STIRLING STR-CD50 Washing Machine User Guide
- June 9, 2024
- STIRLING
Table of Contents
Quick Start Guide
Model: STR-CD50
Let’s get your new 5 kg vented
clothes dryer ready to use!
A Installing the machine
CAUTION! This clothes dryer is heavy – ensure you have a helper to move
and install it. Move cautiously when moving the dryer. Do not attempt to lift
it by grasping the door. A team lift or mechanical aid is required when moving
it.
WHERE TO INSTALL? This clothes dryer is designed with the control panel
low on the front panel so it is in easy reach when wall-mounted. If you want
to wall-mount it upside down, use the extra control panel (supplied) so the
printing is the right way up. The dryer is equally suitable for installation
on the floor level, or mounted on a rack (rack not included). Comprehensive
instructions for all installation options are included in the instruction
manual.
CAUTION! Your wall must be structurally sound and sturdy enough to
support the weight of the dryer with a full load (40 kg). If in doubt, consult
a builder.
NOTE: Before you use the dryer for the first time, place some clean, damp
rags into the drum and run a complete cycle on the 1 Hour program following
the instructions on page 18 in the manual.
B Preparation
-
Plug in the machine.
-
Load your washing into the dryer
– page 17 in the instruction manual has useful hints to help you with this. -
Close the door.
C Clothes Drying
4a For the Smart program, simply press the POWER button, then the
START/PAUSE button.
4b For the Extra program, press the POWER button, then the PROGRAM button
until the Extra indicator lights up, then press START/PAUSE.
4c For the 1 Hour program, press the POWER button, then the PROGRAM
button until the 1 Hour indicator lights up, then press the TEMPERATURE button
and select an appropriate temperature, then press START/PAUSE.
D Afterwards
5. At the end of the drying program, when the drum has stopped rotating,
unplug the machine from the power supply.
6. Open the door and take out your washing.
7. When the drum has cooled, take out the lint filter assembly, disassemble
it and clean each part.
8. Reinstall the lint filter assembly, first the exhaust filter and then the
lint filter attached to the exhaust vent shroud.
E Control panel
F Programs
Extra: A temperature-sensing program suitable for fast drying of textiles
that can withstand high heat (60°C).
Maximum drying time: 150 minutes. Temperature cannot be adjusted.
Smart: A temperature-sensing program suitable for drying textiles at a
slightly lower temperature (55°C).
Maximum drying time: 150 minutes. Temperature cannot be adjusted.
1 Hour: This one hour program is suitable for smaller loads of clothing.
The drying temperature can be set to 60°C, 40°C or Airing, which simply
refreshes clothes without heat.
Give us a call
What? You mean this Quick Start Guide didn’t have ALL the answers? The
manual has more comprehensive instructions, or speak to us. Call our After
Sales Support on 1300 112 534.
Well done, you made it!
Now sit back and relax … your new clothes dryer is
automatically covered by a 3 year warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>