bonoch BBM05 Baby Monitor with 2 Cameras User Manual

June 9, 2024
bonoch

bonoch BBM05 Baby Monitor with 2 Cameras User Manual
bonoch BBM05 Baby Monitor with 2 Cameras

Overview

Packing List

  • Parent Unit x 1
  • Model: BBM03
  • Baby Unit (Camera) x 1
  • AC Power Adapter x 2
  • Screw Set x 1
  • Wall Mount Shim x 1
  • User Manual x 1

Model: BBM05

  • Baby Unit (Camera) x 2
  • AC Power Adapter x 3
  • Screw Set x 2
  • Wall Mount Shim x 2
  • User Manual x 1

Parent Unit

OVERVIEW

  1. 7” 720p HD Display

  2. Power on/o

  3. Volume+/Up

  4. Pan/Tilt

  5. Brightness-/Left

  6. Brightness+/Right

  7. OK/Switch

  8. Volume-/Down

  9. Menu

  10. Talk to baby

  11. Power/Charging LED

  12. Mic

  13. DC-jack

  14. Speaker

  15. Stand

  16. Removable Pre-installed Battery

  17. Light sensor

  18. CMOS sensor

  19. Mic

  20. Antenna

  21. Speaker

  22. Temperature sensor

  23. DC-jack

  24. Pair button

Getting Started

  1. Connect the AC power adapter with the camera. Next, plug the AC power adapter into a power socket

  2. Press for two seconds to turn on the parent unit.
    INSTRUCTION

  3. Set the parent unit to prepare for connecting.
    INSTRUCTION

  4. Press the PAIR button for two seconds until there is a before . (The baby unit has already been paired with the parent unit in factory settings. No repeated operation is needed.)

Camera Placement ( on the wall )

  1. Use the screwdriver to make two horizontal holes in the drywall. The distance between the two holes equals the distance between the two holes in the wall mount shim.

  2. Push two drywall anchors into the hole and screw them in until they are flush with the wall.
    INSTALLATION

  3. Position the wall mount over the anchor hole. Screw the screw into the hole, then secure the wall mount until it’s tight.
    INSTALLATION

  4. Put the baby unit (camera) into the wall mount.
    INSTALLATION

  5. Rotate the baby unit (camera) clockwise about 90 degrees until it clicks.
    INSTALLATION

Function Operation

  • Lullaby setting
    Function Operation

  • VOX mode
    Function Operation

  • Digital zoom
    Function Operation

  • Split screen set
    Function Operation

  • Pair the baby unit with the paent unit
    Function Operation

  • Delete the baby unit
    Function Operation

  • Temperature scale setting
    Function Operation

  • Temperature alert setting
    Function Operation

  • Time and time format setting
    Function Operation

  • Language setting
    Function Operation

  • Timer setting
    Function Operation

  • Warning alert volume setting
    Function Operation

  • Frequency setting
    Function Operation

  • Night Vision
    Function Operation

Switch Cameras

**Switch cameras manually

**

**Turn on multiple cameras scan mode

**

**Turn off multiple cameras scan mode

**

Maintenance and Warranty

Maintenance

  • Clean the surfaces of the baby and parent units with a soft, flu-free cloth.
  • All of the following maintenance procedures should only be performed when baby and parent units are unplugged and turned o.
  • If the units become dirty, use a slightly damp cloth to wipe surfaces. Take care not to allow water into any openings.

Warranty terms
This baby monitor comes with a one-year warranty (replace or refund) and lifetime technical support. The warranty terms do not apply to any product that has been subject to abuse, misuse, negligence, or accident. If you have warranty or support issues, please contact the customer service of Amazon seller before leaving your review.

Information on Product Disposal

Always dispose of your product (with a removable pre-installed battery) at the end of its life in an environmentally responsible way and following your local waste disposal requirements. All cardboard and paper packaging materials should be recycled following your local council waste regulations.

