EarthConnect ECHBPIR1 Linear High Bay Sensor Owner’s Manual
- June 11, 2024
- EarthConnect
Table of Contents
EarthConnect ECHBPIR1 Linear High Bay Sensor
Product Information
The Linear Highbay Sensor/Controller/Node with model number ECHBPIR1 is a device designed for use in commercial or industrial settings. It is a 120/277VAC device that comes with a built-in PIR sensor for motion detection. The device is manufactured by EarthTronics, Inc., a company based in Norton Shores, MI.
WARNING
Please note that installation of this device requires the services of a
licensed electrician. Before installing the Linear Highbay
Sensor/Controller/Node, please ensure that the power is turned off at the
circuit breaker.
Product Usage Instructions
- Download the EarthConnect App from the app store
- Follow the instructions provided in the app to connect to the Linear Highbay Sensor/Controller/Node
- Once connected, you can use the app to configure and control the device
- The built-in PIR sensor detects motion and can be used to trigger the lights connected to the device
- The Linear Highbay Sensor/Controller/Node can also be used as a wireless node in a larger network of devices
If you have any questions or concerns regarding the installation or usage of this device, please contact EarthTronics, Inc. at 866.632.7840 or email them at contact@earthtronics.com.
| Document | Instructions |
|---|---|
| Rev. Date | 4.20.2023 |
| Order Code | 11805 |
| Model # | ECHBPIR1 |
Linear Highbay Sensor/ Controller/ Node
120/277VAC with built-in PIR Sensor
WARNING
Please consult a licensed electrician for installation. Turn off the power at
circuit breaker before installing the unit.
PRODUCT FEATURES
- Drill 1/2″ KO in the sheet metal for ECHBPIR1 installation, make sure the ECHBPIR1 is fixed in the luminaire.
- Screw in the sensor into the receptacle and make sure the connection is tight. Ensure the rubber gasket touches the outside surface of the fixture.
- Attach the lens to sensor and turn the lens module clockwise to ensure it locks in place.
- Please refer to the diagram below for wiring.
- Return power back to source.
- Commissioned the sensor via EarthConnect App.
PRODUCT WIRIING
Download the EarthConnect App
Download the app instructions
LEARN MORE: EarthConnect
www.earthtronics.com/earthconnect
EarthTronics, Inc. | Norton Shores, MI 49441
www.earthtronics.com
Email: contact@earthtronics.com
Toll Free: 866.632.7840