Lucci 286101 Kasa 1 Light Table Lamp Instruction Manual
- June 9, 2024
- Lucci
Table of Contents
286101 Kasa 1 Light Table Lamp
Product Information
The KASA 1 Light Table Lamp is a high-quality Lucci product that
requires a rated voltage of 220-240V~ 50Hz. The SKU number for this
product is 286101. It has a maximum rated wattage of 45 and uses an
ES/E27 lamp holder. The weight of the product is 0.8kg and its
dimensions are H: 300mm D:300mm.
Product Usage Instructions
-
Ensure that the product is fully assembled and ready to use for
the first time. -
Place the lamp on a stable and flat surface.
-
Insert the bulb into the lamp holder and screw it in
tight. -
Plug in the lamp to an electrical socket with a rated voltage
of 220-240V~50Hz. -
Turn on the lamp by using the switch located on the cord.
-
Do not touch the lamp when in use as it may be hot.
-
When changing the bulb, ensure that the lamp is turned off and
unplugged from the electrical socket. -
Keep the product away from water and other liquids to avoid
electric shock or damage to the product.
Please follow all safety tips and installation requirements
mentioned in the user manual to ensure correct function and safety
of the product. If you have any further queries, please refer to
the user manual or contact customer support.
Installation Instructions
KASA 1 LIGHT TABLE LAMP
SKU# 286101 Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct
function and safety, please read and follow all instructions carefully before
assembly, installation and use of the product. Please keep instructions for
future reference.
Warranty
· This portable luminaire is covered by a 12-month warranty valid for in-store
replacement or refund only. · The warranty period starts from the date of
purchase. Please retain the proof of purchase. · Warranty will be void if
there is any damage due to improper usage or modification to the portable
luminaire. · Failure to comply with the instructions in this manual may
increase the risk of damage or injury and will void the
warranty.
Installation Requirements
· Select a suitable location for this portable luminaire: – Ensure it is on a
flat and stable surface. – This portable luminaire is suitable for indoor use
only. – Do not place flammable material near or over the portable luminaire. –
Ensure the portable luminaire is not installed in direct line of an air
vent/system. – If the portable luminaire is placed in an area prone to
moisture, ensure that the area is well ventilated, and an appropriately rated
exhaust fan is used if required. Damage or corrosion caused by moisture is not
a product fault, and as such is not covered under warranty.
· Do not exceed the maximum wattage rating. · Take care not to pull any
electrical wires during unpacking as this may damage the connection. · Lay out
all the components on a smooth surface and make sure no components are missing
before assembling.
If parts are missing, return the complete product to the place of purchase for
inspection or replacement. · Check whether the luminaire has been damaged
during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for
inspection, repair or replacement. · Do not plug into the mains power socket
outlet before or during assembly. Only do so after the portable luminaire is
fully assembled and is ready to use for the first time.
Installation Directions
1. Remove all packaging material from the potable luminaire (E) and the lamp
shade (C). 2. Remove the lamp holder ring (B) from the lamp holder (D). 3.
Place the lamp shade (C) onto the lamp holder (D) and secure it using the lamp
holder ring (B). 4. Install a globe (A not included) into the lamp holder
(D). Do not exceed the maximum wattage rating. 5. Insert the plug (F) into the
mains power socket outlet and ensure it is fully plugged in. 6. Turn power on
at the mains power socket outlet. 7. Use the cord-line switch to turn the
portable luminaire ON/OFF.
1 |Page
v1.0 (10/2022)
Installation Instructions
Safety Tips
· Always ensure the power is OFF and the portable luminaire has cooled down
before performing any maintenance, cleaning, changing the globe or making any
adjustment to the portable luminaire.
· The external flexible cable or cord of this luminaire cannot be replaced; if
the cable or cord is damaged, the luminaire shall be destroyed.
· To avoid injury or damage to the luminaire, ensure that power leads and
screws are secure before connecting the power.
· Young children should be supervised to ensure that they do not play with the
portable luminaire. · Handle the luminaire and shade with care to avoid any
damage or breakage. · Select a suitable location away from liquids and
hazards. · To clean, wipe with a soft damp cloth. Do NOT soak or immerse the
product in water or other liquids. · Ensure that the luminaire does not come
in contact with corrosive chemicals/solvents or abrasive cleaners etc.
Specifications
SKU # Rated Voltage Rated Wattage Lamp Holder
Weight Dimensions
286101 220~240V~ 50Hz
45 MAX ES / E27
0.8kg H: 300mm D:300mm
2 |Page
v1.0 (10/2022)