Honeywell ATF600 Evotouch Wall Mounted Dock Installation Guide
- May 15, 2024
- Honeywell
Table of Contents
Honeywell ATF600 Evotouch Wall Mounted Dock
Product Specifications
- Product Name: evotouch WALL MOUNTED DOCK ATF600
- Country of Origin: UK
- Model Number: 50042754-001 C
- Power Supply: 230V~
- Minimum Depth Required: 40 mm
Product Usage Instructions
Installation :
- Secure the wall plate to the wall box or wall.
- For wall installation in Italy, purchase the ATF300 power supply accessory.
- Ensure power supply is isolated and safe before wiring to prevent electric shock and damage.
- Installation should be done by a competent person.
- Insert wires into the power module, observing correct polarity.
- Push the power module into the wall box with mains wiring to the rear.
- The power supply can be installed separately from the evotouch unit.
Usage:
- Mount the wall box at a minimum height of 1.2 m.
- Place the power supply in the wall box with the power cord at the back.
- Push the divider in the wall box to separate high and low voltage.
Frequently Asked Questions (FAQ)
Q: Can the power supply be installed in a different location from the
evotouch unit?
A: Yes, the power supply can be installed separately. Ensure correct polarity
(Red for +, Black for -).
evotouch
WALL MOUNTED DOCK ATF600
INSTALLATION
For more information see installation manual for evotouch.
- Position wall box at a height of min. 1.2 m.
- Caution: Isolate power supply and make safe before wiring the unit to prevent electric shock and equipment damage. Installation should be carried out by a competent person.
- Minimum depth 40 mm
- Insert wires into power module, observing correct polarity.
- Push power module into wallbox with mains wiring to the rear.
- The power supply can be installed in a different location from the evotouch unit.
- Observe correct polarity Red (+), Black (-). X Y not used.
- Cable length:
- max. 5 m 0.5 mm²
- max. 10 m 1.0 mm²
- Attach wallplate to wall box or surface (power module remote).
Pittway Sarl, Z.A. La Pièce 4, 1180 Rolle, Switzerland
Country of origin : UK
© 2020 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell
International Inc. This product is manufactured by Resideo Technologies, Inc.
and its affiliates.
www.resideo.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>