bright starts 12892-MEWS 2-in-1 Ball Play Walker Instruction Manual
- June 9, 2024
- bright starts
Table of Contents
12892-MEWS 2-in-1 Ball Play Walker
Instruction Manual
2-in-1 Ball Play Walker
IMPORTANT! KEEP FOR FUTURE REFERENCE.
WARNING
To Prevent Serious Injury or Death:
- Use only under adult supervision. Never leave the child unattended
- STAIR HAZARD: Avoid serious injury or death. Block stairs/steps securely before using the activity walker
- Use only on flat surfaces free of objects that could cause the activity walker to tip over
- For indoor use only.
Fall Hazard:
- A child’s movement can slide the product.
- Never place the product on countertops, tables, on or near steps or on other elevated surfaces.
- Always use on the floor.
CAUTION Adult assembly required.
IMPORTANT
- Please read all instructions before assembly and use of the product.
- Care should be taken in unpacking and assembly.
- Examine product frequently for damaged, missing, or loose parts.
- DO NOT use if any parts are missing, damaged, or broken.
- Do not use replacement parts other than those approved by the manufacturer.
Assembly Instructions
Battery Installation
not included Battery Information
2 -in-1 Ball Play Walker requires three (3) size AA/LR6 (1.5V) alkaline
batteries (not included).
CAUTION: Follow the battery guidelines in this section. Otherwise,
battery life may be shortened or the batteries may leak or rupture.
- Always keep batteries away from children.
- Do not mix old and new batteries.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Install the batteries so that the polarity of each one matches the markings in the battery compartment.
- Do not short-circuit the batteries.
- Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
- Remove exhausted batteries from the battery compartment.
- Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
- Please use the correct disposal method for batteries.
- Remove batteries before putting the product into storage for a prolonged period of time.
- Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
- Do not dispose of product or batteries in fire, batteries may explode or leak.
** This symbol indicates that the product is not to be disposed of in
household waste as batteries contain substances that can be damaging to the
environment and health. Contact local authority for recycling & collection
information.
Cleaning Instructions
Clean before use with a damp cloth and mild soap. Air dry. Do not immerse
in water.
FCC Statement / CAN ICES-3 (B) / NMB-3(B)
** This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Find us on Facebook and Instagram @brightstarts
Toys Jousts
brightstarts.com
MANUFACTURED FOR
©2022 KIDS2, INC. www.kids2.com/help
KIDS2, INC. ATLANTA, GA USA 30305
1-800-230-8190
KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154
(02) 9894 -1855
KIDS2 SHANGHAI LIMITED Room7401, Shanghai Tower, No.479 Lujiazui Ring Road ,
Pudong New Area,
Shanghai 200120
+86 21 31025990
KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuyaku, Tokyo,
Japan 150-0013
(03) 5322-6081
KIDS2 UK LTD. 725 CAPABILITY GREEN, LUTON, BEDFORDSHIRE, UK, LU1 3LU
+44 01582 816 080
KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS
+31 20 2410934
KIDS2 US MÉXICO S.A. DE C.V.
(55) 5292 – 8488
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>