better bathrooms 600mm Wall Hung Shelf User Manual

better bathrooms 600mm Wall Hung Shelf

Thank you for choosing Better Bathrooms. Below you will find important product information and instructions for usage:

Product Information

• Maximum weight limit: 100kg (600-800mm cabinet); 120kg (1200mm cabinet); 120kg (tall cabinet); 50kg (shelf only)
• For safety reasons, the unit must be secured to the wall using suitable fixings (pre-drilled holes provided in the back panel of the unit)
• When fitting a basin to a unit, a bead of silicone should be applied to the top edge of the basin unit to seal between the basin and unit
• The Round Basin/Brushed Gun Metal Round Basin product code is BeBa_27398/BeBa_27399/BeBa_27400
• The product requires single-person assembly, and we always recommend using professional tradespeople to install your product

Usage Instructions

Hinge Adjustment
To adjust the hinge:

1. For vertical adjustment, loosen screw A on all hinges. Adjust the door and retighten the screw.
2. For lateral adjustment, loosen screw B. Adjust the door and retighten the screw.
3. For horizontal adjustment of drawers, follow the steps to remove or install the drawer, then adjust the screw as needed.

Wall Hung Unit Installation

For wall-hung unit installation:

1. Measure the L distance between each bracket on the unit and the height as customers request. The standard height is 850mm (including basin height) from floor to wash basin.
2. Use suitable fixings (pre-drilled holes provided in the back panel of the unit) to secure the unit to the wall.
3. When fitting a basin to the unit, apply a bead of silicone to the top edge of the basin unit to seal between the basin and the unit.

Mirror Cabinet and Storage Unit

For mirror cabinet and storage unit installation:

1. Measure the L and H distance between each pre-drilled hole on the product, and fix them as below steps. The distance should be 300-400 from the mirror cabinet to the basin, and the distance from the floor to the bottom of the storage as the customer requests.
2. Use plug screws with chrome covers included in the box for installation.

Cleaning Instructions

To clean the unit:

• Clean with a soft cloth and warm soapy water only
• Do not use abrasive cleaning agents
• Dry the unit with a cloth after use

For more information, please visit betterbathrooms.com, email customerservices@buyitdirect.co.uk, call 0330 390 3062, or write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA. Better Bathrooms is part of the BuyitDirect Group.

• Thank you for choosing Better Bathrooms.
• Please read this manual before installing your product and keep for future reference.
• Multi-person assembly
• Tools required
• We always recommend using professional tradespeople to install your product

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers

We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day. As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100. We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

• log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
• contact us via betterbathrooms.com/content/contact-us

Important information

• Please read these instructions thoroughly and retain for future reference
• Maximum weight limit:100kg (600-800mm cabinet); 120kg (1200mm cabinet) 120kg (tall cabinet) 50kg(shelf only)

BATHROOM FURNITURE CUSTOMER CARE GUIDE

Please note that although these units have been designed to give years of pleasure and satisfaction, you will help maintain the original beauty of your bathroom by following these guidelines.

Melamine, Vinyl and Foil Wrapped Doors
Occasional marks, can in most cases, be removed with a soft damp cloth. More persistent marks can be removed using a non silicone based furniture cleaner. Hot soapy water should be avoided. Once the mark is removed, the area should be wiped over with a damp cloth to remove any excess and dried with a soft clean cloth. On no account should solvent or an abrasive cleaner be used as permanent damage to the finish could take place.

High Gloss Doors
Use a cleaning product not containing aggressive substances like acetone, alcohol, bleach … as those components could seriously damage the surface of the door. The best would be to use a soft cotton or micro fibre cloth with only water and soft soap (containing a maximum 1% of liquid soap)

Carcase Components
Do not use polish on any surfaces. A damp cloth with soapy water will clean off most marks or spills. Bleaches, scouring pads and multi-surface cleaners should not be used.

Drawers, Runners, Door Hinges
These should be wiped out with a damp soapy cloth and wiped dry with a soft cloth as necessary. The roller runners and hinges are lubricated and should not be cleaned with a degreasing agent as this will affect the action of the moving parts. Never lean on partially or fully opened doors and drawers in order to gain access to the units. The hinges are specified to adequately support the weight of the door, plus small additional weights such as wire accessories. It is advised that once the bathroom has been installed you should check every six months that all screws on the hinges are tight.

Worktops
Although the worktop is hard-wearing, sharp objects will scratch and excessive heat will scorch the surface. Care should be taken not to drop any heavy objects onto the worktop as the surface may crack. For cleaning, a damp soapy cloth will clean off most spills. Bleaches, scouring pads and multi-surface cleaners should not be used. Corrosive liquids and makeup should be wiped off immediately. On no account should any spillage, even water, be allowed to lie on the surface.

Temperature and Humidity
Avoid excessive changes in temperature and humidity. Always try to ensure adequate ventilation.

General care, spillages and splashes
On no account should any spillages or splashes, even water, be allowed to lie on any surface. All spillages and splashes should be wiped dry, failure to do so may shorten the life expectancy of the product and invalidate any guarantees.

Please spend 5 minutes reading this section before commencing with the installation of your new furniture.

