Response RESP3-1WH Radiance 3 in 1 Bathroom HeaterExhaust Fan and Light User Manual

June 11, 2024
RESPONSE

Response logo

Response RESP3-1WH Radiance 3 in 1 Bathroom HeaterExhaust Fan and Light

Response-RESP3-1WH-Radiance-3-in-1-Bathroom-Heater-Exhaust-Fan-and-
Light

Product Information

Response Radiance 3 in 1 Bathroom Heater,Exhaust Fan & Light

The Response Radiance is a 3 in 1 bathroom unit that efficiently exhausts steam and odours, delivers instant heat, and provides effective lighting within the room. It has a modern and sleek design that seamlessly complements any bathroom or ensuite style. The unit is engineered to be lightweight, and it comes with a full function wireless wall controller that makes installation easy.
The grille can be rotated 90 degrees to better suit the shape of the room, and the spigot and ducting can remain parallel to ceiling joists to avoid kinks or sharp bends in duct.

Product Features

  • Quality AC motor with sealed-for-life bearings
  • Advanced impeller and housing design
  • Grille is easy to remove for cleaning
  • Removable 1 piece spigot Non-return backdraft damper
  • High-strength installation swing clips
  • IPX4 rated
  • Comes with a full-function wireless wall controller
  • 1-year warranty on Tungsten-Halogen heat globes (conditions apply)

Product Specifications

Model| Voltage| Hertz| Fan Power| Light Power| Heater Power| Noise Level dBA @ 3m| Air Flow L/sec High Speed| Air Flow L/sec Low Speed| Air Flow m3/hr High Speed| Air Flow m3/hr Low Speed| Light Lumens| Light Colour Temperature| IP Rating
---|---|---|---|---|---|---|---|---|---|---|---|---|---
RESP3-1WH| 230-240V| 50| 40W| 24W| 2 x 500W| 37 dBA @ 3m (High Speed), 27 dBA @ 3m (Low Speed)| 87 L/sec (High Speed), 30 L/sec (Low Speed)| 313 L/sec (High Speed), 108 L/sec (Low Speed)| 1560 m3/hr (High Speed), 540 m3/hr (Low Speed)| 3000K/4200K/6000K| IPX4

Product Usage Instructions

  1. Ensure that the electricity supply to the bathroom is turned off before installing the unit.
  2. Remove the old exhaust fan and light fixture, if applicable.
  3. Install the Response Radiance unit by following the installation instructions provided in the manual.
  4. Connect the unit to the electricity supply and turn it on.
  5. Use the wireless wall controller to adjust the fan speed, heat settings, and light settings as desired.
  6. To clean the grille, remove it from the unit and wipe it down with a damp cloth. Allow it to dry before replacing it.
  7. For further information on the product warranty, refer to the installation and maintenance instructions provided in the manual or visit the manufacturer’s website.

Static Pressure Pa

Air flow is measured with grille installed

The Response Radiance with heater, exhaust fan and light sets a new benchmark for 3 in 1 bathroom units. Its modern and sleek design will seamlessly compliment any bathroom or ensuite style. It has been engineered to efficiently exhaust steam and odours, deliver instant heat,and provide effective lighting within the room. Its unique design, lightweight construction and full-function wireless wall controller, make the Response Radiance easy to install into established or new homes.

FAN DIMENSIONS

CONTROLLER DIMENSIONS

All dimensions in mm

  • Designed and engineered for fast and efficient installation.
  • Modern contemporary design.
  • Wireless wall controller activates all operating functions.
  • Tungsten-Halogen heat globes provide instant heating.
  • LED lights can be set to cool, neutral or warm white to match other installed lights.
  • Equipped with non-return backdraft damper.
  • Made from ABS for a tough but light-weight design.
  • Fitted with plug and lead.
  • Grille can be easily removed for cleaning.

Response-RESP3-1WH-Radiance-3-in-1-Bathroom-Heater-Exhaust-Fan-and-
Light-4

Response-RESP3-1WH-Radiance-3-in-1-Bathroom-Heater-Exhaust-Fan-and-
Light-7

Air flow is measured free air with grille installed.
† On 4200K light colour temperature.

Response-RESP3-1WH-Radiance-3-in-1-Bathroom-Heater-Exhaust-Fan-and-
Light-8

Colour indicated in drawings above is for illustrative purposes only.

ENGINEERED TO COMPLIMENT ROOM SHAPE

Grille can be rotated 90 degrees so the alignment of LED lights and heat lamps can better suit shape of the room.
This enables spigot and ducting to remain parallel to ceiling joists and avoid kinks or sharp bends in duct.

Conditions apply. 1 year warranty on the Tungsten-Halogen heat globes.
Visit our website or see installation and maintenance instructions for further information.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

RESPONSE User Manuals

Related Manuals