
setup process.
Powered by Android TV™
SPECIFICATION
Hardware
Chipset| Amologic 905Y4-B
RAM| 2GB
Flash| eMMC 8GB
Video
Video Decoding| AV1 MP-10@t5.1 up to 4Kx2K4)60fps
VP9 Profile-2 up to 4Kx2K@60fps
H.265 HEVC MP-10:415.1 up to 4Kx2K@60fps AVS2-P2 Profile up to 4Kx2K@60fps
H.264 AVC HP@L5.1 up to 4Kx2K@30fps H.264 MVC up to 1080P460fps
MPEG-4 ASP@L5 up to 1080P@60fps (ISO-14496) WMV/VC-1 SP/MP/AP up to
1080P460fps AVS-P16(AVS+) /AVS-P2 JiZhun Profile up to 1080P@60fps MPEG-2
MP/HL up to 1080P@60fps (150-13818)
MPEG-1 MP/HL up to 1080P@60fps (ISO-11172) Real Video 8/9/10 up to
1080PCsm6Ofps
Video File Format| Support .mkv, .wmv, .mpg, .mpeg, .dat, .avi, .mov,
.iso, .mp4, .rm, .jpg, .bmp, *.gif etc…
Video Output| HDMI 2.1 , HDCP2.2
Aspect Ratio| Auto, Full screen
Video Resolution| 480i/p, 576i/p, 720p, 1080i/p and 4Kx2K
Power
DC Input Range| 5V 1A
Power Consumption| Maximum 5W
SAFETY INFORMATION
NOTICE: To prevent fire and electric shock. do not expose this device to
rain or moisture. In order to avoid any possible risk of electric shock, never
attempt to open the unit. In case of the unit breaking down, repair of the
unit should be carried out by qualified technicians. No
CAUTION! part of this unit should be repaired by users.
WARNING!
- Protect the device from high temperatures, humidity, water and dust.
- Donot place any objects that might damage your unit near it (e.g. liquid filled objects or candies).
Google, Google Play, YouTube, Android TV and other marks are trademarks of
Google LLC.
Google Assistant is not available in certain languages and countries.
Access and Availability to this applications subject to terms and conditions.
Third party applications may require monthly subscription.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
Radiation Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm from your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>