FRIGIDAIRE EFMIS55-B Beverage Center User Manual

EFMIS55-B Beverage Center
User Manual Beverage Center
USE & CARE

INTRODUCTION

Welcome to our Family
Thank you for bringing Frigidaire into your home! We see your purchase as the beginning of a long relationship together. This manual is your resource for the use and care of your product. Please read it before using your appliance. Keep it handy for quick reference. If something doesn’t seem right, the troubleshooting section will help you with common issues. FAQs, helpful tips and videos, cleaning products, and kitchen and home accessories are available at www.frigidaire.com.
Installation Checklist
Doors

• Handles are secure and tight
• Door seals completely to cabinet on all sides Leveling
• Cabinet is setting solid on all corners

Electrical Power

• House power turned on

Final Checks

• Shipping material removed

IMPORTANT SAFETY INFORMATION

WARNING
Please read all instructions before using this appliance.
Safety Definitions
This is the safety alert symbol. It is used to alert of potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result In minor or moderate injury.
IMPORTANT
IMPORTANT indicates installation, oper-I ation or maintenance information which is important but not hazard-related.
Child Safety
Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the beverage center is unpacked. Children should NEVER use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation.
Safety Instructions

• DO NOT store or use gasoline, or other flammable liquids in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other hazards.
• Remove all staples from the carton. Staples can cause severe cuts, and also destroy finishes if they come in contact with other appliances or furniture.

PARTS AND FEATURES

1. Adjustable Electronic Thermostat with Digital Display
2. LED Interior Light Control
3. LED Interior Light
4. Adjustable Tempered Glass Shelves
5. Adjustable Front Leveling Legs
6. Reversible Double Pane Glass Door with Stainless Steel Frame
7. Stainless Steel Handle

INSTALLING YOUR BEVERAGE CENTER

HANDLE INSTALLATION
TOOLS NEEDED: Phillips screwdriver #2.
IMPORTANT: NEVER LAY THE BEVERAGE CENTER ON ITS BACK.
The compressor and motor components are installed at the back of the unit and may easily be damaged if the beverage center is placed on its back.
IMPORTANT: DO NOT USE STAINLESS STEEL HANDLE TO MOVE OR LIFT THE UNIT.

1. The stainless steel handle is easily attached to the left side of the glass door with two enclosed screws.
   

2. Carefully pull back the gasket from the interior door frame as indicated. Insert screws into holes on back side of door under the door gasket. Position the handle on the outside of the glass door.

3. Tighten both screws until the door handle is flush with the stainless steel frame. Take care not to over tighten the screws, as this may damage the handle or frame.
   

4. Gently press and thread the gasket back into the solt on the door frame. Ensure the gasket is properly seated prior to using the unit.

DOOR REVERSAL INSTRUCTIONS
TOOLS NEEDED: Phillips screwdriver #2 or 5/16″ (8 mm) socket tool and thin flathead screwdriver. The beverage center is shipped with the door hinge brackets attached on the right side. The door may be reversed to allow opening from the left side.
If you plan on reversing the door hinges, DO NOT plug the beverage center into the power outlet. And the screwdriver is not included.
REMOVE GLASS SHELVES BEFORE REVERSING THE DOOR.
IMPORTANT: NEVER LAY THE BEVERAGE CENTER ON ITS BACK.
The compressor and motor components are installed at the back of the beverage center and may easily be damaged if the unit is placed on its back.

1. Gently remove the plastic hole insert plugs from the left side of the beverage center with a thin flathead screwdriver. Save the plugs for Step 11.
   

2. Loosen the triangular bracket cover by pushing the bracket cover towards the back of the beverage center and simultaneously pulling up.

3. Slide the cover towards the front of the beverage center and lift off.
   

4. Remove the metal bracket by unscrewing the three screws.

5. Lift and remove the door.
   

6. Rotate door 180° so that the handle is on the opposite side.

7. With the unit on its side, remove the bottom metal base bracket with nylon washer. Unscrew the axle insert with a flathead screwdriver. Screw into the opposite hole of the metal base bracket.
   

8. Gently place the beverage on opposite side to complete the door reversal. Remove screw and re-insert into the opposite side. Re-attach the metal base bracket with nylon washer on the new hinge side. Lift the unit to an upright position.
   7.a  To reattach the door, place the door onto the bottom axle insert. Place the top bracket into the door and align the metal bracket holes over the holes in the top of the unit cabinet. Tighten the three screws to hold in place.
   

