M-SMART SPIN TQD Height Adjustable With Hand Crank Instruction Manual
- June 9, 2024
- M Smart
Table of Contents
M-SMART SPIN TQD Height Adjustable With Hand Crank
Product Information
The M-SMART SPIN TQD is a product that has a height range of 1000-1900 mm and can hold up to 2 products with a width range of 600-1000 mm. It has a total of 4 wheels and 3 shelves, with a maximum load capacity of 6 kg per shelf. The product comes with several screws and bolts for assembly, including 10x M6x12, 8x M8x30, 1x M3x8, 16x ST5x13, 1x M1.5, 1x M2.5, 1x M4, and 1x M5.
Product Usage Instructions
- Start by unpacking all the components and hardware included in the product.
- Attach the wheels to the bottom of the base using the M6x12 screws.
- Attach the shelves to the vertical poles using the ST5x13 screws. Make sure to align the holes on the shelves with the holes on the poles.
- Attach the top pole to the vertical poles using the M8x30 screws. Make sure to tighten them securely.
- Attach the product holders to the vertical poles using the M5 screws. Make sure to align them with the holes on the poles.
- Attach the top cover to the top pole using the M2.5 screws.
- Attach the side panels to the vertical poles using the M4 screws. Make sure to align them with the holes on the poles.
- Attach the front panel to the base using the M1.5 screw and aligning it with the holes on the base.
- Insert the product holders into the designated slots on the shelves. Make sure they are securely in place.
- Place the products onto the holders and position them as desired.
Make sure to follow all instructions carefully and securely tighten all screws and bolts during assembly to ensure the stability and safety of the product.
DIMENSIONS
TOOLS AND PARTS INCLUDED
INSTALLATION INSTRUCTIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>