ARKROCKET AR-PH68 Cassini Turntable Instruction Manual
- June 9, 2024
- ARKROCKET
Table of Contents
ARKROCKET AR-PH68 Cassini Turntable Instruction Manual
1. Safety Instructions
Read and understand this entire manual before using this product. Keep these instructions for future reference.
- Do not use this product near water.
- This product should be operated only by the type of power source indicated on the marking label or in this instruction manual.
- Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet try reversing the plug. If the plug should still fail to fit, contact your electrician.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.
- Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
- Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
- Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
- Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Do not use attachments not recommended by the product manufacturer as they may cause hazards.
- A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
- Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block or cover these openings.
- Unplug the product during lightning storm or when unused for long periods of time.
2. Product overview
2.1 Top view
2.2 Back View
3. Setting Up Your Turntable
You need to install the turntable before you can use it.
- Take the accessories out of the packing case and check that the accessories are in complete and good condition
- Install the metal platter(the belt is pre-installed on the bottom of the metal platter) and a turntable mat on the metal platter.
- Install dust cover.
- Attach and adjust the counterweight.
- Carefully remover the tape. Too much force will damage the cover and stylus.
Installing the platter and turntable mat
Note: The belt is pre-installed on the bottom of the metal platter.
2. Still holding the belt, flip the platter over, then insert the platter
onto the spindle in the center of your turntable.
3. Align the round hole in the platter with the pulley and use your finger to
hook the belt onto the pulley.
4. Place the turntable mat on the platter.
Note: When you want to take out the platter from the turntable, remove the mat
first, then grasp the platter and pull it upward. This is especially important
if you are shipping your turntable to prevent the platter from shaking.
Installing the Lid
Insert the hinge pockets of the lid onto the hinges of the turntable
Cartridge Tracking Force Adjustment
Note: Each mark on the scale represents 0.1g. The recommended tracking force for the When”3.5”is cantered over the black line on the top of the tonearm please stop.
4. Playing a Record
4.1.Before playing a record
1.1 Pull the protector straight forward to remove it.
NOTE: Applying a downward force may cause the Protector
1.2 Place the record on the felt mat so that the center hole aligns with the spindle
4.2. Turntable Operation
Sufficiently lower the volume of the amplifier and speakers first
2.1 Connect the include power adapter to the turntable, Turn on the power knob
and select Phone mode.
2.2 Remove the stylus protector form the stylus
2.3 Place the record on the slip mat. ing to the type of record.
2.4 Press the Speed Selector button to switch between 33 and 45 RPM speeds
according to the type of record.
2.5 Unlock the tonearm clip and set the tonearm lift lever to the up positing.
2.6 Position the tonearm clip and set the tonearm lift over to the up
positing.
2.7 Carefully lower the tonearm on the record.
2.8 Turn up the volume of the turntable as needed.
2.9 When you are finished playing the recode, raise the tonearm, return it to
rest on the turntable
4.3 Bluetooth Operation
- Connect the included power adapter to the turntable and curn on power knob to BT mode the blue.
- Turn on the Bluetooth feature of your media device and search for and select” Ark rocker Cession” to pair the media device and turntable.
- Once your media device is successfully paired with the turntable, the turntable will play a short confirmation sound.
- Play and stream music from your media device to the turntable. The indicator light will Removing Needle become solid.
Note: Bluetooth version:5.1
4.4 Bluetooth Transmitter Operation
- Connect the included power adaptor to the turntable.
- Switch the record player on, then set the volume on both devices to low to begin with.
- Set the mode selection dial on the record player to PHONO to play
- Long press the button to begin the pairing process, the operation indicator light has been established.
- Play the music from the turntable to a media deride, If you wish to end playback, long Function.
4.5 AUX-IN Operation
Needle Replacement
Removing Needle
- Gently pull down the front edge of the needle.
- Pull needle forward.
- Pull out and remove.
Installing Needle
- Position the needle with its tip facing down.
- Line up the back of the needle with the cartridge.
- Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place.
5. Troubleshooting
6. Technical Specifications
Information on Waste Disposal for Consumers of Electrical & Electronic Equipment
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.