9. The rubber gasket should be compressed on all sides of the door. If the gasket is more compressed on one side, the metal bracket position should be adjusted. Make sure the door is level. Once the door position is finalized, securely tighten the screws.

10. Reinstall the triangular bracket cover by carefully threading the bracket cover onto the metal bracket and pressing down.
    

11. Reinstall all plastic hole insert plugs. The re-installation of the plastic hole insert plugs is important to maintain the seal and integrity of the insulation. Extra inserts are included in case the plugs are damaged during removal.

IMPORTANT: It is extremely important to wait at least six hours before plugging the beverage center into a power outlet. During the door reversal process, the refrigerant and compressor oil fluids mixed. It is important to allow the refrigerant and compressor oil to separate and settle so the compressor operates properly. Failure to do so will cause severe mechanical problems, perhaps even the destruction of the unit’s motor/compressor, and will void the warranty.

Startup
Connect the power cord to a standard wall outlet. Do not use a GFCI outlet to connect the unit (see page 4). After connection, you will immediately hear a short beep. Temperature – Adjustable Thermostat Control
The default temperature is 43°F. Use the and buttons to set the desired temperature between the range of 40°F – 61°F.
The display will flash while the temperature is being set. After a few seconds, it will revert to its current internal temperature reading
The digital display r adinwill adjust as the unit cools. While the unit is adjusting to the new setting, press the  or buttons to view the selected temperature setting.
If there is a power outage, the unit will revert to the last temperature setting once power is restored.
Loading Beverages
When first loading the beverage center to full capacity, we recommend the following steps to effectively cool a large number of beverages.

1. Use the Adjustable Thermostat Control to set the temperature to 43°F (also the default temperature).
2. Mow the beverage center to cool for a minimum of two hours.
3. Load the beverages. To achieve maximum capacity, refer to the loading diagrams.
4. After initially filling with beverages, the internal temperature will rise as indicated on the display.
5. Once the beverage center has cooled the beverages to 43°F, use the Adjustable Thermostat Control to select a desired cooler internal temperature (lowest temperature setting is 40°F).
6. Allow several hours for the beverage center to cool to the desired lower temperature.
   Note: It is normal for temperature variances to occur inside the unit, and areas near the door will have slightly warmer temperatures.

LOADING DIAGRAM

Standard 12 Ounce Cans
The beverage center accommodates 126 beverages (standard 12 ounce cans). To accommodate all 126 beverages, position the glass shelves and load the beverages as shown:
Bottles
The beverage center accommodates a range of bottles, and the capacity varies depending on the position of the shelves and width of the bottles.
Nest the bottles to gain greater capacity: Other Beverages
The glass shelves can be adjusted to accommodate varying sizes of beverage cans and bottles depending upon storage needs.

DEFROSTING

LED LIGHT
Press the button to turn the LED light on and off. To enhance the lifespan of the LED light and conserve energy, it is recommended to predominantly utilize the light for loading and selecting beverages.
SHUTDOWN
If the beverage center will not be in use for a long period of time, disconnect it from the power outlet, clean inside thoroughly and leave the door open to prevent mildew.
SAFETY WARNING
The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. This beverage center should not be positioned within a recessed or enclosed cabinet. It is designed for freestanding installation only. This unit is not designed to be installed in a RV, garage or any outside installation. The surface of the compressor may become hot during normal operation. Do not touch as this may cause injury.
OTHER DANGERS
Keep the beverage center away from any combustible or volatile liquids or gases, including gasoline, oil, alcohol, paint, paint thinners and solvents. Such chemicals should never be stored in the unit.
DEFROSTING
Frost may develop on the interior back panel of the unit when the temperature setting is very low and the unit is not fully stocked with beverages. The presence of frost may force the unit to run continuously and thus increase internal temperature.
To defrost the beverage center:

1. Use the and buttons to increase the temperature until the compressor turns off.
2. Allow the internal ice/frost buildup to melt. Ensure the internal drain (located at the middle back of the lower shelf) is not clogged.
3. During this time, the melted frost flows through an internal drain into a holding pan on top of the compressor. The heat of the compressor evaporates the liquid.
4. Reset the temperature to 43°F and allow to cool for at least one hour.
5. Adjust to the desired temperature setting

CLEANING AND MAINTENANCE

It is important to periodically clean and maintain the beverage center. When performing maintenance, make certain the unit is unplugged from the power outlet.
Wipe the inner and outer surfaces of the beverage center clean with a damp cloth. If needed, use a gentle detergent or a solution of baking soda and water. Remove any residue with clean water and a soft cloth, then dry with another cloth.
Once clean, you may use a common kitchen appliance wax on outer surfaces.
Inspect, clean and maintain the rubber gasket around the door. A small amount of petroleum jelly applied to the bracket side of gaskets will keep the gasket pliable and ensure a good seal.
IMPORTANT:
– Do NOT use hot water, harsh detergents, gasoline, kerosene, solvents, acids or anything flammable to clean the beverage center. These can damage the paint and degrade the plastic components.
– Do NOT spray the beverage center with water as this may cause rust and degrade the insulation.
– Do NOT clean glass shelves with hot water when they are cold. Shelves may break if exposed to sudden temperature changes or impact. For your protection, tempered glass is designed to shatter into many small pebble-size pieces.
– If any replacement components are required, they must be obtained from Tramontina’s Customer Service Department. This ensures the correct replacement components are provided, and minimizes risk of possible ignition due to incorrect parts or improper service.

LED LIGHT REPLACEMENT

TOOLS NEEDED: Phillips screwdriver and flashlight to illuminate the work area.
If the LED light is not illuminating, the light most likely needs to be replaced. Replacement LED lights may be purchased from Customer Service
NOTE: The replacement light is NOT available from home improvement, hardware or discount stores. And this screwdriver is not included.
Removing the Existing LED Light
Unplug the beverage center.

1. Using a Phillips screwdriver, remove the two screws from the clear plastic cover.
2. Tilt the panel towards the front of the beverage center and unscrew the LED board from the black plastic spacer.
3. Gently unclip the power cable from the red socket insert on the LED board.

Installing the Replacement LED Light

• Insert the power cable into the red socket insert on the replacement LED board.
• Position within the black plastic spacer.
• Reassemble the LED board, spacer and cover together using the two screws.
• Tuck the cable into the wire slot.
• Reposition the panel and carefully enclose the cord within the LED housing.
• Reattach the clear plastic panel using two screws.

TROUBLESHOOTING

Verify unit is plugged into a standard power outlet and not a GFCI outlet (seepage 4).
Check if control panel is on.
The beverage center is too cold.| Adjust thermostat to higher number.
The beverage center is not cooling sufficiently.| Adjust thermostat to lower number. Ensure door is closedproperly.
Ensure the door gasket provides a proper seal. If you can slide a piece of paper between the gasket and unit body, the gasket is not sealing properly.
Unit may not have enough ventilation space around it.
Check if the sides of the unit are warm. If not, please contact Customer Service Department.
Do not put hot beverages in the beverage center.
The beverage center compressor runs for long periods.| Hot weather and/or frequent door opening will force the unit to work harder to keep cool.
Do not overload the beverage center.
Do not put hot beverages in the beverage center.
The beverage center door does not close properly.| Unit may be tilted – adjust front legs to level unit.
Align the door using a 5/16″ (8 mm) socket, adjusting the screws under the triangular bracket cover. For assistance, please contact Customer Service Department.
Side panel of beverage center is hot.| The unit exchange heats through the side walls, therefore does not indicate malfunction.
Usually happens when door is opened and closed frequently, or when operated in high temperature weather. Results from dissipation of heat from within the unit. Do not touch the panel. Does not indicate a malfunction.
Condensation forms on the glass door| Condensation forms under conditions of high humidity; does not indicate a failure. Wipe condensation with dry towel.
Relocate unit to a cooler area or adjust thermostat to a higher setting to balance out the exterior and interior temperatures. Condensation will dissipate as time goes on.
Sound of trickling water.| This is the refrigerant flowing. Does not indicate a malfunction.
Buzzing sound.| A buzzing noise is typically generated by the compressor when starting up or shutting down.
Odor.| Unit may require cleaning.

SAFETY WARNINGS

Before you use your beverage center, please read this owner’s manual carefully. Use this appliance only for its intended purpose as described in this owner’s manual.
DANGER – Risk of child entrapment. Before you throw away your old refrigerator or freezer

• Take off the doors.

