ProDVX APPC-10X-R23 Series Pro DVX Rockchip 25.6 cm Discorp User Guide

ProDVX APPC-10X-R23 Series Pro DVX Rockchip 25.6 cm Discorp

Product Information

Specifications

• Model: APPC-10SLB-R23 Series & APPC-10X-R23 Series
• Power Input: 12V DC
• Ports: HDMI out, LAN, Audio 3.5mm, Micro-USB/OTG USB-C
• Mounting: VESA 75 mount, Screw spec: M4*4 mm
• Optional Accessories: Barcode scanner, NFC module, Camera

Product Usage Instructions:

1. Step 1: Unboxing and Setup
   Take the contents out of the box and ensure all components are present.

2. Step 2: Mounting
   Install the wall/glass mount or desk stand following the designated mount/stand manual. Use a manual screwdriver for installation.

3. Step 3: Power Connection
   Connect the device to power using the provided power adapter or PoE+.

4. Step 4: Internet Connection
   Connect to the internet via Wi-Fi or LAN.

5. Step 5: Application Installation
   If applicable, install and configure the preferred application on the device.

Quick Connection Settings:

1. Plug in PoE+ cable or power adapter to turn on the display.
2. If using Wi-Fi, disable Ethernet connection before connecting to Wi-Fi.
3. In the settings menu, navigate to Network & internet and select Wi-Fi.
4. Turn on Wi-Fi and select the desired network for internet connection.
5. Install and configure the desired application. Remember to turn off ADB functionality after use.

FAQ

• Q: What should I do if my device contains a battery?
  A: Please return the product to a certified repair center for proper battery replacement. Improper disposal of batteries can be dangerous.

• Q: How can I dispose of this product respon sibly?
  A: To prevent harm to the environment, recycle the product responsibly through return and collection systems or contact the reseller for safe recycling.

• Q: How can I ensure compliance with RF exposure guidelines?
  A: Place the product at least 20cm away from nearby persons to maintain compliance with FCC & CE’s RF exposure guidelines.

APPC–10SLB-R23 Series & APPC-10X-R23 Series Quick Start Guide

This package contains:

How to start:

1. Step 1 : Take contents out of the box, make sure all components are present.

2. Step 2 : Install wall/glass mount or desk stand, check designated mount/stand manual for instructions.
   We strongly advise to use a manual screwdriver instead of power tools due to the risk of causing damage to the device.

3. Step 3 : Connect to power via power adapter or PoE+.

4. Step 4 : Connect to Internet through Wi-Fi or LAN.

5. Step 5 : If applicable, install and configure preferred application.

Quick connection settings

1. Step 1 : Plug in PoE+ cable or power adapter to turn on display. If using PoE+ for both power and data, proceed to the final step. If connection to Wi-Fi is preferred, first disable Ethernet connection before connecting to Wi-Fi. To connect to Wi-Fi, swipe up in the home menu to arrive in the app drawer. Once there, select Settings.
2. Step 2 : In the settings menu, go to Network & internet, located at the top of the menu.
3. Step 3 : In the Network & internet menu, select Wi-Fi.
4. Step 4 : Turn on Wi-Fi and select desired Wi-Fi network to connect to internet.
5. Step 5 : Install and configure desired application. NOTE: If using ADB, please remember to turn off the ADB functionality after use.

Optional accessories

Caution:
Please note this product contains a battery. Please return the product to a certified repair center for proper replacement of the battery; Disposal of a battery can be dangerous.

WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area can cause harmful interference in which case the user will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Europe/UK – EU/UK Declaration of Conformity

This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the Radio Equipment Directive This equipment is compliant with Class A of EN55032. In a residential environment this equipment may cause radio interference.

Correct Disposal of this product.
This marking indicates that this product should not be disposed with other (household) waste. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the reseller where the product was purchased. They can take this product for environmental safe recycling.
“FCC & CE RF Radiation Exposure Statement Caution: To maintain compliance with the FCC & CE’s RF exposure guidelines, place the product at least 20cm from near by persons.”
The suitable temperature for the ProDVX Display and accessories is 0°C-45°C.

Please check the website or scan the QR-code for more product information. www.prodvx.com/support
The information in this document is subject to change without notice. © 2023 ProDVX Europe B.V. All rights reserved.

References

• Support | ProDVX

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>