ENGLEFIELD 99230A-0S01-DW Valencia Elite Vanity Tops Instruction Manual
- June 4, 2024
- ENGLEFIELD
Table of Contents
ENGLEFIELD 99230A-0S01-DW Valencia Elite Vanity Tops
INSTALLATION
NB: Please refer to the instructions provided with the vanity cabinet to set up the carcass and drawers.
(a) Unpack the top and check for any damage that might have occurred in
transit. Check and confirm the fit of your selected basin and tapware.
(b) Apply a continuous bead of silicone (not supplied) to the top edges
of the cabinet. Ensure there are no gaps in the bead. This will ensure the top
stays securely fitted to the cabinet and no water spillage will find its way
into the cabinet.
(c) Place the vanity top onto the cabinet, ensuring that the polished side is facing up and the tap hole (if present) is in the correct position. Check that the back is flush against the wall and there is an even overhang on either side of the cabinet. Wipe off any excess sealant.
(d) Carefully fit the tapware and connect it to the water supply.
(e) Fit the basin and waste, then connect the waste pipe to the outlet.
Ensure that the water supply and waste assembly do not interfere with the
operation of drawers.
(f) Run hot and cold water and check for leaks. Make repairs as required.
(g) Seal all edges with silicone sealant:
- Between cabinet and floor
- Between cabinet and wall
- Between vanity top and basin
- Between vanity top and wall(s)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>