LIFEWORKS BT1941 RGB Portable Wireless Speakers User Manual
- June 9, 2024
- LIFEWORKS
Table of Contents
BT1941 RGB Portable Wireless Speakers
User Manual
PRODUCT SPECIFICATIONS
-Wireless: V5.1
-Working distance:10M
-SNR:≥90db
-Battery:3.7V about1200mAh
-Normal volume playing time: about 3h
-Speaker driver: 45mm 2
-Power: 4Ω/3W 2
-Frequency response: 120Hz-20KHz
-Unit size: 68.4 ” 68.4 ” 161.5mm
-Unit weight: about 348g {not included accessories)
-Charging: 5V/500mA
-Charging time: about 3h
-Pairing name: BT1941 Speaker
KEY AND SLOT FUNCTION
- Use the provided Micro USB charging cable for charging. Simply conned the cable to a power source to start charging portable speakers.
- TF slot: Supports and plays MP3 format audio saved in TF Card.
- Supports and plays MP3 format audio.
- AUX Port: Use the Mini 3.5 aux cable provided to connect to other devices.
- Power switch: Press for 3-5 seconds to power on/power off.
- When in use, quick press to go back to last song. Long press to turn down the volume.
- When in use, quick press to go to next song. Long press to turn up the volume.
- Short presses to switch modes and cycle through the desired modes(USB card/TF card/Wireless/Line in/FM).
Quickly double-press to change LED light to Hashing light. Triple-press to
turn the LED Light on or ofF.
To answer phone call, quickly press the power button to answer call hands-
free. Quickly press again to hong up. Quickly press twice to call last number.
NOTE In the FM mode, connect the micro charging cable to get better FM
radio stations.
-When using a USB/TF card, please use FAT32 format.
-Wipe clean with dry cloth.
This device complies with port 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (21 this device must accept any interference received,
including interference that may cause undesired operation. Caution: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this device.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However,there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different From that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
Radiation Exposure Statement The device has been evaluated to meet general RF
exposure requirement in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>