niko 552-80699 Smart Plug with Pin Earthing User Manual

552-80699 Smart Plug with Pin Earthing
User Manual

Smart plug with pin earthing, Zigbee®

Packaging content

Radio specifications

Operating frequency ————————— 2.4 GHz
Maximum radio frequency power—————————10 dBm

Dimensions

Niko Home Control for traditional wiring ecosystem

Zigbee® Certified products

1. 552-00001: Wireless smart hub − recommended to install this device first

2. 552-72101: Connected single switch, Zigbee®

3. 552-72102: Connected double switch, Zigbee®

4. 170-33505: Connected switching socket outlet, Zigbee®

5. 552-72301: Connected motor control, Zigbee®

6. 552-72201: Connected dimmer, Zigbee®

7. 552-80699: Smart plug, Zigbee®

8. 552-80401: Wireless motion detector, Zigbee®
   Easywave products

9. 410-00001: Wireless switch with 2 buttons, Easywave

10. 410-00002: Wireless switch with 4 buttons, Easywave
    On your smartphone

11. Niko Home app

Continue reading
Scan the QR code for more information on the product operation and to explore examples of Niko Home Control on traditional wiring setups.

www.niko.eu/nhc-eco-tw

Minimum setup

Links to more information

Frequently asked questions (FAQ):

Scan the QR code to consult the website with frequently asked questions on Niko Home Control for traditional wiring.

https://www.niko.eu/nhc-faq

Technical information and troubleshooting
Scan the QR code to consult the technical manual for the smart plug, Zigbee®.

https://cdn.niko.eu/article/552-80699_en-GB_manualtechnical.pdf

Basic installation steps – Images − (written instructions on p.3 and p.4)

Continue reading
Scan the QR code for more detailed installation instructions, including programming instructions for the Niko Home app.

https://www.niko.eu/nhc-eco-tw

Before you get started

Difficulty level installation:
Difficulty level programming:
Estimated duration:

Wireless smart hub

Niko Home app

Hardware installation

Start using your installation

Reset procedure

More information

Scan the QR code on page 2 to open the online manual with more detailed installation instructions, including programming instructions for the app.

Before you get started

Prerequisites
You have a modern electrical installation. You have a wireless smart hub (552-00001) and a home network with an internet connection.
Before you get up and running, it is recommended to check the website page on the Niko Home Control for the traditional wiring ecosystems. You can access this page by scanning the QR code on page 1.
Difficulty level
Installation and configuration of the smart plug is plug and play.
Estimated duration
Between 10 and 20 minutes.
This product must be installed in accordance with national regulations.

Wireless smart hub

1. If you did not yet do so, install and register the wireless smart hub (552-00001). Follow the instructions in the accompanying manual.

Niko Home app

1. Download and install the Niko Home app on your smartphone. Log in and, if prompted, upgrade your Niko Home Control installation.

2. Use the app to add the smart plug to your installation.
   Start the pairing process by choosing Add a device and selecting Smart plug from the options.
   Hardware installation

3. When prompted by the app, plug the smart plug into a socket outlet.

4. The LED on the smart plug starts flashing orange and green alternately to indicate the smart plug is connecting to your Zigbee® network.

5. When the LED turns off, the smart plug is ready to use. You can now plug in a device.
   Warning: Do not stack smart plugs.
   Start using your installation

6. Start using your Niko Home Control installation. Use the app to program your devices to give them another function or have them start a routine. Check the online manual and ecosystem to get inspired.

Reset procedure

A Press and hold the button on the smart plug. The smart plug’s red LED first flashes for about 5 seconds and then turns on continuously.
B Let go of the button. After 3 seconds, the smart plug is reset and can be unplugged.
C When left plugged, the LED starts flashing orange and green alternately to indicate its search for a Zigbee® network. Since no connection can be established, the LED will eventually turn off.

LED behavior

| LED off: The smart plug is switched off, or the smart plug is not powered or malfunctioning.
Green LED continuously on: The smart plug is switched on and is working normally.
Orange and green LED flashing alternately: The smart plug is connecting to the Zigbee® network.
Green LED flashing: The smart plug is executing a software upgrade.
Red LED flashing: The smart plug is preparing a reset.
Red LED continuously on after flashing for 5 seconds: The smart plug is executing a reset.
Red LED continuously on: The smart plug has been used outside the normal operating conditions and has gone into over-temperature or load protection mode. Remove the plugged-in device and follow the troubleshooting instructions in the technical manual  (scan the QR code on page 1).
---|---

References

• Niko - home automation, switches, socket outlets and detector
• Niko Home Control - Ecosystem
• DIY User Manuals

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>