JLL RE500 Monitor Instruction Manual

JLL RE500 Monitor

Product Information: RE500 Monitor

The RE500 Monitor is an electronic device used to monitor the user’s workout progress while using a JLL Fitness machine. It has a total of six readouts, including time, speed, distance, heart rate, calories, and odometer. The monitor has been tested to meet the required standards and conforms to relevant EU directives for health, safety, and environmental protection. The monitor comes with a user manual that includes safety precautions, cleaning instructions, installation instructions, operation instructions, data readouts, troubleshooting tips, and contact information.

Product Usage Instructions

Safety Precautions
Before using the RE500 Monitor, please read and follow the safety precautions mentioned in the user manual. The monitor has been tested to meet the required standards and conforms to relevant EU directives for health, safety, and environmental protection. The  following symbols indicate the passed regulations: WEEE (Waste Electrical and Electronic Equipment Recycling), ABS (Acrylonitrile Butadiene Styrene), CE (Conformité Européene), QC Pass (Quality Control Pass), and ROHS (Restriction of Hazardous Substances).

Cleaning

When cleaning the monitor, use a soft dry cloth to prevent scratching the LCD screen. Do not spray cleaning chemicals directly onto the monitor and do not apply water to the monitor as it is electrical and may damage the internal components.

Installation

1. Insert the batteries, making sure they are the correct way round.
2. Remove the four screws from the back of the monitor.
3. Connect the male to female wires from the base to the monitor.
4. Secure the monitor to the base using the four previously removed screws.

Operation

When first powered on, the monitor will automatically be in `Scan’ mode. This means the digits in the largest segment on the screen will change every few seconds between time, distance, speed, etc. This allows for an overview while training without pressing any buttons. When the machine is in use, a cycling icon will appear in the top left corner. When you stop exercising, the icon will disappear.

Exiting Scan Mode
To exit scan mode, press `MODE’ and continuously press it to view each readout. If you are within scan mode, there will be a scan icon in the bottom left to indicate this.

Setting Target Programs
Digits begin to change when setting target programs.

Resetting Your Monitor
Press and hold the `RESET’ button until all the digits come up and return to zero.

Data Readouts

Troubleshoot

correctly.
No pulse reading| Ensure the heart rate chest strap is connected correctly and
positioned correctly.

Contact Details

• Tel: 0121 328 7507
• Email: info@jllfitness.co.uk
• Live Chat: WWW.JLLFITNESS.CO.UK

@JLLFITNESS

COPYRIGHT
The contents of this manual are subject to change without notice to improve quality.
© 2023 JLL Fitness Ltd
JLL Fitness Ltd owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of JLL Fitness Ltd is prohibited.

SAFETY

The monitor on this machine has been tested to the required standards, each of those passed regulations are shown via the following symbols:

• WEEE – Waste Electrical and Electronic Equipment Recycling.

• ABS – Acrylonitrile Butadiene Styrene often referred to as ABS is a type of plastic that is an opaque thermoplastic.

• CE – The product conforms with relevant EU directives regarding health and safety or environmental protection.

• QC Pass – A product which has fulfilled the requirements of a technical control and passed the outgoing exams.

• ROHS – This is an abbreviation for “Restriction of (the use of certain) Hazardous Substances in electrical and electronic Equipment”. ABS

• WEEE Symbol

• EU Compliance Symbol

• ABS Recycling Symbol

• Quality Control Symbol

• ROHS Symbol

PRODUCT CLEANING

Please take care when cleaning this monitor as the LCD screen can easily be scratched.

• You will need a soft dry cloth

• Do not spray cleaning chemicals directly onto the monitor

• Do not apply water to the monitor as it is electrical and may damage the internal components

PRODUCT INSTALLATION

• STEP 1
  Insert the batteries, making sure they are the correct way round.
  

• STEP 2
  Remove the four screws from the back of the monitor.
  

• STEP 3
  Connect the male to female wires from the base to the monitor.

• STEP 4
  Secure the monitor to the base using the four screws previously removed.
  

PRODUCT OPERATION

The RE500 monitor has a total of 6 readouts, displaying:
Time Speed Distance Heart Rate Calories Odometer
When first powered on, the monitor will automatically be in ‘Scan’ mode. This means the digits in the largest segment on the screen will change every few seconds between time, distance, speed etc. This will allow you to have an overview while training without pressing any buttons. When the machine is in use you will also see a cycling icon in the top left corner, when you stop exercising the icon will disappear.

EXITING SCAN MODE
Press ‘MODE’ to exit scan mode and continuously press it to view each readout. If you are within scan mode, there will be a scan icon in the bottom left to indicate this.

SETTING TARGET PROGRAMS
On this monitor your are able to set a target time, distance, pulse and calories.

• Start by pressing ‘MODE’ until your chosen setting flashes.
• Then press ‘SET’ to change the digits to your desired target.
• Once set, begin your workout by pedalling and you will see the digits begin to change.

RESETTING YOUR MONITOR
Press and hold the ‘RESET’ button until all the digits come up and return to zero,

 Product Data Readouts

 Product Troubleshoot

• Make sure the batteries are fully inserted and the correct way round.
• Check your connection wires from the monitor to the base. They must not be trapped, fully connected and the pins must be straight.

No pulse reading|

• Make sure the pulse plates are clean and
• dry.
• Do not have any lotion on your hands.
• Sweat can affect the reading.
• Make sure both hands are fully gripping

each plate.

Contact Details

• Tel: 0121 328 7507
• Email: info@jllfitness.co.uk
• Live Chat: WWW.JLLFITNESS.CO.UK

References

• JLL Fitness®: Buy Gym & Fitness Equipent Online (Official)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>