nVent HOFFMAN SSTB Terminal Box Instruction Manual
- June 9, 2024
- nVent HOFFMAN
Table of Contents
SSTB Terminal Box
Product Information
The product is an enclosure designed to protect electronic devices. It is important to note that when mounting the enclosure on or over a combustible surface, a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel extended at least 150 mm beyond the equipment on all sides must be installed. This is to prevent fire hazards.
Additionally, to maintain the environmental integrity of the enclosure, devices with the same environmental ratings shall be used to close openings in customized enclosure. This ensures that the enclosure remains safe and functional.
Product Usage Instructions
- Ensure that when mounting the enclosure, it is not on or over a combustible surface. If it is, install a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel extended at least 150 mm beyond the equipment on all sides.
- Only use devices with the same environmental ratings to close openings in customized enclosure. This will ensure that the enclosure remains safe and functional.
It is important to follow these instructions carefully to ensure proper usage and to prevent fire hazards or damage to the enclosure and electronic devices inside it.
Hardware
WARNING: When mounting on or over a combustible surface, a floor plate of
at least 1.43 mm galvanized or 1.6 mm uncoated steel extended at least 150 mm
beyond the equipment on all sides must be installed.
WARNING: In order to maintain the environmental integrity of the
enclosure, devices with the same environmental ratings shall be used to close
openings in customized enclosure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>