1. Should any of your items have a defect, please do NOT install as returns will not be accepted once fitted.
2. We advise that you use a qualified person to install your units, as any issues relating to poor fitting will not be accepted by the supplier.
3. You have purchased a handmade and in some cases, hand painted product. Therefore, you may see some slight imperfections which the supplier may deem as acceptable.
4. This product is water resistant but NOT waterproof. On no account should any spillages or splashes, even water, be allowed to lie on any surface. All spillages and splashes should be wiped dry, failure to do so may shorten the life expectancy of the product and invalidate any guarantees.
5. Please avoid direct sunlight as this will cause the painted surfaces to discolour.
6. Due to motion in transit, the cabinet doors and drawers may need to be adjusted after installation.
7. Floor Standing units must be fitted back to the wall through the backtrail using suitable fixings. (not supplied)
8. Basin units should be fitted as above. The basin should also be secured where applicable using Fischer bolts through the fixing points under the basin. (not supplied) Note that not all basins have this facility.
9. Wall Hung units must be secured back to the wall using the wall-hanging brackets or suitable wall fixings when not supplied. Additional support is recommended using ‘L’ brackets. (not supplied)
10. When fixing a stud or paneled wall, the appropriate framework should be installed to support the basins and units.
11. Where units or worktops have to be cut out for services, all raw edges MUST be sealed against water ingress.

Hinge Adjustment

Drawers Remove/Install

• To Remove the Drawer: Follow step ‘A’ and remove the fastener then follow step ‘B’.
• To Install the Drawer: Follow step ‘B’ and then follow step ‘A’ to lock the fastener.
• Drawer position: If drawer position needs altering follow step ‘C’ to adjust the screw.

Tools required for installations

Note: For safety reasons Unit must be secured to the wall using suitable fixings (pre-drilled holes provide in back panel of unit) When fitting a basin to a unit, a bead of silicone should be applied to the top edge of the basin unit to seal between the basin and unit.

Installation

Wall-hung unit installation.( fixings in box) Please measure the L distance between each bracket on the unit. and H ( height as customers request. The standard height is 850mm (including basin height) from floor to wash basin This product is water resistant but NOT waterproof, on no account should any spillages or splashes,even water, be allowed to lie on any surface, all spillages and splashes should wipe dry failure todo so may shorten the life expectancy of the product and invalidate any guarantees. Where units or worktops have to be cut out for service, all raw edges MUST be sealed against water ingress. For cleaning, a damp soapy cloth will clean off most spills, Bleaches, scouring pads and multisurface cleaners should not be used. Corrosive liquids and make-up should be wiped off immediately. On no account should any spillage, even water,be allowed to lie on the surface.

Mirror cabinet and Storage unit. ( plug screws with chrome covers in box) Please measure the L&H distance between each pre-drilled holes on products.and fixing them as below steps.the distance will be 300-400 the mirror cabinet to the basin as below. the distance from floor to bottom of storage as customer requests.

CAUTION

• Clean with a soft cloth & warm soapy water only
• Do not use abrasive cleaning agents
• Dry unit with a cloth after use

For more information

• visit betterbathrooms.com
• email customerservices@buyitdirect.co.uk
• call 0330 390 3062
• write to Trident Business Park,Neptune Way, Huddersfield,HD2 1UA

Thank you for choosing Better Bathrooms. Please read this manual before installing your product and keep for future reference.

• Product name – Matt Black Round Basin/Brushed Brass Round Basin/Brushed Gun Metal Round Basin
• Product code – BeBa_27398/BeBa_27399/BeBa_27400
• Single-person assembly
• Tools required
• We always recommend using professional tradespeople to install your product

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day. As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100. We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

• log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
• contact us via betterbathrooms.com/content/contact-us

Important information

• Observe all local plumbing and building codes.
• Inspect the waste and supply tubing, and replace them if necessary.
• Prior to installation, unpack the new basin and carefully inspect it for damage. Return the basin to its protective carton until you are ready to install it.
• For replacement installation, make sure the existing cutout is the same or smaller size as the new basin.
• Make the correct size cutout as per the dimension drawing provided.
• The product complies with EN 146882015+A12018.

NOTE:
Your basin does not include an overflow, therefore please ensure the plug is always left open and tap is turned off when not in use to prevent any potential water spillage.

Parts / Diagrams

1. Stainless steel basin
2. Click-Clack pop-up waste

Tools required

• Safety Glasses
• Pencil
• Tape Measure
• Silicone/Gun
• Drill
• Adjustable Wrench
• Jigsaw

Dimensions

Installation

(If the basin is being installed onto an uncut top)

• Select the location of the basin on the top
• Allow enough space between the basin and mixer to the wall.
• Measure the diameter of the basin waste back nut and waste trapnut being used to determine the hole size required, then draw this onto the top for the hole to be drilled, if not pre-drilled.
• Drill a hole on the inside of the cutout mark to allow the insertion of a Jigsaw blade to cut the hole.
• Cut the opening in the countertop along the inside edge of the marked line.
• Drill the mixer installation hole accordingly to the mixer dimension if required.
• Apply silicone to any cut face and allow to dry to prevent moisture penetration
• Install the mixer to the top and the waste to the basin according to the manufacturer’s instructions.
• Apply sealant to the bottom edge of the basin.
• Carefully position the basin over the cutout, so the waste tail goes through the hole and press down firmly.
• Immediately wipe away any excess sealant, and fill any voids as needed.
• Verify that the basin has not moved out of position.
• Allow the sealant to dry before use.
• The connect the waste trap to the waste and water supply pipes to the mixer

Maintenance & Cleaning

• The surface of your decorated product can be easily scratched.
• Do not use bristle brushes, abrasive sponges or abrasive cleaners.
• Keep the basin clean and dry by wiping with a soft cloth after use.
• Do not allow cleaners to soak/dry onto the surfaces.

For more information

• visit betterbathrooms.com
• email customerservices@buyitdirect.co.uk
• call 03303903062
• write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA

References

• Better Bathrooms - Beautiful Bathrooms at Better Prices
• Better Bathrooms - Login

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>