• Leave the shelves in place so that children may not easily climb inside.

• The appliance must be correctly installed and connected to the power supply in accordance with the installation instructions before it is used.. (See: “ROW TO INSTALL”).

• The main power supply must be properly grounded.

• This beverage center must be positioned so that the plug is accessible. Never unplugthe unit by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet.

• Do not use an extension cord as this can negatively affect the performance of the unit.

• When transporting the beverage center, keep the unit in the upright position. Do not tilt the appliance beyond 45° or place the unit in upside down position. Do not tip over.

• Do not touch the cooled surfaces while the appliance operates, especially not with wet hands, because the skin may stick to the cold surfaces.

• It is recommended that the beverage center is positioned away from any combustible sources, such as gas, petrol, alcohol, lacquer and banana oil, etc. The aforementioned objects should not be stored in the beverage center under any circumstances.

• If the unit fails to cool properly, dispose of spoiled food as needed.

• Unplug your unit before cleaning or making any repairs.
  NOTE: If for any reason this product requires service, we strongly recommend that a certified technician perform the service. Repairs made by non-qualified personnel will void the warranty.

• Do not defrost the appliance with other electrical devices (hair dryer, etc.), and never scrape the ice or frost layer with sharp tools.
  Warning: Do not damage the refrigerant circuit.

• The rating plate is inside the appliance or outside on the rear or side wall.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

• Do not run cord over carpeting or other heat insulators. Do not cover the cord. Keep cord away from traffic areas, and do not submerge in water. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Repair or replace immediately all electric cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion along its length, the plug or the connector end.

• Do not operate your beverage center in the presence of explosive fumes.

• WARNING – Do not use flammable materials on or near the unit. This can result in fire and cause irreparable harm or damage to the unit.

• DANGER – Risk of Fire or Explosion. Flammable Refrigerant Used. To Be Repaired Only By Trained Service Personnel. Do Not Puncture Refrigerant Tubing.

• CAUTION – Risk of Fire or Explosion. Dispose of Property In Accordance With Federal or Local Regulations. Flammable Refrigerant Used.

• CAUTION – Risk of Fire or Explosion. Flammable Refrigerant Used. Consult Repair Manual/ Owner’s Guide Before Attempting to Service this Product. All Safety Precautions Must be Followed.

• CAUTION – Risk of Fire or Explosion Due to Puncture of Refrigerant Tubing; Follow Handling Instructions Carefully. Flammable Refrigerant Used.

REMOVE BEVERAGE CENTER DOOR BEFORE DISPOSING OF UNIT.
SUFFOCATION HAZARD:
The shelves should remain in the beverage center for disposal. This deters children from climbing into the unit, becoming trapped and potentially suffocating. All safety precautions must be followed.

PRODUCT SPECIFICATIONS

• CAPACITY OF BEVERAGE CENTER IN CU FT: 4.4 CU FT
• SHELF MATERIAL: GLASS
• TEMPERATURE CONTROL TYPE: ELECTRONIC TEMPERATURE CONTROL
• TEMPERATURE RANGE IN FAHRENHEIT ANDCELSIUS: 40T-61°F/4°C-16r
• DIMENSIONS
  • DEPTH (EXCLUDING HANDLES)(IN): 20.87
  • DEPTH (INCLUDING HANDLES)(IN): 22.44
  • DEPTH (LESS DOOR) (IN): 19.29
  • DEPTH WITH DOOR OPEN 90 DEGREES (IN): 40.16
  • HEIGHT TO TOP OF DOOR HINGE (IN.): 32.20
  • PRODUCT DEPTH (IN.): 22.44
  • PRODUCT HEIGHT (IN.): 32.20
  • PRODUCT WIDTH (IN.): 20.08

LIMITED WARRANTY

To make a warranty claim, please email support@curtiscs.com or call 1-800-968-9853.
1 Year Warranty
This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V-60Hz).
We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.

Canada CURTIS INTERNATIONAL LTD
7045 BECKETT DRIVE, UNIT 15
MISSISSAUGA, ONTARIO
L5S 2A3
Our home is your home.
Visit us if you need help with any of these things:
owner support
service
support@curtiscs.com
1-800-968-9853
FRIGIDAIRE is a pending or registered trademark of Electrolux
Home Products Inc. and used under a license from Electrolux Home Products, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>