EarthConnect ECPPFC1 Hardwire Low Bay Controller Owner’s Manual
- June 11, 2024
- EarthConnect
Table of Contents
ECPPFC1 Hardwire Low Bay Controller
Product Information
The Hardwire Low Bay Controller is a product designed to control the LED Vapor and LED Strips through a 12V Power Pack with a 10A Relay. The product comes with an Order Code of 11800 and a Model # of ECPPFC1. It is manufactured by EarthTronics, Inc. and the latest revision date of the instructions is 4.24.2023.
The product is equipped with a warning that advises users to consult a licensed electrician for installation and turn off the power at the circuit breaker before installing the unit.
Users are required to download the EarthConnect app to use this product. Instructions on how to download the app can be found in the instructions manual or by visiting www.earthtronics.com/earthconnect.
For any inquiries or concerns, customers can contact EarthTronics, Inc. through email at contact@earthtronics.com or through their toll-free number 866.632.7840.
Product Usage Instructions
- Consult a licensed electrician for installation and turn off the power at the circuit breaker before installing the unit.
- Download the EarthConnect app on your smart device.
- Follow the instructions provided in the app to connect to the Hardwire Low Bay Controller.
- Once connected, you can use the app to control the LED Vapor and LED Strips through the 12V Power Pack with a 10A Relay.
- If you encounter any issues or have any concerns, contact EarthTronics, Inc. through email at contact@earthtronics.com or through their toll-free number 866.632.7840.
Hardwire Low Bay Controller
LED Vapor & LED Strips – 12V Power Pack with 10A Relay
WARNING
Please consult a licensed electrician for installation. Turn off the power at
circuit breaker before installing the unit. 
FEATURES
- Please call a licensed electrician for installation.
- Drill 1/2″ KO in the sheet metal for ECPPFC1 installation, make sure the ECPPFC1 well fixed in the luminaire.
- Screw in the sensor into the receptacle and make sure the connection is tight. Ensure the rubber gasket touches the outside surface of the fixture.
- Attach the lens to sensor and turn the lens module clockwise to ensure it locks in place.
- Please refer below diagram for wiring.
- Return power back to source.
WIRIING
Download the EarthConnect App 
Download the app instructions
LEARN MORE: EarthConnect www.earthtronics.com/earthconnect
EarthTronics, Inc. | Norton Shores, MI 49441 | www.earthtronics.com | Email: contact@earthtronics.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>