Warning and Safety Instructions

Follow these safety precautions to prevent fire, injury, or damage to the product and your baby. Read and keep instructions handy: It’s very important to read all the safety and operation instructions before use.

Warnings

STRANGULATION HAZARD:
Children may be entangled in cords. Keep the parent unit, baby unit, and AC power cord out of reach of your baby and children at all times. At least 6 feet away.

CHOKING HAZARD:
This product contains small parts which may choke a baby. Therefore, be careful when unpacking and assembling the product, and keep the small pieces away from children.

RISK OF SUFFOCATION:
Keep all packaging materials and protective foils out of reach of children.

DANGER FROM POWER CORDS:
To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib. In addition, never place the baby unit or parent unit inside your baby’s crib, bed, or playpen.

HANDLE WITH CARE:
The baby monitor is a high-sensitivity electronic device that must be handled with care. Do not handle roughly, drop or throw.

WATER AND MOISTURE:
The product should not be exposed to rain, moisture, or splashing. Therefore, never use or place the product in or near humidity and water.

Safety Instructions for AC Power Adapter

  • The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register, or other appliance that emits heat.
  • During continual use, the power adapters may become warm. This is normal and should not be a cause for concern.
  • Examine the intactness of the power cord and its plug before use.
  • The adapter must be handled with care: Do not handle it roughly, like a drop or throw.
  • Instead, when removing the power adapter from the wall outlet, hold and pull from the receptacle.
  • Do not pull on the cable itself, as it will put additional stress on the cable and could lead to damage.
  • Do not touch the power adapter with wet hands or allow liquids to spill on it.
  • Ensure the AC power adapter cables are kept out of reach of your baby and other young children at all times.
  • To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib.
  • Do not replace the plug or cable on your power adapter. This product should only be used with the AC power adapter supplied by the manufacturer, as included in this package.
  • Never cut or damage power cords.
  • Do not put any objects on top of the power cord, which could cause overheating, damage, combustion, and electrocution.
  • Do not leave the power adapter connected to the wall outlet when it is unplugged from the baby or parent unit.

WARNING

  • Do not replace the power cord with non-original substitutes. Improper connection may cause electrocution.
  • Never use a frayed cord.
  • They are intended for indoor use only.

Safety Instructions for Li-ion battery (Removable pre-installed battery)

  • Do not attempt to repair or adjust any electrical or mechanical functions of the unit.
  • Do not cut, open, crush, bend, puncture or shred cells and batteries.
  • If the battery leaks, do not let the battery liquid touch skin or eyes. If it happens, immediately flush the aected areas with water and seek medical assistance.
  • The battery should not be exposed to direct sunlight or heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat.
  • Do not modify, remanufacture, or attempt to insert foreign objects into the battery.
  • Do not immerse or expose it to water or other liquids.
  • Batteries may explode if damaged.
  • If you believe the battery is damaged, remove the product from charge and stop using the product.
  • Never use a damaged battery.
  • Improper use or using unapproved batteries may present a risk of fire, explosion, or other hazards.
  • Only use the battery pack supplied with the product or the same type sold by the manufacturer or its authorized distributors.

Troubleshooting

No signal on the Parent Unit
The power adapters may not be properly connected.
Make sure that the Baby and Parent Units are ON. Ensure the Baby Unit and Parent Unit are not far from each other. The baby Unit and Parent Unit may not be properly paired. Follow the PAIRING instructions.

Interference or poor connection
Move the Baby Unit closer to the Parent Unit.
The Baby or Parent Units may be too close to metal objects.
Other electronic devices may be interfering with the signal.
Maybe on a low battery.

Image frozen on the Parent Unit
Restart the Baby Unit (pull out the power adapter from the wall outlet, wait for approximately 5 seconds, and plug it back in).
Reset the Parent unit by opening the battery compartment and disconnecting the battery. Wait for 30 seconds and then reconnect the battery.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals